TASCAM DA-3000SD
MRP - Rs. 2,00,050
TASCAM DA-3000SD 2-channel master recorder and AD/DA converter: PCM to 192 kHz, DSD to 5.6 MHz, SD card, TCXO clock. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
The price shown is the MAXIMUM RETAIL PRICE (MRP), inclusive of all taxes. For the best price, exclusive offers and discounted rates, delivery timelines, or any other information, please DM us or call +91 89818 07755 / +91 91477 00677. We will gladly share an exclusive coupon code that you can apply at checkout. All payments are processed securely through Razorpay, our trusted payment gateway partner.
Media and formats
| Recording media | SD (512 MB‑2 GB), SDHC (4‑32 GB), SDXC (64‑512 GB); push‑push ejection |
| Playback media | SD cards, USB flash drives |
| PCM | 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz, 16 / 24‑bit; BWF and WAV |
| DSD | 2.8224 / 5.6448 MHz; DSDIFF (.dff), DSF (.dsf) |
| Channels | 2 mono / 1 stereo |
Analogue inputs and outputs
| Input, balanced | |
|---|---|
| Connector | XLR‑3‑31 |
| Nominal level | +4 dBu (+6 dBu at max +15 dBu) |
| Maximum level | +15 / +18 / +20 / +22 / +24 dBu |
| Impedance | 10 kΩ or higher |
| Input, unbalanced | |
| Connector | RCA pin jacks |
| Nominal level | -10 dBV |
| Maximum level | +6 dBV |
| Impedance | 22 kΩ or higher |
| Output, balanced | |
| Connector | XLR‑3‑32 |
| Nominal level | +4 dBu (+6 dBu at max +15 dBu) |
| Maximum level | +15 / +18 / +20 / +22 / +24 dBu |
| Impedance | 100 Ω or less |
| Output, unbalanced | |
| Connector | RCA pin jacks |
| Nominal level | -10 dBV |
| Maximum level | +6 dBV |
| Impedance | 200 Ω or less |
| Headphones | 6.3 mm (1/4‑inch) stereo jack, 45 mW + 45 mW (32 Ω, 0.1% distortion) |
Digital inputs and outputs
| S/PDIF / CASCADE | RCA in and out, IEC60958‑3; 44.1‑192 kHz (SRC off), 32‑216 kHz (SRC on) |
| AES/EBU | XLR‑3‑31 in, XLR‑3‑32 out, AES3‑2003 / IEC60958‑4; 44.1‑192 kHz (SRC off), 32‑216 kHz (SRC on) |
| SDIF‑3 | BNC x 2 (L, R) in and out, SDIF‑3 / DSD‑raw, clock sync 44.1 kHz |
| Allowable deviation | ±100 ppm (SRC off) |
Word sync and USB
| WORD SYNC IN | BNC, 5 V TTL equivalent, 75 Ω ±10% (termination switch), 44.1‑192 kHz |
| WORD SYNC THRU/OUT | BNC, 5 V TTL equivalent, 75 Ω ±10%, 44.1‑192 kHz, THRU/OUT switch |
| Frequency stability | ±1 ppm or less (Ta = 25 °C) |
| USB PLAY/COPY | USB A‑type, USB 2.0 High Speed, DC 5 V 0.5 A |
| USB REMOTE | USB A‑type, USB 1.1 Full Speed, DC 5 V 0.2 A (USB keyboard) |
Recording performance
| THD+N (1 kHz) | 0.003% or less balanced, 0.005% or less unbalanced |
| S/N, PCM 24‑bit | 113 dB or higher balanced, 111 dB or higher unbalanced |
| S/N, DSD | 106 dB or higher balanced, 104 dB or higher unbalanced |
| Frequency response, PCM | 20 Hz‑20 kHz +0.1/‑0.5 dB (44.1/48 kHz) 20 Hz‑40 kHz +0.1/‑1 dB (88.2/96 kHz) 20 Hz‑80 kHz +0.1/‑6 dB (176.4/192 kHz) |
| Frequency response, DSD | 20 Hz‑50 kHz +0.1/‑3 dB 20 Hz‑100 kHz +0.1/‑12 dB |
| Crosstalk (1 kHz) | 105 dB or higher |
Playback performance
| THD+N (1 kHz) | 0.003% or less balanced, 0.001% or less unbalanced |
| S/N, PCM 24‑bit | 118 dB or higher balanced, 116 dB or higher unbalanced |
| S/N, DSD | 116 dB or higher balanced, 114 dB or higher unbalanced |
| Frequency response, PCM | 20 Hz‑20 kHz ±0.1 dB (44.1/48 kHz) 20 Hz‑40 kHz +0.1/‑0.3 dB (88.2/96 kHz) 20 Hz‑80 kHz +0.1/‑3 dB (176.4/192 kHz) |
| Frequency response, DSD | 20 Hz‑50 kHz +0.1/‑3 dB 20 Hz‑100 kHz +0.1/‑12 dB |
Physical
| Power | AC 220‑240 V, 50‑60 Hz (AC 120 V, 60 Hz for USA / Canada) |
| Power consumption | 24 W |
| Dimensions (W x H x D) | 483 x 45 x 305 mm |
| Weight | 4.1 kg |
| Operating temperature | 0 to 40 °C |
| Remote control | Infrared, TASCAM RC‑10 (included) |
Product overview
The TASCAM DA-3000SD is a 2-channel DSD / PCM master recorder and AD/DA converter in a 1U rack unit, built with premium components for reference-grade recording, mastering and monitoring.
