ECLER VEO-XWT44E
PRICE ON ENQUIRY
ECLER VEO-XWT44E HDBaseT wall plate transmitter: 2 x HDMI + USB-C, 4K 60 Hz HDR, auto switching, display on/off, 40 m. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please DM us or call +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our trusted payment gateway partner.
Video
| Inputs | 2 x HDMI Type A female (18 Gbps), 1 x USB Type C |
| Resolutions | Up to 4K 60 Hz 4:4:4 8‑bit HDR10 (HDMI); 4K 30 Hz 4:4:4 (USB‑C) |
| Colour space | YUV |
| HDCP | 2.2 |
| HDR | HDR10 |
| Scaling | No |
| HDMI distance | Up to 10 m with ECLER VEO cables |
Audio
| Formats | PCM and multichannel compressed formats |
| Sample rate | 32, 44.1, 48, 88.2, 96, 176.4, 192 kHz |
| Bit depth | Up to 24‑bit |
| Frequency response | 20 Hz - 20 kHz, ±3 dB |
| Max output level | 2.0 Vrms ±0.5 dB |
| SNR | > 85 dB (20 Hz - 20 kHz) |
Control and link
| Control connectors | 2‑pin Euroblock (IR), 3‑pin Euroblock (RS‑232), USB‑C (firmware) |
| Control protocols | IR, RS‑232, CEC |
| Buttons | Reset, DISPLAY ON/OFF, SOURCE / AUTO |
| IR | Built‑in IR sensor |
| EDID | Pass‑through and smart management |
| Status indicators | Link, HDCP, power, HDMI IN 1/2 and USB‑C LEDs |
| Cat 5e / 6 | 4K up to 35 m; 1080p up to 60 m |
| Cat 6a / 7 | 4K up to 40 m; 1080p up to 70 m |
Electrical and physical
| Power supply | Bidirectional over HDBaseT; 100‑240 V AC 50/60 Hz to 24 V DC 1.25 A |
| DC connector | 2‑pin Euroblock |
| Power consumption | 22 W maximum |
| Operating | -10 °C to 55 °C, 10 - 90 % RH |
| Installation | Wall |
| Dimensions (W x H x D) | 146 x 86 x 42 mm |
| Weight | 0.294 kg |
| Shipping dimensions (W x H x D) | 183 x 105 x 133 mm |
| Shipping weight | 0.8 kg |
| Material / colour | Plastic, white |
Product overview
The ECLER VEO-XWT44E is an HDBaseT wall plate transmitter in European 2-gang format with two HDMI inputs and a USB-C input: with the VEO-XRT44 receiver it extends 4K up to 40 m, or Full HD up to 70 m, over a single Cat cable.
It supports real 4K 60 Hz 4:4:4 YUV video with HDR10 and up to 18 Gbps. The inputs are selected with the front SOURCE / AUTO button, by automatic switching or over RS-232, and IR and bidirectional RS-232 travel with the video. A second button switches a display on and off via CEC, or sends commands programmed by IR learning or RS-232. Bidirectional power over the link lets the wall plate be powered by the receiver and vice versa.
| HDMI and USB‑C inputs | 2 + 1 |
| 4K with the VEO‑XRT44 | 40 m |
| 1080p over Cat 6a/7 | 70 m |
| Source switching | Auto |
Key features
- 2 x HDMI and 1 x USB-C inputs on a 2-gang EU wall plate
- 4K 60 Hz 4:4:4 HDR via HDMI, 4K 30 Hz 4:4:4 via USB-C
- HDCP 2.2; 18 Gbps
- Video source auto-switching
- 4K up to 40 m and 1080p up to 70 m over a Cat cable
- DISPLAY ON/OFF button: CEC and RS-232 commands, or IR learning
- RS-232, IR and CEC pass-through
- EDID pass-through and smart management
- Bidirectional power over the HDBaseT link
- Status LEDs; firmware upgrade over USB-C; ESD protection
Presentation at the wall
Guests connect a laptop or player to HDMI IN 1, HDMI IN 2 or USB-C. In auto mode the plate takes the first active input (HDMI IN 1, then HDMI IN 2, then USB-C) and switches to a newly connected source; the last configuration is kept after a power loss.
