








TONEWINNER TD-3
PRICE ON ENQUIRY
Tonewinner TD-3 two-way hi-fi bookshelf speaker: 1.1" dome tweeter, 7" Kevlar mid-bass, stepped 50 mm MDF baffle, rear port, 40 Hz - 25 kHz, 8 Ω. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
General
| Model | TD-3 |
| Series | TD series |
| Type | Two-way, two-driver hi-fi bookshelf speaker, rear bass reflex |
Drivers
| Tweeter | 1.1" × 1, dome, 28 mm voice coil |
| Mid-bass | 7" × 1, Kevlar synthetic fibre cone, rubber surround |
| Crossover | Third-order high pass (MKP), second-order mid-bass (OFC inductor) |
Acoustic performance
| Frequency response | 40 Hz - 25 kHz |
| Harmonic frequency | 40 Hz ± 20 % |
| Sensitivity | 85 dB (± 3 dB) |
| Rated impedance | 8 Ω |
| Rated output power | 10-100 W |
Inputs
| Terminals | 2 pairs, 24K gold-plated OFC |
Physical
| Cabinet | MDF: 50 mm front panel, 25 mm sides |
| Dimensions | 230 × 360 × 405 mm |
| Net weight | 13.5 kg per piece |
| Gross weight | 30 kg for two pieces |
Finishes
| Finish | Black front, rosewood veneer sides |
Product overview
The Tonewinner TD-3 is a two-way, two-driver hi-fi bookshelf speaker with a 1.1-inch dome tweeter, a 7-inch Kevlar-fibre mid-bass unit, a stepped 50 mm MDF front baffle and a rear bass reflex vent, finished in black with rosewood veneer sides.
The TD-3 has a black and red exterior with smooth, linear surfaces. Its front panel is 50 mm thick medium-density fibreboard and the sides are 25 mm, forming a solid, sturdy enclosure. The front is painted black, while the sides carry rosewood veneer with smooth corners, polished to a bright finish.
The front panel is shaped as two small steps with the tweeter set back, so that the sound-producing points of the tweeter and the mid-bass unit sit on the same plane and the phase gap between them is reduced. A black grille of high-density cloth with an automatic snap-action fixing protects the drivers.
The 1.1-inch tweeter uses a thin, soft dome diaphragm with a 28 mm voice coil to reduce distortion caused by vibration in the midrange crossover region; its non-resonant design gives accurate placement of sound. The 7-inch mid-bass unit uses a Kevlar synthetic fibre cone with good damping and a patented durable rubber surround, reaching as low as 40 Hz with deep, melodious bass. Drivers are tested in matched pairs to within 0.1 %.
The crossover uses a third-order high-pass filter with metallised polypropylene film (MKP) capacitors and a second-order mid-bass filter with a professional non-polar capacitor and a large oxygen-free copper inductor, wired internally with hi-fi cable. At the back, the bass reflex vent is moulded in one piece with the cabinet and smoothly shaped to reduce colouration, and two pairs of 24K gold-plated OFC terminals take the speaker cables.
| dome tweeter, Kevlar mid-bass | 1.1" + 7" |
| frequency response | 40 Hz - 25 kHz |
| rated output power, 8 Ω | 10-100 W |
| net weight per speaker | 13.5 kg |
Key features
- Two-way, two-driver hi-fi bookshelf speaker with rear bass reflex
- 1.1-inch dome tweeter with thin, soft diaphragm and 28 mm voice coil
- 7-inch Kevlar synthetic fibre mid-bass with patented durable rubber surround
- Stepped front baffle aligns the tweeter and mid-bass to reduce the phase gap
- 50 mm MDF front panel and 25 mm sides for a solid enclosure
- Third-order MKP high-pass and second-order OFC-inductor mid-bass crossover
- Drivers matched in pairs to within 0.1 %
- One-piece, smoothly shaped rear bass reflex vent
- Two pairs of 24K gold-plated OFC binding posts
- Rosewood veneer sides, black front and high-density cloth snap-on grille
Made for
- Hi-fi stereo systems in living rooms and listening rooms
- Pairing with the Tonewinner AD-3PRO hi-fi amplifier and TY-50 CD player
- Music lovers who want deep bass from a bookshelf speaker
- Front speakers for a home theatre
In the box
- TD-3 bookshelf speaker
- Black cloth grille
Connections
- Two pairs of 24K gold-plated OFC binding posts on the rear panel
Tonewinner TD-3: frequently asked questions
Why is the front panel stepped?
