ECLER NIMBO-26 CR

Product overview

The ECLER NIMBO-26 CR is the RAL customisation version of the NIMBO-26: a premium 2-way passive loudspeaker with 140 W RMS, two 6.5 inch woofers and a 1 inch silk tweeter, with the enclosure painted in the RAL colour of your project, a black grille and a black bracket.

With its cloud-inspired design, created by ECLER engineering together with architects and interior designers, the NIMBO-26 delivers extended low frequency response from a compact enclosure. The tweeter sits in the acoustic centre so the loudspeaker acts as a single point source with wide 210° x 228° (H x V) dispersion. It is weather-protected to IP44 for outdoor use, and its impedance can be set to 4 Ω or 16 Ω with a switch behind the front logo.

Key features

• 2-way passive loudspeaker for surface mounting, 140 W RMS (560 W peak)
• 2 x 6.5 inch woofers with 4-layer voice coil for power handling and low frequency response
• 1 inch silk dome tweeter with neodymium magnet and ferrofluid, in the acoustic centre
• Selectable impedance: 4 Ω or 16 Ω, by a front toggle switch behind the logo, without removing the grille
• Bass reflex port and wide dispersion pattern
• Non-resonant enclosure in ABS reinforced with fibreglass, aluminium grille
• INPUT and STACK Euroblock connectors for parallel connection
• VEASY bracket (VESA 100) included, with tilt and pan adjustment by a single screw
• IP44 weather protection for outdoor applications
• RAL customisation: enclosure in your RAL colour, black grille and bracket

Your colour, your space

ECLER offers RAL paint customisation for the NIMBO-26. The CR version is painted in the RAL colour requested for the project and pairs it with a black grille and a black VEASY bracket, so the loudspeaker can match a façade, a wall or a corporate colour. The standard NIMBO-26 finishes are white (RAL 9003), black (RAL 9005), gold (RAL 1036 approx.) and titanium (RAL 9007 matt).

Indoor and outdoor installation

The VEASY bracket is robust, quick and easy to install, with jumps and markings for repeating the speaker orientation. In outdoor installations, guide the cables in a loop into the rubber grommets from bottom to top, drill the grommets with a round tool and use round-profile cables. ECLER recommends an amplifier of 280 W RMS.

Connections

The INPUT Euroblock takes the line from the amplifier and the STACK Euroblock links the next loudspeaker in parallel. Always respect the polarity, and use at least 2.5 mm² cable for runs up to 10 m (4 or 6 mm² for longer runs).

In the box

• 1 x NIMBO-26 loudspeaker
• 1 x VEASY wall bracket with vertical and horizontal adjustment (VESA compatible)
• 2 x Euroblock
• First Steps Guide
• Warranty card

Available versions

• NIMBO-26 CR, RAL customisation (black grille and bracket): reference CNIMBO26CR

ECLER NIMBO-26 CR: frequently asked questions

What does CR mean?

CR is the RAL customisation version of the NIMBO-26: the enclosure is painted in the RAL colour you specify, with a black grille and a black bracket.

Can the NIMBO-26 be installed outdoors?

Yes. It is weather-protected with an IP44 rating and works from -20 °C to 70 °C.

How do I change the impedance?

A 2-position switch on the front, behind the logo, selects 4 Ω or 16 Ω without removing the aluminium grille.

What amplifier should I use?

ECLER recommends an amplifier power of 280 W RMS.

Where can I buy the ECLER NIMBO-26 CR in India?

The ECLER NIMBO-26 CR is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Hotel terrace and pool area

Outdoor music for hospitality spaces.

Connections

Setup

1. Mount each NIMBO-26 on its VEASY bracket.
2. Loop the cables into the grommets from bottom to top.
3. Set the impedance switch to suit the amplifier load.
4. Set the level for the area.

Tip: Use round-profile cables and drill the grommets with a round tool for a clean cable entry.

Workflow 2: Retail façade in brand colours

A loudspeaker painted to match the shop identity.

Connections

Setup

1. Specify the RAL colour of the CR version.
2. Fix the VEASY wall plates at an even height.
3. Aim each loudspeaker with tilt and pan.
4. Repeat the orientation using the bracket markings.

Tip: The black grille and bracket of the CR version frame any enclosure colour.

Workflow 3: Corporate lobby

Background music and announcements in a designed interior.

Connections

Setup

1. Place the loudspeakers where nothing blocks the line to the listeners.
2. Choose 4 Ω or 16 Ω according to how many loudspeakers share the channel.
3. Wire with respect to polarity.
4. Import the ECLER EQ settings in EclerNet Manager.

Tip: The wide 210° x 228° dispersion covers a large area from each loudspeaker.

Workflow 4: Restaurant garden

Even sound over outdoor seating.

Connections

Setup

1. Mount the loudspeakers high enough for better long-distance coverage.
2. Angle them down towards the tables.
3. Loop the cables for outdoor installation.
4. Balance the level between zones.

Tip: The IP44 rating protects the loudspeaker from splashing water.

Workflow 5: Sports and wellness centre

Music for training areas and outdoor courts.

Connections

Setup

1. Fix the brackets to a solid structure.
2. Use cables of 2.5 mm² or more.
3. Keep the amplifier at the recommended 280 W RMS.
4. Raise the level gradually.

Tip: Cross-section in mm² = length in m divided by the loudspeaker impedance in Ω (4 % losses).

Workflow 6: Education campus

Announcements and music across courtyards and halls.

Connections

Setup

1. Plan positions with a clear line of sight to the listeners.
2. Set the impedance switch for the line.
3. Mount and orient each unit.
4. Test speech intelligibility.

Tip: High frequencies are much more directional than low ones: avoid obstacles in front of the loudspeaker.