FONESTAR MICSET-D32J

Product overview

The FONESTAR MICSET-D32J is a cardioid unidirectional dynamic desktop microphone with a 32 cm gooseneck, LOCK/OFF and PTT push buttons and a 1.5 m with 6.3 mm mono jack connector cable.

FONESTAR designed it for public address and communication applications in professional environments: conferences, presentations and work settings. The high-quality dynamic capsule gives 100 to 15,000 Hz with -55 dB ±3 dB sensitivity, a dynamic range of 78 dB and 110 dB maximum SPL for clear, distortion-free transmission, on a compact 93 x 46 x 122 mm base.

Key features

• Cardioid dynamic capsule for crystal clear voice pick-up
• Great max. SPL: 110 dB
• LOCK/OFF (PTL) and PTT push buttons
• 32 cm gooseneck on a compact desktop base
• 1.5 m with 6.3 mm mono jack connector, unbalanced line
• Low noise: 32 dB equivalent noise, THD under 1 %

Push buttons

LOCK/OFF (PTL): press to speak and press again to deactivate the microphone. PTT: press and hold to speak; it stays deactivated if not pressed.

Connection

The fixed 1.5 m cable ends in a 6.3 mm mono jack for unbalanced microphone inputs of amplifiers and mixers.

Durability

Its structure withstands intensive use in demanding environments, from -20 °C to 50 °C and up to 90 % relative humidity.

In the box

• MICSET-D32J desktop microphone with 1.5 m with 6.3 mm mono jack connector cable

Available versions

• MICSET-D32J: black

FONESTAR MICSET-D32J: frequently asked questions

Does it need phantom power?

No. The MICSET-D32 models are dynamic microphones; the data sheet lists no power supply.

What do the two buttons do?

LOCK/OFF latches the microphone on until pressed again; PTT keeps it on only while held.

Which connector does it have?

The MICSET-D32J has a 1.5 m with 6.3 mm mono jack connector cable, unbalanced line.

Where can I buy the FONESTAR MICSET-D32J in India?

The FONESTAR MICSET-D32J is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Conference room

Meeting and boardrooms where each speaker has a desktop microphone.

Connections

Setup

1. Place the microphone in front of the speaker and bend the gooseneck towards the mouth.
2. Connect the cable to the mixer input.
3. Set the gain while speaking at a normal level.
4. Use the push button to talk only when needed.

Tip: Keep the room loudspeakers behind the capsule.

Workflow 2: Paging and announcements

Offices, factories and warehouses with a PA amplifier.

Connections

Setup

1. Place the microphone at the reception or control desk.
2. Connect it to the amplifier.
3. Use PTT for short messages.
4. Check the level in the paging zones.

Tip: PTT avoids leaving the microphone open by mistake.

Workflow 3: Reception and help desk

Hotels, hospitals and public offices.

Connections

Setup

1. Fix the base on the counter.
2. Route the cable under the desk.
3. Set the level for a clear voice.
4. Train staff to use the push button.

Tip: The compact 93 x 46 x 122 mm base fits small counters.

Workflow 4: Lectern and training room

Schools, colleges and training centres.

Connections

Setup

1. Place the base on the lectern.
2. Point the capsule at the presenter.
3. Latch the microphone on for a long talk.
4. Switch it off at the end.

Tip: Keep a constant distance to the capsule for an even level.

Workflow 5: Places of worship

Prayer halls and churches with a sound system.

Connections

Setup

1. Set the microphone on the pulpit or desk.
2. Connect it to the mixer.
3. Set the gain and the tone.
4. Mute with the button when not speaking.

Tip: The cardioid pattern helps against feedback from the hall loudspeakers.

Workflow 6: Control rooms and dispatch

Security rooms, stations and transport control desks.

Connections

Setup

1. Place the microphone within reach of the operator.
2. Connect and test the level.
3. Use PTT for messages.
4. Keep the microphone on the desk between shifts.

Tip: Works from -20 °C to 50 °C and up to 90 % relative humidity.