TASCAM CD-A580 v2
MRP - Rs. 92,950
TASCAM CD-A580 v2 3U rack cassette recorder, CD player and USB MP3 recorder/player with dubbing, ±10% pitch, timer start and remote. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
The price shown is the MAXIMUM RETAIL PRICE (MRP), inclusive of all taxes. For the best price, exclusive offers and discounted rates, delivery timelines, or any other information, please DM us or call +91 89818 07755 / +91 91477 00677. We will gladly share an exclusive coupon code that you can apply at checkout. All payments are processed securely through Razorpay, our trusted payment gateway partner.
General
| Type | Cassette recorder, CD player and USB flash drive recorder / player, 3U rack mount |
| Transport | One‑way IC logic transport control |
| Remote control | TASCAM RC‑1329 wireless remote (included) |
CD player
| Compatible discs | CD / CD‑R / CD‑RW (12 cm / 8 cm) |
| Disc formats | Audio CD: CD‑DA Data CD: ISO 9660 Level 1/2 |
| CD‑DA | 44.1 kHz, 16‑bit, 2 channels |
| MP3 | 16 to 48 kHz, 8 to 320 kbps; stereo, joint stereo, dual channel, mono |
| Frequency response | 20 Hz to 20 kHz, ±2 dB |
| Total harmonic distortion | 0.02% or less (1 kHz) |
| S/N ratio | 87 dB or more (IHF‑A) |
| Line output (RCA) | +6 dBV (2.0 V) maximum, load 50 kΩ or more |
Cassette deck
| Track system | 4‑track, 2‑channel stereo |
| Heads | Record/playback x 1, erase x 1 |
| Tape | C‑10 to C‑90 cassette |
| Tape speed | 4.76 cm/s |
| Motor | DC servo motor x 1 |
| Pitch control | ±10% (playback only) |
| Wow and flutter | 0.25% (W. RMS) |
| Frequency response (overall) | 50 Hz to 12.5 kHz ±4 dB (chrome and normal) |
| S/N ratio (overall) | 59 dB (maximum recording level input, A‑weighted) |
| Rewinding time | About 120 s (C‑60) |
| Line input (RCA) | -4.5 dBu (0.46 V) nominal, input impedance 50 kΩ or more |
| Line output (RCA) | -4.5 dBu (0.46 V) nominal, load 50 kΩ or more |
Supported cassette tapes
| Normal (Type I) | |
|---|---|
| Playback | Yes |
| Recording | Yes |
| Chrome (Type II) | |
| Playback | Yes |
| Recording | Yes |
| Metal (Type IV) | |
| Playback | Yes |
| Recording | - |
USB
| Interface | USB 2.0 Full Speed (12 Mbps), USB A port |
| File system | FAT16, FAT32 |
| Playback | MP3, 16 to 48 kHz, 8 to 320 kbps 20 Hz to 20 kHz (±2 dB), S/N 85 dB or more |
| Recording | MP3, 44.1 kHz, 128 kbps, S/N 85 dB or more |
| Recording response | CD to USB: 20 Hz to 15 kHz (±3 dB) LINE to USB: 100 Hz to 15 kHz (±3 dB) |
| Line input (RCA) | -10 dBV (0.316 V) nominal, input impedance 50 kΩ or more |
| Maximum recording time | 240 minutes continuous |
| Files and folders | Up to 999 files, 255 folders, 8 folder levels |
Headphones
| Connector | Standard stereo jack |
| Rated output | 10 mW + 10 mW (CD monitoring, THD+N 0.1%, 32 Ω) |
Physical
| Power | AC 230 V, 50 Hz (model for Europe) AC 120 V, 60 Hz (model for USA / Canada) |
| Power consumption | 13 W |
| Dimensions (W x H x D) | 48.3 x 13.85 x 29.0 cm (483 x 138.5 x 290 mm), including protrusions |
| Weight (net) | 6.0 kg |
| Operating temperature | +5 to +35 °C |
Product overview
The TASCAM CD-A580 v2 combines a cassette recorder, a CD player and a USB flash drive recorder / player in one rack-mountable unit, a multi-format problem solver for installation and professional applications.
