




TOTEM ACOUSTIC Bison Center
PRICE ON ENQUIRY
Totem Acoustic Bison Center: ported two-way centre channel, 5.25-inch woofers, 1.3-inch soft dome tweeter, 42 Hz - 21 kHz, made in Canada. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
Acoustic performance
| Design | Ported two-way centre speaker |
| Frequency response | 42 Hz - 21 kHz ± 3 dB |
| Sensitivity | 90 dB |
| Impedance | 6 Ω |
| Recommended amplifier power | 30 - 150 W |
| Crossover frequency | 2.5 kHz (first order) |
Drivers
| Woofers | 5.25 in (133.35 mm), copper-clad voice coil |
| Tweeter | 1.3 in (33 mm) laser-etched textile soft dome |
Connections
| Speaker terminals | Four-way, bi-wireable |
| Accepted connections | Bare wire, pin connectors, banana plugs, spade lugs 8.1 - 9 mm (5/16 - 3/8 in) |
Placement
| Height above the floor | 20 - 30 in (50.8 - 76.2 cm), centred to the screen |
| Break-in time | 70 - 100 hours |
Physical
| Width | 575 mm (22.638 in) |
| Height | 160 mm (6.299 in) |
| Depth | 230 mm (9.055 in); 240 mm (9.448 in) with grille installed |
| Weight | 10.61 kg (23.40 lb) |
| Grille | Magnetic, included |
| Made in | Canada |
Versions
| BISON-CENTER-BLACK-ASH | Black Ash |
| BISON-CENTER-BLACK-WALNUT | Black Walnut |
| BISON-CENTER-WHITE-OAK | White Oak |
| BISON-CENTER-SATIN-WHITE | Satin White |
Product overview
The Totem Acoustic Bison Center is the centre channel of the Bison series, made entirely in Canada: a ported two-way design with custom 5.25-inch woofers either side of a 1.3-inch laser-etched textile soft dome tweeter, sized to fit into just about any AV furniture.
The Bison Center brings tremendous articulation, rhythm and dynamics to multichannel systems, for lifelike vibrancy with films, TV, games and music. It is designed to project a very large soundstage that balances micro-nuances, truthful voicing and a commanding presence.
It shares the DNA of the other Bison series speakers, so it offers the same immersive musical dimensionality and extension, and completes a surround system built with the Bison Tower, Bison Twin Tower or Bison Monitor.
The custom 5.25-inch (133.35 mm) woofers have copper-clad voice coils and the custom 1.3-inch (33 mm) tweeter a laser-etched textile soft dome; a hand-made first-order crossover joins them at 2.5 kHz. At 575 mm wide and 160 mm high, the cabinet fits inside AV furniture or sits on a console cabinet or table where the TV is wall-mounted. Artisanal construction, four-way bi-wireable terminals and a magnetic grille complete it, in Black Ash, Black Walnut, White Oak or Satin White.
| Frequency response (± 3 dB) | 42 Hz - 21 kHz |
| Sensitivity | 90 dB |
| Recommended amplifier power | 30 - 150 W |
| Impedance | 6 Ω |
Key features
- Centre channel of the Bison series, made entirely in Canada
- Custom 5.25-inch woofers with copper-clad voice coils
- Custom 1.3-inch (33 mm) laser-etched textile soft dome tweeter
- Hand-made first-order crossover at 2.5 kHz
- Ported two-way design
- Articulation, rhythm and dynamics for lifelike multichannel sound
- Compact 575 × 160 mm front for AV furniture, console cabinets and tables
- Artisanal cabinet construction
- Bi-wireable four-way speaker terminals
- Magnetic grille included
- Finishes: Black Ash, Black Walnut, White Oak and Satin White
Made for
- Centre channel of a 5.1 or 7.1 home theatre with Bison series speakers
- Dialogue and main action from the screen
- Inside AV furniture, or on a console cabinet or table below a wall-mounted TV
- Films, TV, video games and multichannel music
Placement and set-up
- Centred to the screen, 20 - 30 in (50.8 - 76.2 cm) above the floor
- Preferably equidistant from the front left and right speakers
- Surrounds behind and beside the listening area at about 6 ft (183 cm) high; in 7.1, also behind the listening position
- Break-in: 70 - 100 hours of music, without very loud levels during that time
In the box
- Bison Center loudspeaker
- Magnetic grille
- Jumpers fitted between the terminals
Connections
- Bi-wireable four-way speaker terminals (two sets), for single-wire, bi-wire or bi-amp connection
- The terminals accept bare wire (wrapped around or through the post), pin connectors, banana plugs and spade lugs of 8.1 - 9 mm (5/16 - 3/8 in)
- Jumpers installed at the factory for single-wire connection
Finishes
- Black Ash, with black magnetic grille
- Black Walnut
- White Oak, with white magnetic grille
- Satin White, with white magnetic grille
Totem Acoustic Bison Center: frequently asked questions
Which speakers does the Bison Center match?
It shares the DNA of the other Bison series speakers, the Bison Tower, Bison Twin Tower and Bison Monitor, and is designed as the centre channel for Bison surround systems.
