ECLER LABI1-C100i

Product overview

The ECLER LABI1-C100i is a versatile and discreet full-range passive column loudspeaker, 100 cm tall, with twelve 3 inch drivers and 300 W AES, designed for indoor and outdoor fixed installations and portable applications.

Each of the twelve 3 inch drivers has a 0.75 inch neodymium voice coil. The slim stainless steel profile lets the column be installed in several ways with the LABI1 accessories: on a LABI1 subwoofer, on a wall, a pole or a truss, or horizontally on a floor or table. Use it on its own or combine it with other LABI1-C100i columns and LABI1 subwoofers for a complete system that is easy to mount.

Key features

• Full-range passive 100 cm column with twelve 3 inch drivers
• 0.75 inch neodymium voice coils, 300 W AES / 1200 W peak at 8 Ω
• 96 dB sensitivity and 121 dB continuous maximum SPL
• 4-pole locking and 2-pin Euroblock inputs, each with a LINK output
• 1.5 mm stainless steel enclosure in black (RAL 9005)
• Several mounting options with the LABI1 accessories
• Ready for outdoor applications: IP54 with the LABI1-ODCNX outdoor kit

Connections

The panel carries a Euroblock input and a 4-pole locking input (1+ live, 1- ground), with matching Euroblock and 4-pole LINK outputs to feed the next column. With the LABI1-ODCNX outdoor kit fitted, only the Euroblock connection can be used. ECLER recommends an amplifier of 600 W.

Acoustic centre and stacking

The acoustic centre of the column is between the six top drivers, so set the operating height there. The column is in its normal position with the ECLER logo at the bottom; when two columns are stacked with the LABI1-CAC adapter, the upper column is mounted upside down to create a single acoustic centre.

LABI1 accessories (optional)

• LABI1-SAC: column to subwoofer adapter
• LABI1-CAC: column to column adapter (stacking only, not for flying)
• LABI1-TBC: column to truss adapter
• LABI1-WBC: column wall bracket
• LABI1-PBC: column to 35 mm pole bracket
• LABI1-HBC: horizontal floor or table mounting
• LABI1-ODCNX: outdoor connections cover
• LABI1-CFC: flight case for two columns

In the box

• 1 x LABI1-C100i column loudspeaker
• 1 x 60 cm 4-pole locking loudspeaker cable

ECLER LABI1-C100i: frequently asked questions

Can the LABI1-C100i be used outdoors?

Yes, with the LABI1-ODCNX outdoor kit fitted it is rated IP54; in that case only the Euroblock connection is used.

How can it be mounted?

With the LABI1 accessories it mounts on a LABI1 subwoofer, on a wall, a 35 mm pole or a truss, or horizontally on a floor or table.

Can two columns be stacked?

Yes, with the LABI1-CAC adapter. The upper column is mounted upside down so the pair has one acoustic centre. The adapter is for stacking only, not for flying.

What amplifier power does it need?

ECLER recommends an amplifier of 600 W into the 8 Ω nominal impedance.

Where can I buy the ECLER LABI1-C100i in India?

The ECLER LABI1-C100i is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Restaurant or bar on a wall

Discreet full-range columns for hospitality.

Connections

Setup

1. Fit the LABI1-WBC wall bracket to each column.
2. Mount the columns with the acoustic centre at listening height.
3. Wire the inputs and link the second column.
4. Set the amplifier level.

Tip: The acoustic centre is between the six top drivers: use it to set the height.

Workflow 2: Column on a LABI1 subwoofer

A compact full-range system for events and leisure venues.

Connections

Setup

1. Attach the LABI1-SAC to the subwoofer and secure it with the key.
2. Place the column on the adapter and secure it with the screw.
3. Connect the column to the subwoofer output.
4. Check the level of the full system.

Tip: Stack two columns with the LABI1-CAC for a taller line, with the upper column upside down.

Workflow 3: Sports and wellness on a pole

Sound for gyms and training areas.

Connections

Setup

1. Attach the LABI1-PBC to the column.
2. Mount it on a 35 mm pole and tilt it as needed.
3. Secure the tilt with the screw.
4. Link further columns.

Tip: The 100° horizontal dispersion covers wide floors from one column.

Workflow 4: Outdoor terrace

Music on terraces and patios.

Connections

Setup

1. Pass the cable through the LABI1-ODCNX frame and its round hole.
2. Screw the outdoor cover over the connections.
3. Fit the cable gland for a sealed entry.
4. Mount the column on its bracket.

Tip: With the outdoor kit only the Euroblock connection is used; the column is then rated IP54.

Workflow 5: Truss-mounted stage fill

Fill or delay columns on a truss.

Connections

Setup

1. Attach the LABI1-TBC at the top or middle of the column.
2. Secure it with the screw.
3. Hang it on the truss.
4. Aim it at the audience area.

Tip: Use the LABI1-CAC only for stacking, never for flying.

Workflow 6: Floor or table use

Temporary set-ups for presentations.

Connections

Setup

1. Lay the column on the LABI1-HBC foam pieces.
2. Choose 0°, 30° or 45° inclination.
3. Connect and link the columns.
4. Set the level for speech or music.

Tip: The LABI1-CFC flight case holds two columns with wiring and mounting accessories.