It plays the most popular media and moves audio between them: cassettes, CDs and line sources can be recorded to a USB flash drive as MP3 files for archiving, and CDs, USB files or line sources can be recorded to cassette. A one-way IC logic transport chosen for years of professional use, ±10% pitch control, repeat, shuffle and programmed playback, power-on playback and recording with an external timer, a headphone output and the included wireless remote make it a dependable unit for shops, classrooms, conference rooms and archives. The v2 is marked “V2” on the front panel, has a USB 2.0 Full Speed port and saves recordings in RIP and REC folders.
| Cassette, CD and USB | 3 in 1 |
| USB recording, 128 kbps | MP3 |
| Cassette pitch control | ±10% |
| Rack‑mount size | 3U |
Key features
- Cassette recorder, CD player and USB flash drive recorder / player in one 3U rack unit
- One-way IC logic transport control for stable recording and playback
- Cassette playback of Normal (Type I), Chrome (Type II) and Metal (Type IV) tapes; recording on Type I and II
- ±10% pitch control for cassette playback
- Plays audio CDs, CD-R, CD-RW and data CDs with MP3 files
- MP3 recording to USB from CD, cassette or the line inputs; each CD track becomes its own file
- Dub to cassette from CD, USB or line input, also in programmed order
- Repeat, shuffle and programmed playback of up to 30 tracks or files
- Power-on playback and recording with a commercially available timer
- Headphone jack with level control and LCD with level meters
- Wireless remote control (TASCAM RC-1329) included
Archive cassettes and CDs to USB
Cassette masters can be captured to a USB flash drive as MP3 files, so analogue recordings are saved and archived in digital form. CDs and the LINE inputs can be recorded too. From a CD each track is saved as its own MP3 file automatically; from tape or line you can divide the file manually while recording. On the CD-A580 v2, CD recordings go into a RIP folder (TRK1.MP3, TRK2.MP3 …) and tape or line recordings into a REC folder (REC001.MP3 …).
Make cassettes from CD, USB or line
CDs can be recorded to blank cassette media, and the track order can be programmed before recording. The same applies to MP3 files on a USB flash drive, and recording from the line inputs is supported too. The REC LEVEL knob sets the level for each source, and CD or USB playback starts and stops together with the recording.
Three players in one
The installation-grade CD player supports audio CDs, CD-R, CD-RW and data CDs with MP3 files. The USB port plays MP3 files from folders on a FAT16 or FAT32 flash drive, with up to 8 folder levels. Repeat 1, repeat all, repeat folder, shuffle and programmed playback work on CD and USB, and the display shows file names, titles, artists and albums. The cassette deck plays all three common tape types with automatic tape type detection.
Built for installation
The CD-A580 v2 fits a standard rack in 3U. Power-on start switches select the source and the mode, so playback of CD, tape or USB, or recording from the line input to tape, can start under the control of an external timer. The RC-1329 wireless remote has separate key groups for CD, USB and tape.
In the box
- TASCAM CD-A580 v2 cassette recorder / CD player / USB recorder
- Remote control (TASCAM RC-1329)
- AAA batteries for the remote control (x 2)
- Rack-mount screw kit
- Owner's Manual (including warranty)
- TASCAM ID registration guide
USB flash drive, cassettes and audio cables are not included.
TASCAM CD-A580 v2: frequently asked questions
Can I convert cassettes to MP3?
Yes. Select TAPE as the source and record to a USB flash drive as MP3 files (44.1 kHz, 128 kbps), dividing files manually during recording if you wish.
Which cassette tapes does it support?
It plays Normal (Type I), Chrome (Type II) and Metal (Type IV) tapes and records on Normal and Chrome tapes. The recommended tape length is 10 to 90 minutes.
How do I recognise the v2 model?
The CD-A580 v2 has “V2” printed at the bottom right of the front panel. It has a USB 2.0 Full Speed port and saves CD recordings in a RIP folder and tape or line recordings in a REC folder.