It records stereo or dual-mono PCM at up to 192 kHz / 24-bit and DSD at 2.8 and 5.6 MHz straight to SD card, and in ADDA DIRECT mode it works as a phase-coherent stand-alone AD/DA converter. Balanced XLR and unbalanced RCA analogue I/O, AES/EBU and S/PDIF for PCM, and SDIF-3 / DSD-raw for DSD connect it to any studio. A TCXO clock, word clock in, thru and out, and a cascade function for synchronising several units complete a recorder that fits from the mastering room to a DSD multitrack session.
| PCM recording, 24‑bit | 192 kHz |
| DSD recording | 5.6 MHz |
| TCXO clock accuracy | ±1 ppm |
| Fanless rack unit | 1U |
Key features
- PCM recording up to 192 kHz / 24-bit (BWF) and DSD recording at 2.8 and 5.6 MHz (DSDIFF, DSF)
- ADDA DIRECT mode for use as a stand-alone, phase-coherent AD/DA converter
- Analogue I/O: balanced XLR and unbalanced RCA inputs and outputs
- Digital I/O: AES/EBU and S/PDIF for PCM, SDIF-3 / DSD-raw on BNC for DSD
- Sampling rate converter on the digital inputs (32 kHz to 216 kHz)
- High-precision TCXO (1 ppm or less) with WORD IN and THRU/OUT on BNC
- CASCADE function for sample-accurate sync of several units: eight units record 16 tracks
- SD, SDHC and SDXC cards up to 512 GB; USB flash drive for playback and copying
- Auto file save about every 25 seconds against unexpected power loss
- 24-dot level meters and a 128 x 64-dot OLED display
- USB keyboard port for names and control; RC-10 wireless remote included
- Fanless design for a silent monitoring environment
Masterful audio in PCM and DSD
Choose PCM at 44.1 to 192 kHz with 16 or 24-bit resolution, or DSD at 2.8 or 5.6 MHz, and save the settings to suit the music. Recording straight to SD card makes sessions easy to carry and store. Auto track by level, digital track divisions, time or file size, sync recording, marks, an oscillator and flexible file naming support long and unattended recordings.
High-quality circuitry for AD/DA conversion
An EI core transformer with separate windings for the digital and analogue circuits feeds the audio section. The output stage has a dual-monaural configuration with one D/A converter for each channel, and every stage of the audio circuit is balanced to reduce noise on inputs and outputs. Low-impedance capacitors and low-noise, high-precision resistors were chosen carefully, and the TCXO clock generator provides an accuracy of ±1 ppm.
Mastering, monitoring and conversion
Send the stereo master from your recording software into the DA-3000SD to capture it at a higher resolution than a software bounce alone, or place it after outboard equipment to record its colouration in high definition. In ADDA DIRECT mode it serves as a portable high-definition converter for detailed monitoring from studio to studio, and its word clock output lets it act as a master clock, or it can follow an external clock.
DSD multitrack with cascaded units
The cascade function synchronises the start of recording and playback and the clock of several DA-3000SD units, linked by S/PDIF / CASCADE and, if wanted, word clock. Connect eight units and record up to 16 DSD tracks at a time.
In the box
- TASCAM DA-3000SD master recorder
- Power cord (3P)
- TASCAM RC-10 wireless remote control
- Lithium coin cell battery (CR2025, preinstalled in the remote)
- Rack-mounting screw kit
- Owner's Manual (including warranty)
SD, SDHC and SDXC cards are sold separately.
TASCAM DA-3000SD: frequently asked questions
Which formats does the DA-3000SD record?
PCM as BWF files at 44.1, 48, 88.2, 96, 176.4 or 192 kHz with 16 or 24-bit, and DSD as DSDIFF or DSF files at 2.8224 or 5.6448 MHz, in stereo or dual mono.
Can it be used only as a converter?
Yes. In ADDA DIRECT mode it works as a stand-alone AD/DA converter, with the analogue and digital inputs selected separately.
Can I record more than two tracks?
