GENELEC S360A
PRICE ON ENQUIRY
GENELEC S360A SAM main studio monitor: 118 dB SPL, compression driver in DCW, 250 W + 100 W Class D, AES/EBU, GLM. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please DM us or call +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our trusted payment gateway partner.
System
| Type | Two‑way Smart Active Monitor (SAM), high SPL main monitor |
| Frequency response | 36 Hz - 22 kHz (-6 dB) ±2 dB from 39 Hz to 19 kHz |
| Maximum short‑term SPL | ≥118 dB (sine wave, 100 Hz‑3 kHz, half space, 1 m) |
| Maximum long‑term SPL | ≥112 dB (IEC weighted noise, 1 m) |
| Maximum peak SPL per pair | ≥128 dB (listening room, music material, 1 m) |
| Self‑generated noise | ≤10 dB SPL (1 m on axis, A‑weighted) |
| Harmonic distortion at 95 dB SPL | 50‑100 Hz <1 %; 100 Hz‑5 kHz <0.5 %; above 5 kHz <1.5 % |
| Dispersion | 95° horizontal, 75° vertical |
| Group delay | 5.2 ms (Extended Phase Linearity off, analogue input) |
| Crossover frequency | 1.4 kHz |
Drivers and enclosure
| Bass | 250 mm (10 in) cone |
| Treble | Compression driver, 44 mm (1.7 in) titanium diaphragm into a 25 mm (1 in) throat, DCW |
| Enclosure | MDF, 32 mm front baffle, down‑firing Laminar Integrated Ports (LIP), Iso‑Plate |
| Dimensions (H x W x D) | 530 x 360 x 360 mm with Iso‑Plate |
| Mounting points | Top/bottom and sides, M10 threads |
Amplifiers and power
| Amplifiers | 250 W bass + 100 W treble, Class D (short term) |
| Amplifier THD | <0.01 % at nominal output |
| Mains | 100‑240 VAC, 50/60 Hz |
| Power consumption | ISS active <1 W · idle 11 W · full output 230 W |
Inputs, outputs and control
| Analogue input | XLR female, balanced 10 kΩ; max +25 dBu; -6 dBu for 100 dB SPL at 1 m; gain 0/+6/+12/+18 dB |
| Digital input / thru | XLR female / XLR male, 110 Ω, AES/EBU single wire, 16‑24 bit, 32‑192 kHz; -30 dBFS for 100 dB SPL |
| Control network | 2 x RJ45 for the GLM network |
| Calibration | GLM AutoCal, GLM manual, stand‑alone; 2 LF + 2 HF shelving filters; subwoofer high‑pass 50‑100 Hz in GLM |
| Stand‑alone controls | Bass roll‑off, bass tilt, treble tilt, desktop 160 Hz, LED disable, ISS, digital A/B, level -10/‑20 dB, stored |
Environment and warranty
| Operating environment | Indoor; 15‑35 °C; 20‑80 % RH, non‑condensing; 50 mm clearance |
| Finish | Black, White |
| Warranty | 2 years parts and labour, 5 years with free registration |
Physical
| Weight | 30 kg (66 lb) |
| In the box | 1 x GENELEC S360A monitor 1 x mains cable (1.8 m) 1 x GLM network cable (5 m) 1 x operating manual |
Product overview
The GENELEC S360A is a high-SPL SAM studio monitor that fuses main monitor performance with a compact size, without compromising predictability, speech intelligibility or sound quality.
In a low diffraction enclosure with premium Finnish woodwork, a 10-inch high-efficiency woofer and a 1.7-inch titanium compression driver in an extended Directivity Control Waveguide deliver 118 dB short-term SPL, with peaks even higher. It suits demanding film, post and music production; with a subwoofer it serves rooms where the listening distance exceeds 10 m.
| Maximum short‑term SPL | 118 dB |
| Frequency response (-6 dB) | 36 Hz - 22 kHz |
| Class D amplifiers | 250 W + 100 W |
| Weight | 30 kg |
Key features
- 250 mm woofer and a 1.7-inch titanium compression driver in an extended DCW waveguide
- 250 W + 100 W Class D amplifiers, crossover at 1.4 kHz
- 118 dB short-term SPL, 128 dB peak per pair
- 95° x 75° dispersion, linear phase above the lowest octaves
- Down-firing LIP ports and Iso-Plate decoupling, M10 mounting points
- Analogue XLR and AES/EBU inputs, GLM network with AutoCal
- Amplifier can be placed remotely in the 2U rack installation kit
Loud and clear
The S360A's well-controlled dispersion keeps the sound neutral on and off axis, so it works in large rooms, midfield and nearfield set-ups. A 32 mm front baffle and bracing minimise panel vibration.
