SENNHEISER MD 46

Product overview

The SENNHEISER MD 46 is a dynamic microphone from SENNHEISER, part of the Md Series range.

Omni microphones tend to pick up everything equally, including background noise. The MD 46 cardioid interview mic focuses on the subject, increasing clarity while reducing background noise. Designed to deliver low handling and wind noise, and to eliminate vocal popping, this microphone gives the ENG team an ideal interview tool.

Key features

• Double layer grille basket
• Cardioid dynamic capsule
• Low handling noise
• Long handle with excellent balance

SENNHEISER MD 46: frequently asked questions

What is the pickup pattern of the MD 46?

Cardioid, according to the official specification.

What is the frequency response of the MD 46?

40 - 18,000 Hz.

Which connector does the MD 46 use?

3-pin XLR.

Where can I buy the SENNHEISER MD 46 in India?

The SENNHEISER MD 46 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Instrument miking on stage

Live sound engineers.

Connections

Setup

1. Mount the MD 46 on a stand or clamp close to the source.
2. No phantom power is needed for a dynamic microphone; leave it off unless other devices on the line need it.
3. Set the gain while the musician plays at full level.
4. Angle the microphone so the loudest nearby sources sit in its rejection zone.

Workflow 2: Studio recording

Recording studios and home studios.

Connections

Setup

1. Place the MD 46 close to the instrument and listen on closed headphones while moving it.
2. Set the preamp gain with headroom for the loudest passages.
3. Record a short test and adjust the position before the take.

Workflow 3: Rehearsal room

Bands rehearsing with a small PA.

Connections

Setup

1. Leave the MD 46 on its stand at the instrument between rehearsals.
2. Keep cable runs tidy and use balanced microphone cables.

Workflow 4: Recording at home or in the studio

Home studios and project studios.

Connections

Setup

1. Connect the MD 46 to an audio interface with a balanced microphone cable.
2. No phantom power is needed for a dynamic microphone; leave it off unless other devices on the line need it.
3. Set the gain so the loudest parts peak well below clipping.

Workflow 5: Podcasts and streaming

Podcasters and content creators.

Connections

Setup

1. Mount the MD 46 on a desk stand or boom arm.
2. Speak from a constant distance for an even level.
3. Monitor on headphones while recording.

Workflow 6: Live events and rentals

Rental companies and event sound teams.

Setup

1. Check the MD 46 and its cable before each event.
2. Label microphones and cables per channel for quick changeovers.
3. Store the microphone in its pouch or case after use.