The tweeter is set back so that the sound-producing points of the tweeter and the mid-bass unit are on the same level, which reduces the phase gap between them.
Which Tonewinner system is recommended with it?
The AD-3PRO hi-fi amplifier with the TY-50 CD player.
How deep does the bass go?
The 7-inch Kevlar mid-bass unit handles frequencies as low as 40 Hz, and the published frequency response is 40 Hz - 25 kHz.
What amplifier power suits it?
The rated output power is 10-100 W into 8 Ω, with a sensitivity of 85 dB (± 3 dB).
How solid is the cabinet?
Very solid: the front panel is 50 mm MDF and the sides 25 mm, and each speaker weighs 13.5 kg.
Where can I buy the Tonewinner TD-3 in India?
The Tonewinner TD-3 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Recommended Tonewinner CD system
Listeners building a complete disc-based hi-fi system.
Connections
| Connect | To |
|---|---|
| TY-50 CD player analogue output | AD-3PRO amplifier input |
| AD-3PRO L / R speaker outputs | Two TD-3 |
Setup
- Place the speakers on rigid stands, tweeters near ear height, in an equal triangle with the seat.
- Leave space behind each speaker for the rear bass reflex vent.
- Connect the CD player to the amplifier.
- Wire the speakers to the gold-plated terminals with matching polarity.
- Play a familiar disc and fine-tune toe-in and wall distance.
Tip: This is the configuration Tonewinner recommends for the TD-3.
Workflow 2: Living-room stereo
Families who want strong, deep sound from a bookshelf pair.
Connections
| Connect | To |
|---|---|
| Streamer or CD player | Integrated amplifier input |
| Integrated amplifier outputs | Two TD-3 |
Setup
- Place the speakers on stands either side of the TV or cabinet.
- Connect them to the amplifier.
- Play music and adjust the rear wall distance for even bass.
- Fit the snap-on grilles to protect the drivers.
Tip: The 7-inch mid-bass reaches 40 Hz, so many rooms need no subwoofer for music.
Workflow 3: Dedicated listening room
Enthusiasts with a room for music.
Connections
| Connect | To |
|---|---|
| Hi-fi amplifier outputs | Two TD-3 on stands |
Setup
- Start with the speakers about one third of the way into the room.
- Toe them in slightly towards the seat.
- Use solid, level stands for the 13.5 kg cabinets.
- Fine-tune positions for focus and bass balance.
Tip: The stepped baffle aligns the drivers best when the tweeter is close to ear height.
Workflow 4: Two-amplifier connection
Enthusiasts who use the two pairs of terminals.
Connections
| Connect | To |
|---|---|
| Amplifier 1 outputs | First pair of terminals on each TD-3 |
| Amplifier 2 outputs | Second pair of terminals on each TD-3 |
Setup
- Use two matched stereo amplifiers fed from one preamplifier.
- Connect one amplifier to each pair of terminals.
- Match the amplifier gains.
- Listen and adjust.
Tip: Use good speaker cable to each of the 24K gold-plated OFC terminals.
Workflow 5: Vinyl corner
Record collectors.
Connections
| Connect | To |
|---|---|
| Turntable | Phono stage or amplifier phono input |
| Amplifier outputs | Two TD-3 |
Setup
- Keep the turntable on its own stable shelf away from the speakers.
- Connect it through a phono stage to the amplifier.
- Wire the TD-3 pair to the amplifier.
- Set the level and enjoy the deep, melodious bass.
Tip: Separate the turntable from the speakers to avoid acoustic feedback.
Workflow 6: Front speakers for a home theatre
Homes using the TD-3 for music and films.
Connections
| Connect | To |
|---|---|
| AV receiver front L / R terminals | Two TD-3 |
| AV receiver centre, surround and subwoofer outputs | Other speakers and subwoofer |
Setup
- Place the TD-3 at the front left and right of the screen.
- Connect them to the receiver's front channels.
- Set them as front speakers in the receiver.
- Calibrate levels and distances.
Tip: The 8 Ω load suits most AV receivers.








