ECLER ARQISSB10i

Product overview

The ECLER ARQISSB10i is a wooden 10 inch subwoofer cabinet for architectural installations, delivering 150 W RMS at 8 Ω, with an internal low-pass filter, 12 x M8 rigging points and an included wall bracket.

Part of the ARQISi series, designed for permanent installations where sound performance and interior design must match, the ARQISSB10i covers 54 Hz to 4 kHz (-10 dB) with 92 dB sensitivity and up to 120 dB peak SPL. Its MDF cabinet has a textured, scratch resistant finish and an overlapping steel grille with a rotatable logo, in black (RAL 9005) or white (RAL 9003).

Key features

• Subwoofer, 1-way architectural loudspeaker
• 150 W RMS at 8 Ω, 600 W peak
• 1 x 10 inch low frequency woofer
• Euroblock connector and spring-loaded input terminals
• Internal low-pass filter with two frequency settings
• Wall bracket included
• 12 x M8 cabinet flying points
• White (RAL 9003) and black (RAL 9005); acoustic simulation data files available

Designed for architecture

The ARQISSB10i measures 600 x 442 x 228 mm and weighs 16.5 kg. Its MDF enclosure has a textured, scratch resistant paint finish and an overlapping steel grille with a rotatable logo, giving a slim and elegant impression on the wall, on the floor or flown.

Connections and filter

A recessed rear panel carries a Euroblock connector, spring-loaded terminals in parallel for linking, and the internal low-pass filter switch (OFF, 120 Hz or 150 Hz according to the ARQISi series manual). ECLER recommends a 300 W RMS amplifier and a 60 Hz high-pass protection filter with at least 12 dB/octave.

Mounting

The included wall bracket holds the cabinet close to the wall, four rubber feet allow floor or desktop use, and twelve M8 points allow flying from a structure with steel cables. A redundant safety system is mandatory whenever a wall or ceiling bracket is used.

In the box

• 1 x ARQISSB10i loudspeaker
• 1 x wall mounting bracket
• 4 x screws
• 4 x rubber feet
• 1 x Euroblock
• Quick user guide
• Warranty card

Available versions

• ARQISSB10i black (RAL 9005): reference CARQISSB10IB
• ARQISSB10i white (RAL 9003): reference CARQISSB10IW

ECLER ARQISSB10i: frequently asked questions

What amplifier does the ARQISSB10i need?

An 8 Ω channel; ECLER recommends 300 W RMS, with a 60 Hz high-pass protection filter of at least 12 dB/octave.

Does it have a low-pass filter?

Yes, an internal low-pass filter with two frequency settings, selected on the rear panel.

How can it be installed?

On a wall with the included bracket, on a surface or desk with the rubber feet, or flown using its 12 x M8 points.

Which colours are available?

Black (RAL 9005, CARQISSB10IB) and white (RAL 9003, CARQISSB10IW).

Where can I buy the ECLER ARQISSB10i in India?

The ECLER ARQISSB10i is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Hotel lobby

Low-end support for ARQISi full-range cabinets in a lobby or lounge.

Connections

Setup

1. Mount the subwoofer on the wall bracket with a safety sling.
2. Set the internal low-pass filter to blend with the satellites.
3. Set a 60 Hz high-pass protection on the amplifier or processor.
4. Balance levels from the seating areas.

Tip: ECLER recommends a 300 W RMS amplifier.

Workflow 2: Restaurant

Fuller background music without visible floor boxes.

Connections

Setup

1. Choose black or white to match the walls.
2. Fix the wall bracket and hang the cabinet.
3. Wire with at least 2.5 mm² cable for runs up to 10 m.
4. Set the level for dining.

Tip: The overlapping grille has a rotatable logo for horizontal or vertical use.

Workflow 3: Corporate auditorium

Bass for presentations and video playback.

Connections

Setup

1. Place the subwoofers on the floor at the front for the highest output.
2. Link the second unit from the second connector.
3. Check the parallel load on the amplifier.
4. Set the low-pass filter and levels.

Tip: Two 8 Ω units in parallel present 4 Ω.

Workflow 4: Retail flagship

Music with weight in a design-led store.

Connections

Setup

1. Fly the subwoofer from a truss using its M8 points and steel cables.
2. Add a redundant safety cable.
3. Set the low-pass filter.
4. Set levels across the store.

Tip: Never suspend the cabinet by any handle; use the M8 points.

Workflow 5: Education

Classrooms and lecture halls with media playback.

Connections

Setup

1. Stand the subwoofer on its rubber feet or wall-mount it.
2. Connect and respect the polarity.
3. Set the 60 Hz high-pass protection.
4. Set a comfortable level.

Tip: Keep obstacles out of the path to the audience.

Workflow 6: Gym and leisure

Energy for training rooms and bars.

Connections

Setup

1. Wall-mount the cabinet out of reach.
2. Set the low-pass filter to match the full-range speakers.
3. Wire the amplifier.
4. Raise the level gradually.

Tip: Use 4 or 6 mm² cable for longer runs.