DPA 4098 CORE Supercardioid Gooseneck Microphone
PRICE - Rs. 1,02,677
DPA 4098 CORE supercardioid gooseneck mic for podiums, conferences and interpretation: high intelligibility, XLR or MicroDot, black or white, 16-122 cm. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
The price shown is inclusive of all taxes. Contact / WhatsApp +91 89818 07755 / +91 91477 00677 to check if any offers or additional discounts are available. If available, we will gladly share a coupon code that you can apply at checkout for the best price. All payments are processed securely through Razorpay, our trusted payment gateway partner.
Acoustics
| Directional pattern | Supercardioid |
| Principle of operation | Pressure gradient |
| Cartridge type | Pre-polarised condenser |
| Frequency response | 20 Hz - 20 kHz |
| Effective frequency range ±2 dB, at 20 cm (7.9 in) | MicroDot: 80 Hz - 15 kHz with 3 dB soft boost at 8 - 15 kHz. XLR-3M: 100 Hz - 15 kHz with 3 dB soft boost at 8 - 15 kHz and permanent 2nd order low-cut filter at 80 Hz |
| Sensitivity, nominal, ±3 dB at 1 kHz | 16 mV/Pa; -36 dB re. 1 V/Pa |
| Equivalent noise level, A-weighted | Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A)) |
| Equivalent noise level, ITU-R BS.468-4 | Typ. 35 dB (max. 38 dB) |
| Distortion, THD < 1 % (CORE) | 130 dB SPL RMS, 133 dB SPL peak |
| Dynamic range (CORE) | Typ. 110 dB |
| Max. SPL, THD 10 % | 135 dB SPL peak |
Electrical
| Rated output impedance | From MicroDot: 30 - 40 Ω; from XLR connector or DPA XLR adapter: 100 Ω |
| Minimum load impedance | 2 kΩ |
| Cable drive capability | MicroDot: up to 300 m (984 ft) with DPA XLR adapter. XLR-3M: up to 100 m (328 ft) |
| Output balance principle | Signal balanced with XLR connector or DPA XLR adapter |
| Common mode rejection ratio (CMRR) | > 60 dB from 50 Hz to 15 kHz with DPA XLR adapter |
| Power supply (for full performance) | MicroDot: min. 5 V to max. 10 V through DPA adapter for wireless systems, or P48 phantom power with DPA XLR adapter. XLR-3M: P48 phantom power |
| Current consumption | Typ. 1.5 mA (microphone); 3.5 mA with DPA XLR adapter |
| Connector | MicroDot or XLR-3M |
| Polarity | +V at MicroDot pin for positive sound pressure (pin 2 on XLR connector or XLR adapter) |
Physical
| Weight, MicroDot | 16 cm: 12 g; 28 cm: 20 g; 43 cm: 28 g; 77 cm: 55 g; 122 cm: 67 g |
| Weight, XLR-3M | 20 cm: 75 g; 32 cm: 80 g; 47 cm: 88 g; 77 cm: 115 g; 122 cm: 127 g |
| Lengths | MicroDot: 16, 28, 43, 77, 122 cm (6, 11, 17, 30, 48 in). XLR-3M: 20, 32, 47, 77, 122 cm (8, 13, 18, 30, 48 in) |
| Microphone diameter | 5.7 mm (0.22 in) |
| Temperature range | -40 °C to 45 °C (-40 °F to 113 °F) |
| Relative humidity | Up to 90 % |
| Colours | Black, white |
Versions
| 4098-DC-G-B01-015 / -030 / -045 / -075 / -120 | Black, XLR: 20 / 32 / 47 / 77 / 122 cm |
| 4098-DC-G-B00-015 / -030 / -045 / -075 / -120 | Black, MicroDot: 16 / 28 / 43 / 77 / 122 cm |
| 4098-DC-G-W01-015 / -030 / -045 | White, XLR: 20 / 32 / 47 cm |
| 4098-DC-G-W00-015 / -030 / -045 | White, MicroDot: 16 / 28 / 43 cm |
Product overview
The DPA 4098 CORE supercardioid gooseneck microphone delivers high intelligibility and controlled directionality, with efficient rejection of background noise and radio frequency interference.
It is often the preferred mic when high speech intelligibility is paramount, for example in parliaments where multiple languages are simultaneously interpreted and the interpreters must catch every word and nuance in a split second to deliver the perfect translation. DPA gooseneck microphones have become a very popular choice for podium mics and conference rooms, as tabletop or ceiling mount.
