DPA 4099 CORE Supercardioid Instrument Microphone, Extreme SPL
PRICE ON ENQUIRY
DPA 4099 CORE Extreme SPL supercardioid instrument mic with MicroDot for drums, percussion and loud brass, 152 dB SPL; mic only or with drum or brass clip. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our trusted payment gateway partner.
Acoustics
| Directional pattern | Supercardioid |
| Principle of operation | Pressure gradient |
| Cartridge type | Pre-polarised condenser |
| Frequency response | 20 Hz - 20 kHz |
| Effective frequency range ±2 dB, at 20 cm (7.9 in) | 80 Hz - 15 kHz with 2 dB soft boost at 10 - 12 kHz; second order low-cut filter at 80 Hz with DAD4099-BC |
| Sensitivity, nominal, ±3 dB at 1 kHz | 2 mV/Pa; -54 dB re. 1 V/Pa |
| Equivalent noise level, A-weighted | Typ. 28 dB(A) re. 20 µPa (max. 31 dB(A)) |
| Distortion, THD < 1 % | 134 dB SPL RMS, 137 dB SPL peak |
| Dynamic range | Typ. 109 dB |
| Max. SPL, THD 10 % | 152 dB SPL peak (label colour yellow) |
| Sensitivity selection tolerance (at 1 kHz) | ±1 dB |
Electrical
| Rated output impedance | From MicroDot: 30 - 40 Ω; from DAD4099-BC or DAD6001-BC: 100 Ω |
| Cable drive capability | Up to 300 m (984 ft) with DAD6001-BC / DAD4099-BC XLR adapter |
| Output balance principle | Signal balanced with DAD4099-BC or DAD6001-BC XLR adapter |
| Common mode rejection ratio (CMRR) | > 60 dB from 50 Hz to 15 kHz with DAD4099-BC or DAD6001-BC XLR adapter |
| Power supply (for full performance) | Wireless systems: min. 5 V - max. 10 V through DPA adapter; with DAD6001-BC or DAD4099-BC: P48 phantom power, will work from 12 V |
| Current consumption | Typ. 1.5 mA (microphone); 3.5 mA with DAD4099-BC or DAD6001-BC XLR adapter |
| Connector | MicroDot |
| Polarity | +V at MicroDot pin for positive sound pressure (pin 2 on DAD4099-BC or DAD6001-BC XLR adapter) |
Physical
| Weight, microphone | 17 g (0.60 oz) |
| Microphone diameter | 5.7 mm (0.22 in) |
| Microphone length | 45 mm (1.8 in) |
| Gooseneck length | 140 mm (5.5 in) |
| Cable length | 1.8 m (5.9 ft) |
| Cable diameter | 1.6 mm (0.06 in) / 2.2 mm (0.09 in) |
| Temperature range | -40 °C to 45 °C (-40 °F to 113 °F) |
| Relative humidity | Up to 90 % |
| Colour | Black |
Versions
| 4099-DC-2 | Extreme SPL, microphone only |
| 4099-DC-2-201-D | Extreme SPL with clip for drum |
| 4099-DC-2-199-T | Extreme SPL with clip for brass |
Product overview
The DPA 4099 CORE Extreme SPL is a supercardioid instrument microphone for close-miking extremely loud instruments, such as drums, percussion and some brass, with natural sound and well-balanced isolation from surrounding instruments.
The supercardioid polar pattern and linear off-axis response give well-balanced isolation from neighbouring instruments and superior gain before feedback, and the lightweight, discreet design blends into the performance. The Extreme SPL version is marked yellow and handles 152 dB SPL peak (THD 10 %).
The 4099 CORE connects with a MicroDot connector. With the DAD6001-BC or DAD4099-BC XLR adapter it runs on P48 phantom power and drives cables up to 300 m; the DAD4099-BC adds a second order low-cut filter at 80 Hz. For wireless systems it needs 5 to 10 V through a DPA adapter.