Configure, calibrate and control
GLM calibrates the S360A for the room, from mono to immersive, and doubles as a monitor controller: calibrated listening levels, solo and mute, and switching between formats, systems and listening positions.
Flexible mounting
Free-standing on the Iso-Plate, on stands, walls, ceilings or trusses with tailor-made brackets, or flush mounted. All connectors face down for easy cabling close to a wall.
In the box
- 1 x GENELEC S360A monitor
- 1 x mains cable (1.8 m)
- 1 x GLM network cable (5 m)
- 1 x operating manual
Calibration requires GLM software and the GLM Kit (8300-601) or a 9320A SAM Reference Controller (sold separately). Mounting brackets are sold separately.
GENELEC S360A: frequently asked questions
How loud can the S360A play?
It delivers at least 118 dB short-term SPL at 1 m and 128 dB peak per pair, with very low distortion.
Can it be used in a small room?
Yes. Its controlled dispersion allows midfield and nearfield use; calibrate the listening level in GLM for safe listening.
Is it available in white?
Yes. GENELEC offers the S360A in black and in white.
Where can I buy the GENELEC S360A in India?
The GENELEC S360A is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: High-SPL stereo mixing
Use the S360A as a compact main monitor for music and film mixing at higher levels.
Connections
| Connect | To |
|---|---|
| Monitor controller or interface | ANALOG IN (XLR) |
| Mains | MAINS INPUT, earthed outlet |
Setup
- Place the monitors symmetrically on the S360-415B floor stand or S360-408B stand plate.
- Aim the acoustic axes at the listening position.
- Run GLM AutoCal, or set the tone controls with STORED off.
- Calibrate the listening level in GLM.
Tip: Use the S360A's power for headroom rather than higher average listening levels.
Workflow 2: Calibrating a stereo pair with GLM
Let GLM measure the room and tune each S360A for the listening position.
Connections
| Connect | To |
|---|---|
| Each monitor | GLM NETWORK (RJ45), daisy‑chained |
| GLM adapter | Last monitor's GLM NETWORK port and computer USB |
| Measurement microphone | GLM adapter microphone input |
Setup
- Daisy-chain the monitors with CAT5 (RJ45) cables and connect the last one to the GLM adapter.
- Connect the adapter to the computer by USB and place the microphone at ear height at the listening position, pointing up.
- Install GLM from genelec.com and run the AutoCal measurement.
- Store the settings in the monitors so they work without a computer.
Tip: GLM also works as a full monitor controller: calibrated levels, solo, mute and switching between systems.
Workflow 3: Immersive system
Build a multichannel or immersive room with S360A monitors around the listener.
Connections
| Connect | To |
|---|---|
| Each output channel | ANALOG IN or DIGITAL IN |
| All monitors and subwoofers | GLM network |
Setup
- Mount the monitors with S360-424B or S360-450B brackets on walls, ceiling or truss.
- Point each acoustic axis at the listening position.
- Connect every device on the GLM network.
- Calibrate the whole system with GLM, including level and delay.
Tip: The Iso-Plate is removed before fitting brackets (M6 Allen key) and stored for later use.
Workflow 4: Large room with a subwoofer
Cover listening distances beyond 10 m with a GENELEC 7300 series subwoofer.
Connections
| Connect | To |
|---|---|
| Source | Subwoofer inputs |
| Subwoofer outputs | S360A inputs |
| All devices | GLM network |
Setup
- Connect the monitors and the subwoofer on the GLM network.
- Set the S360A subwoofer high-pass (50-100 Hz) in GLM.
- Run AutoCal so levels, delays and phase are aligned.
- Store the settings.
Tip: GENELEC names the 7380 and 7382 as a good match for the S360A.
Workflow 5: In-wall and screen installation
Flush mount behind a perforated screen or in a wall.
Connections
| Connect | To |
|---|---|
| Monitor | Wall recess on the Iso‑Plate |
| Signal and GLM | Down‑facing connectors |
Setup
- Use the Iso-Plate to decouple the monitor in the recess.
- Ventilate the recess so the air near the amplifier stays below 35 °C.
- Connect cables to the down-facing panel.
- Calibrate with GLM after installation.
Tip: Down-firing LIP ports make the S360A suitable for use behind perforated screens.
Workflow 6: AES/EBU digital feed
Run the monitors straight from a digital console or converter.
Connections
| Connect | To |
|---|---|
| AES/EBU source | DIGITAL IN AES/EBU |
| Next monitor | DIGITAL THRU AES/EBU |
Setup
- Connect AES/EBU to the first monitor.
- Daisy-chain up to four monitors through DIGITAL THRU.
- Select channel A or B with the DIGITAL switches or in GLM.
- The digital input is selected automatically, even when silent.
Tip: -30 dBFS produces 100 dB SPL at 1 m.
