TOTEM ACOUSTIC Element Wood V2 product guide and data sheet cover
‹
TOTEM ACOUSTIC Element Wood V2 product guide and data sheet coverTOTEM ACOUSTIC Element Wood V2 data sheet page 2: The centre of an Element systemTOTEM ACOUSTIC Element Wood V2 data sheet page 3: Torrent woofers without a crossoverTOTEM ACOUSTIC Element Wood V2 data sheet page 4: Titanium dome tweeterTOTEM ACOUSTIC Element Wood V2 data sheet page 5: A multi-angled cabinetTOTEM ACOUSTIC Element Wood V2 data sheet page 6: Reflex ports and bi-wire terminalsTOTEM ACOUSTIC Element Wood V2 data sheet page 7: Placement in a home theatreTOTEM ACOUSTIC Element Wood V2 data sheet page 8: Grilles and finishesTOTEM ACOUSTIC Element Wood V2 data sheet page 9: Amplification and break-inTOTEM ACOUSTIC Element Wood V2 data sheet page 10: Specifications
›

Brand: TOTEM ACOUSTIC

TOTEM ACOUSTIC Element Wood V2

PRICE ON ENQUIRY

Category: Centre & Surround Speakers | Series: ELEMENT V2

Totem Acoustic Element Wood V2 centre channel: two crossover-free 6-inch Torrent woofers, 1-inch titanium tweeter, 42 Hz - 22 kHz. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

Acoustic performance

TypeCentre channel loudspeaker
Frequency response42 Hz - 22 kHz ± 3 dB
Sensitivity92 dB
Impedance6 Ω
Recommended amplifier power200 W
CrossoverFirst order, on the tweeter only

Drivers

Woofers2 × 6-inch Torrent, hand-assembled, fully rear-damped cones
Tweeter1-inch titanium dome with 3/8-inch aluminium faceplate
PortsPrecision-machined reflex ports

Connections

Speaker terminalsBi-wireable premium connectors on an annealed aluminium plate
Accepted connectionsBare wire, pin connectors, banana plugs, spade lugs 8.1 - 9 mm (5/16 - 3/8 in)

Placement

Placement from rear wall6 in to 5 ft (15.2 - 152.4 cm)
Placement distance apartNot applicable
Height above the floor20 - 30 in (50.8 - 76.2 cm), centred to the screen
Break-in time200 - 300 hours

Physical

Dimensions (W × H × D)698.5 × 190.5 × 273.1 mm (27.5 × 7.5 × 10.75 in)
Weight10.43 kg (22.94 lb)
CabinetMulti-angled geometric design with no parallel surfaces, borosilicate damping
Finish4-coat polyester
GrilleMatching magnetic grille, included
Made inMontreal, Quebec, Canada (engineered and hand-built)

Versions

ELEMENT-WOOD-V2-DUSKDusk
ELEMENT-WOOD-V2-ICEIce

Product overview

The Totem Acoustic Element Wood V2 is the centre channel of the Element V2 series: a geometric, multi-angled cabinet with two hand-assembled 6-inch Torrent woofers and a 1-inch titanium dome tweeter, voiced to match the Element Fire V2 and Element Metal V2.

Crafted for extreme performance, the Wood V2 gives real soundscape integration and is the complementary unit for a full surround system built on Element speakers. Dialogue and the main action come from the screen, and the centre is carefully voiced to blend seamlessly with the Fire V2 monitors or the Metal V2 towers at the front left and right.

Its two 6-inch Torrent woofers are micro-machined and hand-assembled by Totem. Multiple 2.5-inch neodymium magnets encircle each voice coil in a proprietary magnetic field design, and the Torrent needs no crossover in its frequency path, so the signal reaches the woofers without interruption and the amplifier controls their excursion directly. The 6-inch cones are fully rear-damped, and the Torrent gives a midrange of striking articulation, organic harmonics, speed, clarity and detail.

The 1-inch titanium dome tweeter has a 3/8-inch thick aluminium faceplate and finned rear chamber made from a single solid piece of metal, which works as a large radiator and keeps the tweeter stable and cool. A first-order crossover on the tweeter is the only crossover in the speaker, and the imaging does not shift at the listening position, even through big dynamic swings.