Three versions are offered: the microphone only, with the clip for drum, or with the clip for brass. The clip attaches to the gooseneck, so the capsule position is easy to adjust for close-miking.
| Pressure-gradient condenser | Supercardioid |
| Max SPL, THD 10 %, peak | 152 dB |
| Dynamic range, typ. | 109 dB |
| Microphone weight | 17 g |
Key features
- Supercardioid pattern with linear off-axis response
- High SPL handling: 152 dB SPL peak (THD 10 %)
- Superior gain before feedback
- Well-balanced isolation from surrounding instruments
- Lightweight, discreet design: 17 g, 5.7 mm diameter
- MicroDot connector; XLR adapters for P48 or DPA adapters for wireless
- Versions with clip for drum or brass
Made for
- Drums and percussion
- Trumpet and other very loud brass
- Live rock band performances
- Wireless brass players
In the box
- 4099 CORE Extreme SPL microphone
- With 4099-DC-2-201-D: clip for drum
- With 4099-DC-2-199-T: clip for brass
DPA 4099 CORE Extreme SPL: frequently asked questions
What is the Extreme SPL version for?
It is designed to close-mic extremely loud instruments, such as drums, percussion and very loud brass like the trumpet. It handles 152 dB SPL peak at THD 10 % and is marked yellow.
Which connector does the 4099 CORE use?
MicroDot. Connect it to the DAD6001-BC or DAD4099-BC XLR adapter for P48 phantom power, or to a DPA adapter for wireless systems.
What does the DAD4099-BC adapter add?
A second order low-cut filter at 80 Hz.
Which versions are available?
Microphone only (4099-DC-2), with clip for drum (4099-DC-2-201-D) and with clip for brass (4099-DC-2-199-T).
How long can the cable run be?
Up to 300 m (984 ft) with the DAD6001-BC or DAD4099-BC XLR adapter.
Where can I buy the DPA 4099 CORE Extreme SPL in India?
The DPA 4099 CORE Extreme SPL is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Snare and toms
Drummers and live sound engineers.
Connections
| Connect | To |
|---|---|
| 4099 CORE Extreme SPL | Clip for drum |
| MicroDot | DAD6001-BC XLR adapter, console with P48 |
Setup
- Mount the microphone on the drum with the drum clip.
- Aim the capsule with the gooseneck.
- Connect the XLR adapter, switch on P48 and set the gain.
Tip: 152 dB SPL peak handling for close-miked drums.
Workflow 2: Percussion
Percussionists on stage.
Connections
| Connect | To |
|---|---|
| 4099 CORE Extreme SPL | Clip on the instrument |
| MicroDot | XLR adapter, console with P48 |
Setup
- Fit the clip to the instrument.
- Position the capsule close to the source.
- Connect and set the gain.
Tip: The supercardioid pattern isolates the instrument from its neighbours.
Workflow 3: Trumpet
Trumpet players and engineers.
Connections
| Connect | To |
|---|---|
| 4099 CORE Extreme SPL | Clip for brass on the bell |
| MicroDot | DAD4099-BC XLR adapter, console with P48 |
Setup
- Clip the microphone to the bell.
- Aim the capsule.
- Connect via the DAD4099-BC and set the gain.
Tip: The DAD4099-BC adds a second order low-cut filter at 80 Hz.
Workflow 4: Brass section
Engineers reinforcing horn sections.
Connections
| Connect | To |
|---|---|
| Several 4099 CORE Extreme SPL | Clips for brass |
| XLR adapters | Console inputs with P48 |
Setup
- Fit a microphone to each instrument.
- Set each capsule close to the bell.
- Balance the section.
Tip: Superior gain before feedback on loud stages.
Workflow 5: Wireless brass
Players who move around the stage.
Connections
| Connect | To |
|---|---|
| 4099 CORE (MicroDot) | DPA adapter for the wireless bodypack transmitter input |
| Bodypack transmitter | Wireless receiver |
Setup
- Mount the microphone on the instrument.
- Connect it to the transmitter through a DPA adapter.
- Check that the transmitter supplies 5 to 10 V and set the level.
Tip: The microphone needs 5 to 10 V through the DPA adapter.
Workflow 6: Long cable runs
Large stages and installations.
Connections
| Connect | To |
|---|---|
| 4099 CORE | DAD6001-BC or DAD4099-BC |
| XLR cable up to 300 m | Console with P48 |
Setup
- Connect the microphone to the XLR adapter.
- Run balanced XLR cable to the console.
- Switch on P48.
Tip: The XLR adapters drive cables up to 300 m (984 ft).
