SENNHEISER e 825-S
MRP - Rs. 9,000
SENNHEISER e 825-S: Dynamic microphone. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
The price shown is inclusive of all taxes. Contact / WhatsApp +91 89818 07755 / +91 91477 00677 to check if any offers or additional discounts are available. If available, we will gladly share a coupon code that you can apply at checkout for the best price. All payments are processed securely through Razorpay, our trusted payment gateway partner.
Product Features
| On/off switch | Yes |
Product
| Transducer type | Dynamic |
Frequency Specifications
| Audio frequency response | 80 - 15,000 Hz |
Acoustic Properties
| Pickup pattern | Cardioid |
Connectivity
| Connection | Wired |
| Connectors | 3-pin XLR |
Ambient Conditions
| Operating temperature (C) | 0 °C to 40 °C (14 °F to 131 °F) |
Electrical Properties
| Sensitivity in free field, no load (1kHz) | 1.5 mV/Pa |
| Nominal impedance | 350 Ohm |
| Min. terminating impedance | 1000 Ohm |
Dimensions
| Dimensions | Ø 48 x 180 mm |
| Product weight | 330 g |
| Product diameter | 48 mm |
Product overview
The SENNHEISER e 825-S is a dynamic microphone from SENNHEISER, part of the Evolution 800 range.
The e 825 S is a cardioid general purpose microphone ideal for vocal and instrument miking and club PA.
| Pickup pattern | Cardioid |
| Transducer type | Dynamic |
| Audio frequency response | 80 - 15,000 Hz |
| Sensitivity in free field, no load (1kHz) | 1.5 mV/Pa |
Key features
- Rugged metal body
- Excellent feedback and spillage rejection
- Good suppression of handling noise
- Balanced frequency response
- Warm transparent tonal response
- Silent ON/OFF switch
SENNHEISER e 825-S: frequently asked questions
What is the pickup pattern of the e 825-S?
Cardioid, according to the official specification.
What is the frequency response of the e 825-S?
80 - 15,000 Hz.
Which connector does the e 825-S use?
3-pin XLR.
Where can I buy the SENNHEISER e 825-S in India?
The SENNHEISER e 825-S is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Instrument miking on stage
Live sound engineers.
Connections
| Connect | To |
|---|---|
| e 825-S output (3-pin XLR) | Microphone input of the mixer, interface or recorder |
Setup
- Mount the e 825-S on a stand or clamp close to the source.
- No phantom power is needed for a dynamic microphone; leave it off unless other devices on the line need it.
- Set the gain while the musician plays at full level.
- Angle the microphone so the loudest nearby sources sit in its rejection zone.
Workflow 2: Studio recording
Recording studios and home studios.
Connections
| Connect | To |
|---|---|
| e 825-S output (3-pin XLR) | Microphone input of the mixer, interface or recorder |
Setup
- Place the e 825-S close to the instrument and listen on closed headphones while moving it.
- Set the preamp gain with headroom for the loudest passages.
- Record a short test and adjust the position before the take.
Workflow 3: Rehearsal room
Bands rehearsing with a small PA.
Connections
| Connect | To |
|---|---|
| e 825-S output (3-pin XLR) | Microphone input of the mixer, interface or recorder |
Setup
- Leave the e 825-S on its stand at the instrument between rehearsals.
- Keep cable runs tidy and use balanced microphone cables.
Workflow 4: Recording at home or in the studio
Home studios and project studios.
Connections
| Connect | To |
|---|---|
| e 825-S output | Microphone input of an audio interface |
Setup
- Connect the e 825-S to an audio interface with a balanced microphone cable.
- No phantom power is needed for a dynamic microphone; leave it off unless other devices on the line need it.
- Set the gain so the loudest parts peak well below clipping.
Workflow 5: Podcasts and streaming
Podcasters and content creators.
Connections
| Connect | To |
|---|---|
| e 825-S output | Audio interface or mixer microphone input |
Setup
- Mount the e 825-S on a desk stand or boom arm.
- Speak from a constant distance for an even level.
- Monitor on headphones while recording.
Workflow 6: Live events and rentals
Rental companies and event sound teams.
Setup
- Check the e 825-S and its cable before each event.
- Label microphones and cables per channel for quick changeovers.
- Store the microphone in its pouch or case after use.