Can it play automatically when switched on?
Yes. With the POWER ON START switches set, CD, tape or USB playback starts when power is applied, for example from a programmable timer, and line-input recording to tape can also be timer-controlled.
Where can I buy the TASCAM CD-A580 v2 in India?
The TASCAM CD-A580 v2 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Archiving cassettes to MP3
Save analogue tape recordings as digital files on a USB flash drive.
Connections
| Connect | To |
|---|---|
| USB flash drive | USB port (front) |
| Headphones | PHONES jack |
Setup
- Insert the cassette, connect the USB flash drive and select TAPE with SOURCE.
- Press RECORD USB for standby, play the tape and set REC LEVEL so OVER never lights.
- Rewind, then press RECORD USB again: the tape starts and recording begins.
- Press RECORD USB at each new item to divide the file; recording stops when the tape stops.
Tip: Pitch control can be used while recording from tape to USB.
Workflow 2: Ripping CDs to USB
Copy CD tracks to a USB flash drive as separate MP3 files.
Connections
| Connect | To |
|---|---|
| USB flash drive | USB port |
| Amplifier (monitoring) | LINE OUTPUT (RCA) |
Setup
- Load the CD, connect the USB flash drive and select CD.
- Stop the disc to record it all, or pause at the track to start from; programmed order also works.
- Press RECORD USB twice: the CD plays and each track becomes its own MP3 file.
- Recording stops automatically at the end of the disc.
Tip: On the v2, CD recordings are saved in a RIP folder as TRK1.MP3, TRK2.MP3 and so on.
Workflow 3: Making cassettes from CD or USB
Produce tapes of music, lessons or messages for distribution.
Connections
| Connect | To |
|---|---|
| Blank Type I or Type II cassette | Cassette compartment |
| USB flash drive (if used) | USB port |
Setup
- Insert the cassette and select CD or USB with SOURCE.
- Program the track order if needed.
- Press RECORD TAPE for standby, set REC LEVEL so the meter does not stay above 0.
- Press RECORD TAPE again: the source plays and recording follows it to the end.
Workflow 4: Background music in a shop or restaurant
Play CD, tape or USB music through the venue's sound system.
Connections
| Connect | To |
|---|---|
| Amplifier or mixer input | LINE OUTPUT (RCA) |
| USB flash drive with MP3 files | USB port |
Setup
- Rack-mount the unit and connect LINE OUTPUT to the amplifier.
- Select USB, CD or TAPE and set REPEAT ALL, REPEAT FOLDER or SHUFFLE.
- Set POWER ON START to PLAY and choose the source with the CD-TAPE-USB switch.
- Music starts whenever the system is switched on.
Tip: Use the RC-1329 remote to change tracks from across the room.
Workflow 5: Timer recording of a radio programme
Record a broadcast or line source to cassette at a set time.
Connections
| Connect | To |
|---|---|
| Tuner or source output | LINE INPUT (RCA) |
| Programmable timer | Mains power of the system |
| Amplifier | LINE OUTPUT |
Setup
- Connect the units to a commercially available programmable timer.
- Tune the source and load a cassette.
- Set POWER ON START to REC (TAPE) and the source switch to TAPE.
- Set the timer: recording starts when power comes on.
Tip: Timer playback works the same way with CD, tape or USB as the source.
Workflow 6: Recording meetings and lessons
Capture a talk from a mixer to USB or cassette in a classroom or conference room.
Connections
| Connect | To |
|---|---|
| Mixer record output | LINE INPUT (RCA) |
| USB flash drive | USB port |
| Headphones | PHONES jack |
Setup
- Select LINE with SOURCE and connect the USB flash drive (or insert a cassette).
- Press RECORD USB (or RECORD TAPE) for standby and set REC LEVEL.
- Press the record button again to start; divide the file between sessions.
- Press stop to end the recording.
Tip: Line recordings on the v2 are saved in a REC folder as REC001.MP3, REC002.MP3 and so on.
