ECLER EDGE-SB110P

Product overview

The ECLER EDGE-SB110P is an ultra-compact 10 inch powered subwoofer, only 181 mm high, with 120 W amplified output, a 50 Hz to 250 Hz variable low-pass filter, a phase inverter and auto-standby.

Designed for small spaces such as underneath restaurant seats, or wall-mounted in a corner with the included bracket, the EDGE-SB110P covers 23 Hz to 465 Hz (-10 dB) with 97 dB sensitivity and up to 124 dB peak SPL. Balanced Euroblock and unbalanced RCA inputs and stack outputs make it easy to add to any system, and it can lie flat, stand vertically or hang on the wall.

Key features

• Ultra-compact powered subwoofer with a 10 inch driver
• 120 W amplified power output
• Balanced (Euroblock) and unbalanced (RCA) input
• Balanced (Euroblock) and unbalanced (RCA) stack output
• 50 Hz to 250 Hz variable low-pass filter
• Auto-standby and phase inverter
• Black (RAL 9005); flat on a tabletop, under seats, vertical or wall-mounted
• Acoustic simulation data files available

Bass that hides

At 635 x 181 x 414 mm the EDGE-SB110P fits under seats, tables and furniture. Low frequencies are non-directional, so it can sit in corners or behind curtains without notably affecting its output; placing it close to surfaces increases efficiency.

Connections and controls

A balanced Euroblock input and two RCA inputs accept a mono or stereo line-level signal, summed to mono inside. Euroblock and RCA stack outputs copy the input to a second unit. VOLUME, LPF, AUTO-STBY and PHASE controls and ON/STBY and SIGNAL LEDs are on the rear panel.

Three ways to install

Lay it flat on the four rubber feet, stand it vertically on the two floor supports, or fix the two wall brackets and hang it (dowels and screws not supplied).

In the box

• 1 x EDGE-SB110P
• 4 x rubber feet
• 1 x vertical floor support
• Wall support system (screws not included)
• 1 x EU AC power cord (3 x 1.5 m)
• 1 x RCA-RCA stereo interconnection cable
• First Steps Guide
• Warranty card

Available versions

• EDGE-SB110P black (RAL 9005): reference CEDGESB110P

ECLER EDGE-SB110P: frequently asked questions

Does the EDGE-SB110P need an external amplifier?

No. It is a powered subwoofer with a built-in 120 W amplifier and runs from mains power.

Can it be hidden under seating?

Yes. It is only 181 mm high and is designed for spaces such as underneath restaurant seats.

Can two units be used together?

Yes. The Euroblock and RCA stack outputs carry a copy of the input signal to a second unit.

Does it switch off automatically?

With AUTO-STBY on, it enters standby after a few minutes without input signal and returns to on when signal is detected.

Where can I buy the ECLER EDGE-SB110P in India?

The ECLER EDGE-SB110P is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Restaurant seating

Hidden bass under banquette seats.

Connections

Setup

1. Lay the subwoofer flat on its rubber feet under the seat.
2. Connect the line output to the RCA inputs.
3. Set the LPF to match the ceiling or wall speakers.
4. Set VOLUME and switch AUTO-STBY on.

Tip: Placing it close to surfaces increases efficiency.

Workflow 2: Retail store corner

Wall-mounted bass in a shop corner.

Connections

Setup

1. Fix the two wall brackets in the corner.
2. Hang the subwoofer on the brackets.
3. Wire the balanced Euroblock input.
4. Adjust LPF and PHASE for a smooth blend.

Tip: The level is highest on the ground in a corner.

Workflow 3: Meeting room

Low end for video calls and presentations.

Connections

Setup

1. Place the subwoofer under the table or a credenza.
2. Connect the RCA inputs.
3. Set the PHASE to 0° or 180° for the best bass at the seats.
4. Set the VOLUME.

Tip: It switches to standby after a few minutes without signal and wakes with signal.

Workflow 4: Two subwoofers

More bass in a larger space.

Connections

Setup

1. Place the two units apart in the room.
2. Link the stack output of the first to the input of the second.
3. Set the same LPF on both.
4. Balance the levels.

Tip: The stack output carries a copy of the input signal.

Workflow 5: Hotel lounge

Background music with depth behind curtains or furniture.

Connections

Setup

1. Stand the subwoofer vertically on the floor supports behind a curtain.
2. Connect the balanced input.
3. Set the LPF to blend with the main speakers.
4. Set the VOLUME.

Tip: Low frequencies are non-directional: hidden placement does not notably affect the output.

Workflow 6: Gym and wellness

Extra energy for studio classes.

Connections

Setup

1. Place the subwoofer on the floor in a corner.
2. Connect and switch on with the ON/OFF switch.
3. Set LPF and VOLUME.
4. Check the SIGNAL LED.

Tip: Adapt the level to the needs of the space.