SENNHEISER e 935
MRP - Rs. 20,000
SENNHEISER e 935: Dynamic Cardioid Vocal Microphone. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
The price shown is inclusive of all taxes. Contact / WhatsApp +91 89818 07755 / +91 91477 00677 to check if any offers or additional discounts are available. If available, we will gladly share a coupon code that you can apply at checkout for the best price. All payments are processed securely through Razorpay, our trusted payment gateway partner.
Product
| Transducer type | Dynamic |
Frequency Specifications
| Audio frequency response | 40 - 18,000 Hz |
Acoustic Properties
| Pickup pattern | Cardioid |
Connectivity
| Connection | Wired |
| Connectors | 3-pin XLR |
Electrical Properties
| Sensitivity in free field, no load (1kHz) | 2.8 mV/Pa |
| Nominal impedance | 350 Ohm |
| Min. terminating impedance | 1000 Ohm |
Dimensions
| Dimensions | 47 x 151 mm |
| Product weight | 355 g |
| Product diameter | 47 mm |
Product overview
The SENNHEISER e 935 is a dynamic cardioid vocal microphone from SENNHEISER, part of the Evolution 900 range.
The Sennheiser e 935 is a dynamic cardioid vocal microphone crafted for singers who demand consistent clarity, presence, and natural tone in any live environment. Built to deliver transparent highs, warm lower mids, and a focused vocal character, the e 935 gives your voice the power to rise above dense mixes—from rock stages to worship platforms and acoustic venues.
| Pickup pattern | Cardioid |
| Transducer type | Dynamic |
| Audio frequency response | 40 - 18,000 Hz |
| Sensitivity in free field, no load (1kHz) | 2.8 mV/Pa |
Key features
- Dynamic cardioid design for natural, clear vocal reproduction
- Transparent high-end and warm, defined lower mids
- High feedback rejection for superior stage control
- Hum compensating coil for consistent clarity
- Sealed air chamber stabilizes the capsule for reduced handling noise
- Rugged metal construction built for life on the road
- Assembled in Europe
SENNHEISER e 935: frequently asked questions
What is the pickup pattern of the e 935?
Cardioid, according to the official specification.
What is the frequency response of the e 935?
40 - 18,000 Hz.
Which connector does the e 935 use?
3-pin XLR.
Where can I buy the SENNHEISER e 935 in India?
The SENNHEISER e 935 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Lead vocals on stage
Singers and front-of-house engineers at concerts and events.
Connections
| Connect | To |
|---|---|
| e 935 output (3-pin XLR) | Microphone input of the mixer, interface or recorder |
Setup
- Mount the e 935 on a stand with its clip, at mouth height.
- No phantom power is needed for a dynamic microphone; leave it off unless other devices on the line need it.
- Set the input gain while the singer performs at full level.
- Place stage monitors in the null of the cardioid pickup pattern to keep feedback down.
Workflow 2: Backing vocals
Bands with several singers sharing one stage.
Connections
| Connect | To |
|---|---|
| e 935 output (3-pin XLR) | Microphone input of the mixer, interface or recorder |
Setup
- Give each backing singer their own e 935.
- Keep a similar distance to the microphone for every singer so the levels stay even.
- Use a high-pass filter on the mixer channel to clean up stage rumble.
Workflow 3: Speech and presentations
Conference halls, schools, places of worship and events.
Connections
| Connect | To |
|---|---|
| e 935 output (3-pin XLR) | Microphone input of the mixer, interface or recorder |
Setup
- Hand the e 935 to the presenter or mount it on a stand at the lectern.
- No phantom power is needed for a dynamic microphone; leave it off unless other devices on the line need it.
- Set the gain for a normal speaking voice a hand's width from the microphone.
Workflow 4: Recording at home or in the studio
Home studios and project studios.
Connections
| Connect | To |
|---|---|
| e 935 output | Microphone input of an audio interface |
Setup
- Connect the e 935 to an audio interface with a balanced microphone cable.
- No phantom power is needed for a dynamic microphone; leave it off unless other devices on the line need it.
- Set the gain so the loudest parts peak well below clipping.
Workflow 5: Podcasts and streaming
Podcasters and content creators.
Connections
| Connect | To |
|---|---|
| e 935 output | Audio interface or mixer microphone input |
Setup
- Mount the e 935 on a desk stand or boom arm.
- Speak from a constant distance for an even level.
- Monitor on headphones while recording.
Workflow 6: Live events and rentals
Rental companies and event sound teams.
Setup
- Check the e 935 and its cable before each event.
- Label microphones and cables per channel for quick changeovers.
- Store the microphone in its pouch or case after use.
