TASCAM TM-200SG

Product overview

The TASCAM TM-200SG is a compact shotgun condenser microphone for vlogging, video shooting and any situation where fixed audio is not an option, delivering high-quality, mix-ready audio in a rugged, small form factor.

Designed to be heard, not seen, it balances audio quality with a lightweight 53 g body, so the microphone is the least of your worries while shooting in the field. Super-cardioid directivity focuses on the sound you want and leaves unwanted sounds behind, and a natural-sounding built-in low-cut filter reduces wind and environmental hum. A windscreen, a mic clip with shoe mount and a soft case are included so you can set up in the field and record right away.

Key features

• Compact and lightweight: 23 mm x 153 mm, 53 g
• Super-cardioid directivity for focused, clean audio
• Built-in low-cut filter (3 dB/oct at 160 Hz) for wind and environmental noise
• Back electret condenser element, 30 Hz - 20 kHz
• Maximum SPL 132 dB, S/N ratio 74 dB
• Operates with +48V phantom power, 3-pin XLR male output
• Windscreen, shoe-mount mic clip and soft case included

Super-cardioid focus

The TM-200SG captures the sound in front of it while rejecting sound from the sides, so dialogue and the sound you aim at stand out and post-production becomes easier.

Low-cut filter at the flick of a switch

Switch ① on the body selects flat, to record the original sound as it is, or low cut, to reduce low-frequency noise from wind, air conditioning or projectors without cutting into the vital frequencies of the voice.

Made for cameras

The included mic clip with shoe mount puts the TM-200SG on the accessory shoe of a camera or a rig. Connect it to a phantom-powered XLR input, such as a TASCAM CA-XLR2d camera adapter or a TASCAM field recorder. In Japan TASCAM includes the TM-200SG in its CA-SET starter set with the CA-XLR2d.

In the box

• TASCAM TM-200SG shotgun microphone
• Shoe-mount mic clip
• Storage bag (soft case)
• Windscreen
• Owner's Manual (including warranty)

TASCAM TM-200SG: frequently asked questions

Does the TM-200SG need phantom power?

Yes. It operates with 48 V DC phantom power from the connected mixer, recorder or XLR camera adapter.

What does the low-cut switch do?

In the low-cut position it reduces low-frequency noise such as wind, air conditioning or projector hum (3 dB/oct at 160 Hz). In the flat position it records the original sound unchanged.

Can I mount it on a camera?

Yes. The included mic clip has a shoe mount for the accessory shoe of a camera or rig.

What is included?

The microphone, a shoe-mount mic clip, a storage bag, a windscreen and the Owner's Manual with warranty.

Where can I buy the TASCAM TM-200SG in India?

The TASCAM TM-200SG is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Vlogging on camera

Clear voice for vlogs with the microphone on the camera.

Connections

Setup

1. Mount the clip on the camera shoe and insert the TM-200SG.
2. Fit the windscreen for outdoor shooting.
3. Connect the XLR cable with phantom power off, then switch phantom power on.
4. Set the level and set switch ① to low cut if there is wind.

Tip: Aim the front end of the microphone at yourself or your subject.

Workflow 2: Video shoot with a field recorder

Record clean audio separately on a TASCAM recorder mounted on the rig.

Connections

Setup

1. Mount the TM-200SG and point it at the subject.
2. Connect it to the recorder's XLR input.
3. Turn on phantom power (48 V) and set the input level.
4. Record and monitor on headphones.

Workflow 3: Outdoor interview

Focus on the speaker and keep traffic and wind lower.

Connections

Setup

1. Fit the windscreen.
2. Set switch ① to low cut.
3. Aim the shotgun at the speaker.
4. Set the level and record.

Workflow 4: Indoor presentation or seminar recording

Reduce air-conditioning and projector noise in a room recording.

Connections

Setup

1. Place the microphone on a stand pointed at the presenter.
2. Set switch ① to low cut for air conditioning or projector noise.
3. Connect and switch on phantom power.
4. Set the level and record.

Tip: Keep the microphone away from loudspeakers to avoid feedback.

Workflow 5: Field recording and ambience

Capture sounds outdoors with a light, rugged microphone.

Connections

Setup

1. Fit the windscreen.
2. Choose flat for the full low end or low cut for wind.
3. Point the microphone at the sound source.
4. Record and check on headphones.

Workflow 6: Online content at the desk

Focused voice for tutorials and streams recorded with a camera or interface.

Connections

Setup

1. Mount the microphone just outside the picture, aimed at you.
2. Connect it to the interface and switch on phantom power.
3. Use low cut if fans or air conditioning are audible.
4. Set the level and record or stream.