Display on and off from the wall
The blue-backlit DISPLAY ON/OFF button sends CEC and RS-232 on and off commands, and can be programmed by IR learning or RS-232; RS-232 commands also cover volume and mute.
Simple wiring
Behind the plate: HDBT OUT (12 - 48 V) to the receiver, DC IN for the 24 V adapter, DC OUT to power a compatible device, IR IN and RS-232 terminal blocks. RS-232 runs at 9600 baud, 8 data bits, 1 stop bit, no parity.
In the box
- 1 x VEO-XWT44E transmitter / switcher
- 1 x surface mount box EU
- 2 x mounting screws
- 1 x 3-pin Euroblock
- 3 x 2-pin Euroblock
- 1 x power adapter (24 V DC 1.25 A) with international blades
- 1 x quick guide and warranty
Available versions
- VEO-XWT44E (white): reference CVEOXWT44E
ECLER VEO-XWT44E: frequently asked questions
Which receiver does it need?
The VEO-XRT44 HDBaseT receiver.
Can it switch sources automatically?
Yes: hold SOURCE / AUTO for three seconds to enter or leave auto switching.
Can it turn the display on?
Yes, with the DISPLAY ON/OFF button via CEC and RS-232 commands (programming required) or IR learning.
How is it mounted?
In a European 2-gang wall box, or on the included EU surface mount box.
Where can I buy the ECLER VEO-XWT44E in India?
The ECLER VEO-XWT44E is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Meeting room wall input
Guests present from laptops at the table wall.
Connections
| Connect | To |
|---|---|
| Laptop HDMI or USB‑C | VEO‑XWT44E inputs |
| VEO‑XWT44E HDBT OUT | VEO‑XRT44 HDBT IN |
| VEO‑XRT44 HDMI OUT | Display |
Setup
- Mount the plate in a 2-gang EU box.
- Run Cat 6a/7 to the receiver.
- Power the link from either end.
- Hold SOURCE / AUTO for auto switching.
Tip: Auto mode picks the newest active source.
Workflow 2: Display power from the wall
Users switch the screen on with one button.
Connections
| Connect | To |
|---|---|
| VEO‑XWT44E | Display via CEC or RS‑232 through the receiver |
Setup
- Program the DISPLAY ON/OFF commands.
- Test the on command (button lights blue).
- Test the off command.
- Label the buttons.
Tip: IR learning is an alternative to RS-232 programming.
Workflow 3: Classroom lectern
Two fixed sources and a USB-C laptop input.
Connections
| Connect | To |
|---|---|
| Document camera | HDMI IN 1 |
| PC | HDMI IN 2 |
| Teacher laptop | USB‑C |
Setup
- Connect the fixed sources to the HDMI inputs.
- Leave USB-C for visitors.
- Select sources with SOURCE / AUTO.
- Check the input LEDs.
Tip: An input LED turns green when its source is selected.
Workflow 4: Control system integration
A room controller handles switching.
Connections
| Connect | To |
|---|---|
| Control system RS‑232 | VEO‑XWT44E RS‑232 |
Setup
- Set 9600 baud, 8 data bits, 1 stop bit, no parity.
- Send source and display commands.
- Lock the panel buttons if needed.
- Test all commands.
Tip: Commands cover sources, auto switching, HDCP, EDID, display and volume.
Workflow 5: Hotel function room
A wall plate in a banqueting room feeding a projector.
Connections
| Connect | To |
|---|---|
| VEO‑XWT44E | VEO‑XRT44 at the projector |
Setup
- Use the surface box where there is no in-wall box.
- Connect the receiver to the projector.
- Power from the projector end.
- Test HDMI and USB-C.
Tip: Bidirectional power avoids a socket at one end.
Workflow 6: Restaurant screen
Staff choose between two players.
Connections
| Connect | To |
|---|---|
| Player 1 | HDMI IN 1 |
| Player 2 | HDMI IN 2 |
Setup
- Connect both players.
- Set manual or auto switching.
- Train staff on SOURCE / AUTO.
- Check the link LED.
Tip: The last configuration is kept after a power loss.