Will the Bison Center fit in my TV unit?
It measures 575 mm wide, 160 mm high and 230 mm deep (240 mm with the grille), and Totem designed it to fit into just about any AV furniture. It can also sit on a console cabinet or table in rooms where the TV is wall-mounted.
Where should the Bison Center be placed?
Centred to the screen, 20 - 30 in (50.8 - 76.2 cm) above the floor and preferably equidistant from the front left and right speakers, so dialogue and the main action come from the screen.
What amplifier power does the Bison Center need?
Totem recommends 30 - 150 W into 6 Ω. Turn the volume down as soon as distortion starts: amplifier distortion is the most common cause of speaker damage.
Where can I buy the Totem Acoustic Bison Center in India?
The Totem Acoustic Bison Center is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Bison 5.1 living-room theatre
Families building a complete Bison surround system for films, TV and games.
Connections
| Connect | To |
|---|---|
| TV with HDMI eARC | AV receiver HDMI eARC input |
| AV receiver centre output | Bison Center terminals, jumpers in place |
| AV receiver front L / R outputs | Bison Tower or Bison Twin Tower |
| AV receiver surround outputs | Bison Monitors |
| AV receiver subwoofer pre-out | Subwoofer |
Setup
- Centre the Bison Center to the screen, 20 - 30 in (50.8 - 76.2 cm) above the floor.
- Place the towers either side of the screen, equidistant from the centre.
- Place the Bison Monitor surrounds behind and beside the seating at about 6 ft (183 cm) high.
- Put the subwoofer where it fits best; closer to a corner gives more bass.
- With everything switched off, make the connections; then set distances and levels in the AV receiver.
Tip: Slight changes of position can bring substantially better performance: experiment.
Workflow 2: Centre inside a TV unit
Living rooms where the centre channel sits in an open shelf of the AV furniture.
Connections
| Connect | To |
|---|---|
| AV receiver centre output | Bison Center terminals |
Setup
- Choose a shelf that gives a height of 20 - 30 in (50.8 - 76.2 cm) above the floor, centred under the screen.
- Bring the front of the speaker to the front edge of the shelf.
- Check that the 575 × 160 × 240 mm size (with grille) fits the shelf opening.
- Fit the magnetic grille for a tidy look, or remove it for the cleanest sound.
Tip: Keep the centre equidistant from the left and right speakers for a stable image across the screen.
Workflow 3: Wall-mounted TV with the centre on a console
Homes where the TV hangs on the wall above a console cabinet or table.
Connections
| Connect | To |
|---|---|
| TV with HDMI eARC | AV receiver HDMI eARC input |
| AV receiver centre output | Bison Center |
Setup
- Place the Bison Center on the console cabinet or table, centred under the TV.
- Keep the speaker as close to 20 - 30 in (50.8 - 76.2 cm) above the floor as the furniture allows.
- Run the speaker cable with the equipment switched off, red (+) to red (+), black (-) to black (-).
- Set the centre level in the AV receiver so voices balance with the front speakers.
Tip: Bass loss and a distorted image are signs of reversed polarity: check every connection.
Workflow 4: Bison 7.1 cinema room
Home owners building a dedicated cinema room around Bison speakers.
Connections
| Connect | To |
|---|---|
| Media player | AV receiver HDMI input |
| AV receiver centre output | Bison Center |
| Front, surround and back-surround outputs | Bison Towers and Bison Monitors |
Setup
- Centre the Bison Center to the screen at 20 - 30 in (50.8 - 76.2 cm) above the floor.
- Place the front towers as for stereo.
- Place the surrounds beside the seating at about 6 ft (183 cm) and the back surrounds behind the listening position.
- Set distances and levels in the AV receiver, then fine-tune positions.
Tip: Stay within the recommended 30 - 150 W and turn the volume down at the first sign of distortion.
Workflow 5: Bi-wired centre with Totem Tress cable
Listeners who want separate cable runs to the woofer and tweeter sections of the centre.
Connections
| Connect | To |
|---|---|
| AV receiver centre output | Totem bi-wire Tress speaker cable |
| Bi-wire ends of the cable | Both sets of Bison Center terminals, jumpers removed |
Setup
- Switch the AV receiver off before making any connection.
- Remove the jumpers between the two sets of terminals.
- Connect one pair of conductors to each set of terminals, keeping the polarity the same everywhere.
- Switch on at low volume and check that bass and treble play.
Tip: Tress is thin enough to run long distances in-wall and around the room.
Workflow 6: Gaming and TV room
Gamers and families who want clear dialogue and effects from the screen.
Connections
| Connect | To |
|---|---|
| Game console | AV receiver HDMI input |
| AV receiver HDMI output | TV |
| AV receiver centre output | Bison Center |
Setup
- Centre the Bison Center under the screen.
- Use the AV receiver's level settings to balance the centre with the front speakers.
- Keep the volume below the point where the amplifier starts to distort.
- Allow 70 - 100 hours of break-in at moderate levels.
Tip: With most material, an amplifier reaches its maximum power between the 11 and 1 o'clock positions of the volume control.