The cabinet has a geometric design with no parallel surfaces and borosilicate paint inside. Precision-machined reflex ports, bi-wireable premium terminals on a custom-machined, annealed aluminium plate and grilles that attach with hidden magnets complete it. The Wood V2 comes in gleaming 4-coat polyester finishes, Dusk (black) and Ice (white), and is engineered and hand-built in Montreal, Quebec, Canada.

Frequency response (± 3 dB) 42 Hz - 22 kHz
Sensitivity 92 dB
Recommended amplifier power 200 W
Impedance 6 Ω

Key features

  • Centre channel of the Element V2 series, voiced to match the Element Fire V2 and Element Metal V2
  • Two 6-inch Torrent woofers, micro-machined and hand-assembled, with fully rear-damped cones
  • No crossover in the low-frequency path: the amplifier drives the woofers directly
  • 1-inch titanium dome tweeter with 3/8-inch aluminium faceplate and finned aluminium chamber
  • First-order crossover on the tweeter only
  • Multi-angled geometric cabinet with no parallel surfaces and borosilicate damping inside
  • Precision-machined reflex ports
  • Bi-wireable premium speaker terminals on a custom-machined, annealed aluminium plate
  • Matching magnetic grilles with hidden magnets, included
  • Gleaming 4-coat polyester finishes: Dusk and Ice
  • Engineered and hand-built in Montreal, Quebec, Canada

Made for

  • Centre channel of a 5.1 or 7.1 home theatre with Element Fire V2 or Element Metal V2 front speakers
  • Dialogue and main action from the screen in a living room or a dedicated cinema room
  • Films, TV, video games and multichannel music

Placement and set-up

  • Centred to the screen, 20 - 30 in (50.8 - 76.2 cm) above the floor, preferably equidistant from the front left and right speakers
  • 6 in to 5 ft (15.2 - 152.4 cm) from the rear wall
  • Surrounds behind and beside the listening area at about 6 ft (183 cm) high; in 7.1, also behind the listening position
  • Break-in: 200 - 300 hours of music, without very loud levels during that time

In the box

  • Element Wood V2 centre channel loudspeaker
  • Matching magnetic grille

Connections

  • Bi-wireable premium speaker terminals (two sets) on an annealed aluminium plate, for single-wire, bi-wire or bi-amp connection
  • The terminals accept bare wire (wrapped around or through the post), pin connectors, banana plugs and spade lugs of 8.1 - 9 mm (5/16 - 3/8 in)
  • Jumpers between the two sets of terminals for single-wire connection

Finishes

  • Dusk (black): 4-coat polyester, with matching magnetic grille
  • Ice (white): 4-coat polyester, with matching magnetic grille

Totem Acoustic Element Wood V2: frequently asked questions

Which speakers does the Element Wood V2 match?

It is the centre channel designed for the Element series and is carefully voiced to match the Element Fire V2 and the Element Metal V2 seamlessly, for stunning synergy in surround systems.

Where should the Element Wood V2 be placed?

Centred to the screen, 20 - 30 in (50.8 - 76.2 cm) above the floor and preferably equidistant from the main speakers, between 6 in and 5 ft (15.2 - 152.4 cm) from the rear wall.

What amplifier power does the Element Wood V2 need?

Totem recommends 200 W. More clean amplifier power is safer than an amplifier pushed into distortion, the most common cause of speaker damage: turn the volume down as soon as distortion starts.

Can the Element Wood V2 be bi-wired?

Yes. It has bi-wireable premium terminals on an annealed aluminium plate. For a single cable, keep the jumpers in place between the two sets of terminals; make every connection with the equipment switched off.

How long does the Element Wood V2 take to break in?

Allow 200 - 300 hours of actual music playing, and avoid very loud levels during that time.

Where can I buy the Totem Acoustic Element Wood V2 in India?

The Totem Acoustic Element Wood V2 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Living-room 5.1 with Element Fire V2

Families building a full Element home theatre for films, TV and games in the living room.

Connections

ConnectTo
TV with HDMI eARCAV receiver HDMI eARC input
AV receiver centre speaker outputElement Wood V2 terminals, jumpers in place
AV receiver front L / R outputsElement Fire V2 monitors on stands
AV receiver subwoofer pre-outSubwoofer

Setup

  1. Centre the Wood V2 to the screen, 20 - 30 in (50.8 - 76.2 cm) above the floor.
  2. Keep it equidistant from the front left and right Fire V2 speakers.
  3. Leave 6 in to 5 ft (15.2 - 152.4 cm) between the Wood V2 and the rear wall.
  4. Place the surround speakers behind and beside the seating at about 6 ft (183 cm) high.
  5. With everything switched off, connect the speakers; then set distances and levels in the AV receiver.

