ELECTRO-VOICE EVID S10.1D

Product overview

The ELECTRO-VOICE EVID S10.1D is a compact dual 10-inch surface-mount subwoofer from the EVID-S series, built to bring the low end to patios, rooftops and retail floors, indoors or out: 400 W continuous (1,600 W peak), IP54 out of the box and IP65 with the included port covers.

Dual 10-inch woofers share one weather-resistant polypropylene cabinet. A rear-panel switch selects stereo (2 x 8 Ω) or mono (4 Ω) operation, and two 4-pin detachable Euroblock connectors carry the input and an output to satellite speakers. Four M10 fly points, one M10 safety point and an optional U-bracket make it easy to mount; an optional 70 V / 100 V transformer input panel is available.

Key features

• Dual 10-inch woofers: 400 W continuous, 1,600 W peak power handling
• IP54 rated, upgradable to IP65 with the included port covers
• Rear-panel switch for stereo (2 x 8 Ω) or mono (4 Ω) operation
• Two 4-pin detachable Euroblock connectors: input and output to satellites
• Four M10 fly points and one M10 safety point; optional U-bracket
• Black or white polypropylene cabinet; optional 70 V / 100 V transformer input panel

Built for outdoor duty

Every EVID-S model offers true weather-resistant construction, confirmed by testing beyond industry norms, for bars, restaurants, patio areas, retail spaces, hotel lobbies, pool areas, fitness clubs and similar venues.

In the box

• EVID-S10.1D subwoofer
• 2 subwoofer feet
• Weather input cover
• 2 IP-65 port covers

ELECTRO-VOICE EVID S10.1D: frequently asked questions

Can it be installed outdoors?

Yes. It is rated IP54 per IEC 60529 and reaches IP65 with the included port covers.

Can it run in stereo?

Yes. A rear-panel switch selects stereo (2 x 8 Ω) or mono (4 Ω) operation.

Does it work on a 100 V line?

With the optional 70 V / 100 V transformer input panel.

Where can I buy the ELECTRO-VOICE EVID S10.1D in India?

The ELECTRO-VOICE EVID S10.1D is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Patio bar system

Outdoor bars and terraces.

Connections

Setup

1. Place the subwoofer on its feet or fly it.
2. Fit the IP65 port covers outdoors.
3. Wire input and satellite output.
4. Set stereo or mono on the rear switch.

Tip: Port covers raise the rating from IP54 to IP65.

Workflow 2: Retail floor low end

Shops wanting fuller music.

Connections

Setup

1. Choose mono 4 Ω or stereo 2 x 8 Ω.
2. Mount with the optional U-bracket.
3. Set crossover and level in the system DSP.
4. Check coverage across the floor.

Tip: Four M10 fly points allow suspension.

Workflow 3: Rooftop venue

Rooftop lounges.

Connections

Setup

1. Fly from the M10 points.
2. Attach a safety to the M10 safety point.
3. Fit the weather input cover.
4. Set levels.

Tip: The polypropylene cabinet is built for sun, salt and moisture.

Workflow 4: 100 V distributed system

Venues on a constant-voltage line.

Connections

Setup

1. Fit the optional transformer input panel.
2. Select the tap.
3. Connect to the line.
4. Balance with the satellites.

Tip: The transformer panel is an optional accessory.

Workflow 5: Pool area

Hotels and leisure venues.

Connections

Setup

1. Mount out of reach.
2. Fit port covers.
3. Wire with up to 12 AWG cable.
4. Set the level for background music.

Tip: Weather-resistant construction suits pool areas.

Workflow 6: Fitness club

Gyms needing energetic bass.

Connections

Setup

1. Place near a wall for loading.
2. Run in stereo.
3. Feed satellites from the output.
4. Tune in the DSP.

Tip: Two Euroblock connectors carry input and satellite output.