SENNHEISER e 908 B-ew
MRP - Rs. 20,000
SENNHEISER e 908 B-ew: Wireless Clip-On Condenser Microphone for Saxophone, Trumpet, Trombone and More. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
The price shown is inclusive of all taxes. Contact / WhatsApp +91 89818 07755 / +91 91477 00677 to check if any offers or additional discounts are available. If available, we will gladly share a coupon code that you can apply at checkout for the best price. All payments are processed securely through Razorpay, our trusted payment gateway partner.
Product
| Transducer type | Condenser |
Frequency Specifications
| Audio frequency response | 40 - 20,000 Hz |
Acoustic Properties
| Pickup pattern | Cardioid |
Connectivity
| Connectors | 3.5mm |
Battery & Power
| Phantom power | P12 - P48 V |
Electrical Properties
| Sensitivity in free field, no load (1kHz) | 4.0 mV/Pa |
| Nominal impedance | 100 Ohm |
| Min. terminating impedance | 2000 Ohm |
Dimensions
| Dimensions | Ø 47 x 193 mm |
| Product weight | 75 g |
Product overview
The SENNHEISER e 908 B-ew is a wireless clip-on condenser microphone for saxophone, trumpet, trombone and more from SENNHEISER, part of the Evolution 900 range.
The Sennheiser e 908 B ew is a lightweight, clip-on condenser microphone engineered for saxophonists and brass players who need exceptional sound and total freedom of movement. Designed to integrate seamlessly with Sennheiser Evolution Wireless transmitters, this version of the e 908 provides the clarity and punch you expect from a premium studio mic—with the stage flexibility you need to move naturally.
| Pickup pattern | Cardioid |
| Transducer type | Condenser |
| Audio frequency response | 40 - 20,000 Hz |
| Sensitivity in free field, no load (1kHz) | 4.0 mV/Pa |
Key features
- Tailored for saxophone tone and stage dynamics
- 3.5 mm mini-jack connector for Evolution Wireless transmitters
- Flexible gooseneck with secure bell-mounted clip
- Open, forceful condenser sound with tight transient response
- Shock-mounted capsule to suppress handling noise
- High SPL handling and wide frequency response
- Lightweight, low-profile design for movement-friendly performance
- Rugged enough for the road, refined enough for the studio
- Assembled in Europe
SENNHEISER e 908 B-ew: frequently asked questions
What is the pickup pattern of the e 908 B-ew?
Cardioid, according to the official specification.
What is the frequency response of the e 908 B-ew?
40 - 20,000 Hz.
Which connector does the e 908 B-ew use?
3.5mm.
Where can I buy the SENNHEISER e 908 B-ew in India?
The SENNHEISER e 908 B-ew is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Instrument miking on stage
Live sound engineers.
Connections
| Connect | To |
|---|---|
| e 908 B-ew output (3.5mm) | Microphone input of the mixer, interface or recorder |
Setup
- Mount the e 908 B-ew on a stand or clamp close to the source.
- Switch on phantom power on that input if the official specification for the e 908 B-ew calls for it.
- Set the gain while the musician plays at full level.
- Angle the microphone so the loudest nearby sources sit in its rejection zone.
Workflow 2: Studio recording
Recording studios and home studios.
Connections
| Connect | To |
|---|---|
| e 908 B-ew output (3.5mm) | Microphone input of the mixer, interface or recorder |
Setup
- Place the e 908 B-ew close to the instrument and listen on closed headphones while moving it.
- Set the preamp gain with headroom for the loudest passages.
- Record a short test and adjust the position before the take.
Workflow 3: Rehearsal room
Bands rehearsing with a small PA.
Connections
| Connect | To |
|---|---|
| e 908 B-ew output (3.5mm) | Microphone input of the mixer, interface or recorder |
Setup
- Leave the e 908 B-ew on its stand at the instrument between rehearsals.
- Keep cable runs tidy and use balanced microphone cables.
Workflow 4: Recording at home or in the studio
Home studios and project studios.
Connections
| Connect | To |
|---|---|
| e 908 B-ew output | Microphone input of an audio interface |
Setup
- Connect the e 908 B-ew to an audio interface with a balanced microphone cable.
- Switch on phantom power on that input if the official specification for the e 908 B-ew calls for it.
- Set the gain so the loudest parts peak well below clipping.
Workflow 5: Podcasts and streaming
Podcasters and content creators.
Connections
| Connect | To |
|---|---|
| e 908 B-ew output | Audio interface or mixer microphone input |
Setup
- Mount the e 908 B-ew on a desk stand or boom arm.
- Speak from a constant distance for an even level.
- Monitor on headphones while recording.
Workflow 6: Live events and rentals
Rental companies and event sound teams.
Setup
- Check the e 908 B-ew and its cable before each event.
- Label microphones and cables per channel for quick changeovers.
- Store the microphone in its pouch or case after use.