Tip: The Wood V2 is voiced to match the Fire V2, so voices pan smoothly across the front.

Workflow 2: Dedicated 7.1 cinema room with Element Metal V2

Home owners building a dedicated cinema room with Element towers at the front.

Connections

ConnectTo
Media playerAV processor or AV receiver HDMI input
AV receiver centre outputElement Wood V2
AV receiver front L / R outputsElement Metal V2 towers
Surround and back-surround outputsSurround speakers

Setup

  1. Place the Metal V2 towers as for stereo, either side of the screen.
  2. Centre the Wood V2 to the screen at 20 - 30 in (50.8 - 76.2 cm) above the floor.
  3. Mount the surrounds beside and behind the seating at about 6 ft (183 cm), with the back surrounds behind the listening position.
  4. Put the subwoofer where it fits best; closer to a corner gives more bass.
  5. Set distances and levels in the AV receiver and fine-tune positions in small steps.

Tip: Slight changes of position can bring substantially better performance: experiment.

Workflow 3: Centre on a TV unit

Living rooms where the centre channel sits on a low cabinet below the TV.

Connections

ConnectTo
AV receiver centre speaker outputElement Wood V2 terminals

Setup

  1. Place the Wood V2 on a sturdy TV unit, centred under the screen.
  2. Aim for a height of 20 - 30 in (50.8 - 76.2 cm) above the floor.
  3. Bring the front of the speaker to the front edge of the unit and keep at least 6 in (15.2 cm) to the wall behind.
  4. Fit the magnetic grille, or leave it off for a clean, minimal front.

Tip: Keep the centre equidistant from the left and right speakers for a stable image across the screen.

Workflow 4: Bi-wired centre with Totem Tress cable

Listeners who want separate cable runs to the woofer and tweeter sections of the centre channel.

Connections

ConnectTo
AV receiver centre outputSingle-stranded end of the Totem bi-wire Tress speaker cable
Double-stranded end of the Tress cableBoth sets of Element Wood V2 terminals, jumpers removed

Setup

  1. Switch the AV receiver off before making any connection.
  2. Remove the jumpers between the two sets of terminals.
  3. Connect the single-stranded end of the bi-wire Tress cable to the receiver and the double-stranded end to both sets of terminals.
  4. Keep the polarity the same on every terminal: positive to positive, negative to negative.
  5. Switch on at low volume and check that both bass and treble play.

Tip: Tress is thin enough to run long distances in-wall and around the room.

Workflow 5: Adding a centre to an Element stereo system

Owners of Element Fire V2 or Metal V2 speakers who want to move from stereo to surround.

Connections

ConnectTo
New AV receiver front L / R outputsExisting Element Fire V2 or Metal V2 speakers
AV receiver centre outputElement Wood V2

Setup

  1. Keep the front speakers where they sound best: the placement guidelines for the front two channels are the same in stereo and surround.
  2. Add the Wood V2 centred to the screen between them.
  3. Add surround speakers and a subwoofer as the room allows.
  4. Allow the new centre 200 - 300 hours of break-in at moderate levels.

Tip: The Wood V2 is designed specifically for the Element series, for stunning synergy in surround systems.

Workflow 6: Gaming and TV room

Gamers and families who want clear dialogue and effects from the screen at every volume.

Connections

ConnectTo
Game consoleAV receiver HDMI input
AV receiver HDMI outputTV
AV receiver centre outputElement Wood V2

Setup

  1. Centre the Wood V2 to the screen at 20 - 30 in (50.8 - 76.2 cm) above the floor.
  2. Run the AV receiver within its clean power; Totem recommends 200 W for the Wood V2.
  3. Turn the volume down at the first sign of distortion.
  4. Use the AV receiver's level settings so the centre balances with the front speakers.

Tip: With most material, an amplifier reaches its maximum power between the 11 and 1 o'clock positions of the volume control.

Request a Quote

TOTEM ACOUSTIC Element Wood V2

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›