SENNHEISER MD 441-U
MRP - Rs. 94,300
SENNHEISER MD 441-U: Dynamic Microphone. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
The price shown is inclusive of all taxes. Contact / WhatsApp +91 89818 07755 / +91 91477 00677 to check if any offers or additional discounts are available. If available, we will gladly share a coupon code that you can apply at checkout for the best price. All payments are processed securely through Razorpay, our trusted payment gateway partner.
Product Features
| On/off switch | No |
Product
| Transducer type | Dynamic |
Frequency Specifications
| Audio frequency response | 30 - 20,000 Hz |
Acoustic Properties
| Pickup pattern | Supercardioid |
Connectivity
| Connection | Wired |
| Connectors | 3-pin XLR |
Electrical Properties
| Sensitivity in free field, no load (1kHz) | 1,8 mV/Pa |
| Nominal impedance | 200 Ω |
| Min. terminating impedance | 1000 Ω |
Dimensions
| Dimensions | 270 x 33 x 36 mm |
| Product weight | 421 g |
Product overview
The SENNHEISER MD 441-U is a dynamic microphone from SENNHEISER, part of the Md Series range.
The MD 441 is acknowledged as the most accurate and versatile dynamic mic available. It has a nearly textbook perfect super-cardioid pattern, a five-position low frequency contour switch, a two-position high frequency switch, a critically damped internal shock suspension, and a hum bucking coil. Perfect for vocals and virtually every instrument.
| Pickup pattern | Supercardioid |
| Transducer type | Dynamic |
| Audio frequency response | 30 - 20,000 Hz |
| Sensitivity in free field, no load (1kHz) | 1,8 mV/Pa |
Key features
- Excellent feedback rejection
- Excellent sound quality
- Spring capsule mounting provides low sensitivity to handling noise
- Hum compensating coil
- Five position bass roll-off switch
- Brilliance (treble boost) switch
- Integral pop filter
SENNHEISER MD 441-U: frequently asked questions
What is the pickup pattern of the MD 441-U?
Supercardioid, according to the official specification.
What is the frequency response of the MD 441-U?
30 - 20,000 Hz.
Which connector does the MD 441-U use?
3-pin XLR.
Where can I buy the SENNHEISER MD 441-U in India?
The SENNHEISER MD 441-U is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Instrument miking on stage
Live sound engineers.
Connections
| Connect | To |
|---|---|
| MD 441-U output (3-pin XLR) | Microphone input of the mixer, interface or recorder |
Setup
- Mount the MD 441-U on a stand or clamp close to the source.
- No phantom power is needed for a dynamic microphone; leave it off unless other devices on the line need it.
- Set the gain while the musician plays at full level.
- Angle the microphone so the loudest nearby sources sit in its rejection zone.
Workflow 2: Studio recording
Recording studios and home studios.
Connections
| Connect | To |
|---|---|
| MD 441-U output (3-pin XLR) | Microphone input of the mixer, interface or recorder |
Setup
- Place the MD 441-U close to the instrument and listen on closed headphones while moving it.
- Set the preamp gain with headroom for the loudest passages.
- Record a short test and adjust the position before the take.
Workflow 3: Rehearsal room
Bands rehearsing with a small PA.
Connections
| Connect | To |
|---|---|
| MD 441-U output (3-pin XLR) | Microphone input of the mixer, interface or recorder |
Setup
- Leave the MD 441-U on its stand at the instrument between rehearsals.
- Keep cable runs tidy and use balanced microphone cables.
Workflow 4: Recording at home or in the studio
Home studios and project studios.
Connections
| Connect | To |
|---|---|
| MD 441-U output | Microphone input of an audio interface |
Setup
- Connect the MD 441-U to an audio interface with a balanced microphone cable.
- No phantom power is needed for a dynamic microphone; leave it off unless other devices on the line need it.
- Set the gain so the loudest parts peak well below clipping.
Workflow 5: Podcasts and streaming
Podcasters and content creators.
Connections
| Connect | To |
|---|---|
| MD 441-U output | Audio interface or mixer microphone input |
Setup
- Mount the MD 441-U on a desk stand or boom arm.
- Speak from a constant distance for an even level.
- Monitor on headphones while recording.
Workflow 6: Live events and rentals
Rental companies and event sound teams.
Setup
- Check the MD 441-U and its cable before each event.
- Label microphones and cables per channel for quick changeovers.
- Store the microphone in its pouch or case after use.