The 4098 CORE comes in black or white, with an XLR or a MicroDot termination, and in lengths from 16 cm (6 in) to 122 cm (48 in). The XLR versions run on P48 phantom power and have a permanent 2nd order low-cut filter at 80 Hz; the MicroDot versions connect to wireless systems through a DPA adapter, or to P48 through a DPA XLR adapter.
| Pre-polarised condenser | Supercardioid |
| Sensitivity, nominal | 16 mV/Pa |
| Max. SPL, THD 10 %, peak | 135 dB |
| XLR or MicroDot, black or white | 16-122 cm |
Key features
- Outstanding audio quality
- Wireless podium mic capability (MicroDot)
- Highly directional, very isolated
- High rejection of radio frequency interference
- Sleek Scandinavian design
- Black or white; XLR or MicroDot; 16 to 122 cm
Versions
- MicroDot, black: 16, 28, 43, 77 and 122 cm
- MicroDot, white: 16, 28 and 43 cm
- XLR, black: 20, 32, 47, 77 and 122 cm
- XLR, white: 20, 32 and 47 cm
Which length for which use
- 16 cm MicroDot / 20 cm XLR: a good length for ceiling mounting
- 28 cm MicroDot / 32 cm XLR: sometimes used for ceiling-mounted solutions
- 43 cm MicroDot / 47 cm XLR: often used for tabletop solutions
- 77 cm XLR: often used for floor stand applications
- 122 cm XLR: a taller floor stand option
Made for
- Parliaments and simultaneous interpretation
- Podium and lectern microphones
- Conference and meeting rooms
- Tabletop and ceiling mounting
- Wireless podium mics
- Floor stands
In the box
- 4098 CORE gooseneck microphone in the version ordered
DPA 4098 CORE: frequently asked questions
XLR or MicroDot: which should I choose?
The XLR versions connect directly to P48 phantom power and include a permanent 80 Hz low-cut filter. The MicroDot versions connect to wireless systems through a DPA adapter (5 to 10 V), or to P48 through a DPA XLR adapter, with cable runs up to 300 m.
Which length do I need?
16 cm MicroDot or 20 cm XLR is a good length for ceiling mounting, 43 / 47 cm is often used on tables, and 77 cm and 122 cm are for floor stands.
Is it good for speech?
Yes. It delivers high intelligibility and controlled directionality with efficient rejection of background noise, which is why it is often chosen where speech intelligibility is paramount, such as interpretation in parliaments.
Which colours are available?
Black in all lengths, and white in the 16, 28 and 43 cm MicroDot and 20, 32 and 47 cm XLR versions.
Can it be used as a wireless podium mic?
Yes. The MicroDot versions connect to wireless systems through a DPA adapter, which supplies 5 to 10 V.
Where can I buy the DPA 4098 CORE in India?
The DPA 4098 CORE is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Simultaneous interpretation
Parliaments and conference centres with interpreters.
Connections
| Connect | To |
|---|---|
| 4098 CORE XLR | Delegate position |
| XLR-3M | Conference system with P48 |
Setup
- Place a 4098 at each speaking position.
- Aim the gooseneck at the speaker.
- Route the signal to the interpreters.
Tip: High intelligibility lets interpreters catch every word and nuance.
Workflow 2: Podium and lectern
Event venues, universities and houses of worship.
Connections
| Connect | To |
|---|---|
| 4098 CORE, 43 / 47 cm | Podium |
| XLR-3M | Mixer with P48 |
Setup
- Mount the microphone on the podium.
- Bend the gooseneck towards the speaker.
- Set the gain.
Tip: Efficient rejection of background noise keeps the voice clear.
Workflow 3: Wireless podium mic
Presenters who need a podium mic without cable runs.
Connections
| Connect | To |
|---|---|
| 4098 CORE MicroDot | DPA adapter |
| Adapter | Wireless bodypack transmitter |
Setup
- Connect the MicroDot end through the DPA adapter.
- Check that the transmitter supplies 5 to 10 V.
- Place the mic at the podium and set the level.
Tip: The MicroDot versions give wireless podium mic capability.
Workflow 4: Ceiling mounting
Installers covering meeting rooms from above.
Connections
| Connect | To |
|---|---|
| 4098 CORE, 16 cm MicroDot or 20 cm XLR | Ceiling |
| Microphone | Installed audio system |
Setup
- Choose the short length, a good length for ceiling mounting.
- Mount it and aim at the table.
- Connect to the system.
Tip: White versions blend into light ceilings.
Workflow 5: Tabletop in meeting rooms
Board and meeting rooms.
Connections
| Connect | To |
|---|---|
| 4098 CORE, 43 cm MicroDot or 47 cm XLR | Table |
| Microphone | Conference mixer |
Setup
- Place the microphone at the seat.
- Aim it at the speaker.
- Set the gain.
Tip: High rejection of radio frequency interference near phones and laptops.
Workflow 6: Floor stand
Stages and halls.
Connections
| Connect | To |
|---|---|
| 4098 CORE XLR, 77 or 122 cm | Floor stand |
| XLR-3M | Console with P48 |
Setup
- Use the 77 cm or 122 cm XLR version.
- Aim at the speaker.
- Set the gain.
Tip: The 122 cm version is a taller floor stand option.
