SENNHEISER e 902
MRP - Rs. 20,000
SENNHEISER e 902: Dynamic Bass Instrument Microphone. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
The price shown is inclusive of all taxes. Contact / WhatsApp +91 89818 07755 / +91 91477 00677 to check if any offers or additional discounts are available. If available, we will gladly share a coupon code that you can apply at checkout for the best price. All payments are processed securely through Razorpay, our trusted payment gateway partner.
Product
| Transducer type | Dynamic |
Frequency Specifications
| Audio frequency response | 20 - 18,000 Hz |
Acoustic Properties
| Pickup pattern | Cardioid |
Connectivity
| Connection | Wired |
| Connectors | 3-pin XLR |
Electrical Properties
| Sensitivity in free field, no load (1kHz) | 0.2 mV/Pa |
| Nominal impedance | 350 Ohm |
| Min. terminating impedance | 1000 Ohm |
Dimensions
| Dimensions | 128,5 x 60 mm |
| Product weight | 480 g |
| Product diameter | 60 mm |
Product overview
The SENNHEISER e 902 is a dynamic bass instrument microphone from SENNHEISER, part of the Evolution 900 range.
The Sennheiser e 902 dynamic cardioid microphone captures the full force and character of low-frequency instruments. Whether used on kick drums, bass guitar amps, or tubas, the e 902 delivers a sound that's unmistakably clean and powerful. Born from a shift in Sennheiser's philosophy—moving beyond strict neutrality to embrace musical interpretation—the e 902 was purpose-built to support the sound that players actually want to hear. A deliberate sculpting of the frequency response eliminates muddiness and self-resonances, emphasizing a tight low-end thump and a clearly defined attack.
| Pickup pattern | Cardioid |
| Transducer type | Dynamic |
| Audio frequency response | 20 - 18,000 Hz |
| Sensitivity in free field, no load (1kHz) | 0.2 mV/Pa |
Key features
- Dynamic cardioid microphone tailored for bass frequencies
- Full, clean low-end reproduction with punchy, defined attack
- Frequency response shaped specifically for kick drums and bass instruments
- Very fast transient response for crisp articulation
- Excellent SPL handling for loud sources without distortion
- Built-in hum-compensating coil for noise-free performance
- Shock-mounted capsule to reduce handling noise
- Rugged reinforced metal housing for road-tough durability
- Integral stand mount for easy setup
- Assembled in Europe
SENNHEISER e 902: frequently asked questions
What is the pickup pattern of the e 902?
Cardioid, according to the official specification.
What is the frequency response of the e 902?
20 - 18,000 Hz.
Which connector does the e 902 use?
3-pin XLR.
Where can I buy the SENNHEISER e 902 in India?
The SENNHEISER e 902 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Instrument miking on stage
Live sound engineers.
Connections
| Connect | To |
|---|---|
| e 902 output (3-pin XLR) | Microphone input of the mixer, interface or recorder |
Setup
- Mount the e 902 on a stand or clamp close to the source.
- No phantom power is needed for a dynamic microphone; leave it off unless other devices on the line need it.
- Set the gain while the musician plays at full level.
- Angle the microphone so the loudest nearby sources sit in its rejection zone.
Workflow 2: Studio recording
Recording studios and home studios.
Connections
| Connect | To |
|---|---|
| e 902 output (3-pin XLR) | Microphone input of the mixer, interface or recorder |
Setup
- Place the e 902 close to the instrument and listen on closed headphones while moving it.
- Set the preamp gain with headroom for the loudest passages.
- Record a short test and adjust the position before the take.
Workflow 3: Rehearsal room
Bands rehearsing with a small PA.
Connections
| Connect | To |
|---|---|
| e 902 output (3-pin XLR) | Microphone input of the mixer, interface or recorder |
Setup
- Leave the e 902 on its stand at the instrument between rehearsals.
- Keep cable runs tidy and use balanced microphone cables.
Workflow 4: Recording at home or in the studio
Home studios and project studios.
Connections
| Connect | To |
|---|---|
| e 902 output | Microphone input of an audio interface |
Setup
- Connect the e 902 to an audio interface with a balanced microphone cable.
- No phantom power is needed for a dynamic microphone; leave it off unless other devices on the line need it.
- Set the gain so the loudest parts peak well below clipping.
Workflow 5: Podcasts and streaming
Podcasters and content creators.
Connections
| Connect | To |
|---|---|
| e 902 output | Audio interface or mixer microphone input |
Setup
- Mount the e 902 on a desk stand or boom arm.
- Speak from a constant distance for an even level.
- Monitor on headphones while recording.
Workflow 6: Live events and rentals
Rental companies and event sound teams.
Setup
- Check the e 902 and its cable before each event.
- Label microphones and cables per channel for quick changeovers.
- Store the microphone in its pouch or case after use.