Yes, by cascading several DA-3000SD units: their recording, playback and clock are synchronised, and eight units record 16 tracks.
Can it sync to a studio clock?
Yes. It can use its internal TCXO, the WORD SYNC IN signal or the selected digital input as the master clock, and pass or generate word clock on WORD SYNC THRU/OUT.
Where can I buy the TASCAM DA-3000SD in India?
The TASCAM DA-3000SD is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Mastering from a computer
Capture the stereo master from your recording software at a higher resolution than a software bounce.
Connections
| Connect | To |
|---|---|
| Computer audio interface digital output | DIGITAL IN [AES/EBU] |
| Monitor controller or amplifier | ANALOG OUTPUTS (BALANCED) |
| Headphones | Headphone jack |
| SD card | SD card slot |
Setup
- Select AES/EBU as the input and set CLOCK MSTR to DIN (or turn the sampling rate converter on).
- Set the file format and sampling rate on the REC FILE page.
- Press RECORD for standby, then PLAY as the master plays out.
- Press STOP to write the file and check it on playback.
Tip: Turn on AUTO TRACK in DD mode to follow the track divisions of a digital source.
Workflow 2: Recording through outboard processors
Print the sound of analogue compressors and equalisers in high definition.
Connections
| Connect | To |
|---|---|
| Mix from the computer (DA conversion) | First DA‑3000SD in ADDA DIRECT mode |
| Outboard compressor and equaliser | Between the first unit's XLR outputs and this unit's XLR inputs |
| Clock generator | WORD SYNC IN |
Setup
- Set the reference level on the GENERAL page to match the outboard equipment.
- Select BALANCED as the input source and set the input level.
- Choose PCM up to 192 kHz or DSD at 5.6 MHz as the file format.
- Record the processed master to SD card.
Workflow 3: Stand-alone AD/DA converter for monitoring
Use the DA-3000SD as a high-definition converter for detailed monitoring in any studio.
Connections
| Connect | To |
|---|---|
| Computer audio interface | DIGITAL IN / OUT [AES/EBU] or [S/PDIF] |
| Analogue source | ANALOG INPUTS (BALANCED) |
| Monitor speakers via a controller | ANALOG OUTPUTS (BALANCED) |
Setup
- Open I/O SETTINGS and set ADDA DIRECT to ON.
- Select the analogue input (BALANCED or UNBALANCED).
- Select the digital input: AES/EBU or SPDIF for PCM, SDIF-3 or DSD-raw for DSD.
- Set the master clock so all digital devices share one clock.
Tip: Recording the analogue input is still possible in ADDA DIRECT mode.
Workflow 4: DSD multitrack recording with cascaded units
Record a band or ensemble to DSD on several synchronised tracks.
Connections
| Connect | To |
|---|---|
| Stereo mic preamps | ANALOG INPUTS (BALANCED) of each unit |
| Master unit DIGITAL OUT | Slave unit DIGITAL IN [S/PDIF / CASCADE] |
| Master WORD SYNC THRU/OUT | Slave WORD SYNC IN |
| Console for monitoring | ANALOG OUTPUTS (BALANCED) |
Setup
- Insert identical SD cards and set the same recording format in every unit.
- On the master set CLOCK MSTR to Internal and CASCADE to MASTER; on the slaves set WORD and SLAVE.
- Set the 75Ω and THRU/WORD OUT switches as the manual shows for master, slaves and the last slave.
- Press RECORD and PLAY on the master unit to start every unit together.
Tip: Eight units record up to 16 tracks at a time.
Workflow 5: Master clock for a digital studio
Use the TCXO clock of the DA-3000SD as the reference for other digital devices.
Connections
| Connect | To |
|---|---|
| Digital mixer or recorder word clock input | WORD SYNC THRU/OUT |
| Digital audio device | DIGITAL OUT [AES/EBU] or [S/PDIF] |
Setup
- Set CLOCK MSTR to Internal on the GENERAL page.
- Set the THRU/WORD OUT switch to WORD OUT.
- Set the sampling rate on the REC FILE page; word clock follows it.
- Set the connected devices to follow their word clock input.
Workflow 6: Playback and backup
Play finished masters and keep safe copies.
Connections
| Connect | To |
|---|---|
| Amplifier or mixer | ANALOG OUTPUTS or DIGITAL OUT |
| USB flash drive | PLAY/COPY port |
| RC‑10 remote | Remote sensor on the front |
Setup
- Open BROWSE to choose a folder, or register tracks in a playlist.
- Set PLAY MODE, REPEAT and TRACK GAP (GAPLESS for divided recordings).
- Play with the front panel or the RC-10 remote.
- Use MEDIA > COPY to copy the whole SD card to a USB flash drive.
Tip: The destination media is formatted before copying, so use an empty drive with enough capacity.
