





TOTEM ACOUSTIC KIN Flex
PRICE ON ENQUIRY
Totem Acoustic KIN Flex: sealed low-profile speaker for table, wall or ceiling, dual 4-inch woofers, titanium dome, bracket included. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
Acoustic performance
| Design | Compact monitor (passive), sealed enclosure, angled baffle |
| Frequency response | 95 Hz - 22 kHz ± 3 dB |
| Sensitivity | 89 dB |
| Impedance | 6 Ω |
| Power handling | 20 - 125 W RMS |
Drivers
| Woofers | Dual 4-inch Natural Hybrid (polymer-treated paper) |
| Tweeter | 1-inch titanium-infused soft dome |
Placement
| Placement from rear wall | Flush - 2 ft (0 - 60.96 cm) |
| Placement distance apart | 3 - 12 ft (91.44 - 365.76 cm) |
| Orientation | Horizontal or vertical; tabletop, wall unit, wall or ceiling |
| Break-in time | 50 - 100 hours |
Physical
| Dimensions (W × H × D) | 370 × 130 × 107 mm (14.55 × 5.11 × 4.21 in) |
| Weight | 4.28 kg (9.45 lb) per speaker |
| Included accessories | Magnetic grille, wall bracket and hardware, two angled pads, adhesive feet |
Versions
| KIN-FLEX-SATIN-WHITE | Satin White |
| KIN-FLEX-SATIN-BLACK | Satin Black |
Product overview
The Totem Acoustic KIN Flex is an ultra-flexible, low-profile sealed speaker with dual 4-inch Natural Hybrid woofers and a 1-inch titanium-infused soft dome tweeter on an angled baffle. With its included wall bracket it works on a tabletop, in a wall unit, on the wall or on the ceiling, horizontally or vertically, as a stereo pair, a three-speaker front stage under the TV or surround effects.
There has never been a speaker as versatile as the KIN Flex. Its sealed enclosure, angled baffle and huge dispersion let it thrive in any position: horizontally, vertically, upside down and even at different heights. Because it is sealed, it performs virtually identically whether it is wall-mounted or placed on a tabletop, and its perfect phase response keeps Totem's three-dimensional, almost holographic soundstage whether it sits high or low.
The new KIN Flex handles more power, plays deeper and is even easier to place than before: the drivers, crossover topology and cabinet dimensions are all new. It is wider, lower and shallower, a low-profile shape that fits easily into furniture, matches TVs and is ideal under a screen. The customised 4-inch Natural Hybrid woofers are made of paper for its acoustic advantages, treated with a polymer to reinforce strength and lifespan, and give powerful, fast and musical bass. The titanium-infused soft dome tweeter combines the smoothness of a soft dome with highs that are detailed, airy and extraordinarily lifelike.
Be creative: place three under the TV for the ultimate sound bar, mount them high and upside down for a stealthy yet room-energising option, or use them as rear effects in a Dolby Atmos system. Paired with the KIN Amp and KIN Sub, the KIN Flex makes a system so small that sounds big, for music, gaming and films.
A magnetic grille, a wall bracket with hardware for horizontal or vertical mounting, angled pads and adhesive acoustic isolation feet are included. The angled pads hold the KIN Flex parallel to the wall when it is mounted vertically, improving dispersion as the left and right speakers of a stereo or LCR set-up. The KIN Flex comes in Satin White or Satin Black.
| Frequency response (± 3 dB) | 95 Hz - 22 kHz |
| Sensitivity | 89 dB |
| Power handling | 20 - 125 W RMS |
| Depth | 107 mm |
Key features
- Ultra-flexible placement: tabletop, wall unit, wall or ceiling, horizontal or vertical, even upside down
- Sealed enclosure for consistent performance in any location
- Angled baffle directs the sound to the listening area
- Dual 4-inch Natural Hybrid woofers: polymer-treated paper for strength and lifespan
- 1-inch titanium-infused soft dome tweeter for detailed, airy highs
- Low-profile, shallow design (370 × 130 × 107 mm) that fits furniture and suits TVs
- Wall bracket included for on-wall or on-ceiling installation
- Angled pads to mount it parallel to the wall in stereo or LCR set-ups
- Acoustic isolation feet eliminate resonance on tabletops
- Magnetic grille included
- Satin White or Satin Black
Made for
- A three-speaker front stage under the TV, as a sound bar
- Rear effects and surrounds in home theatres, including Dolby Atmos systems
- Stereo music on a table, in a wall unit or on the wall
- Compact systems with the KIN Amp and KIN Sub
- Music, gaming and films
Placement and set-up
- Flush to 2 ft (0 - 60.96 cm) from the rear wall
- 3 - 12 ft (91.44 - 365.76 cm) apart; the listening distance is often about 1.5 times the spacing
- Mounted high near the ceiling, the KIN Flex can be placed upside down
- Wall bracket: flat side to the wall, keyways towards the speaker; keyways point down and to the left for horizontal, down and to the right for vertical mounting
- Level the bracket; cables passed through the wall exit through its central opening
- Wood screws into a stud, or wall anchors and screws into drywall; screw the bolts into the speaker and hang it on the keyways
- On a table or shelf, apply the adhesive feet to the four bottom corners
- Break-in: 50 - 100 hours of music playing, without very loud levels during that time
In the box
- KIN Flex loudspeaker
- Magnetic grille
- Wall bracket with wood screws, wall anchors and bolts
- Two angled pads
- Adhesive-backed isolation feet
Connections
- One pair of gold-plated binding posts (red + / black -) for the amplifier's speaker output
- Recessed in the back, accessible through the wall bracket's central opening
Finishes
- Satin White
- Satin Black
Totem Acoustic KIN Flex: frequently asked questions
Can I use three KIN Flex as a sound bar?
Yes. Totem suggests positioning three under the TV for the ultimate sound bar, as the left, centre and right channels of an AV receiver. The low-profile, shallow cabinet suits placement under a TV.
Can the KIN Flex be mounted on the wall or ceiling?
Yes. The included bracket permits easy on-wall or on-ceiling installation, horizontally or vertically. Because the KIN Flex is sealed, it performs virtually the same on the wall as on a tabletop.
What are the angled pads for?
Two supplied angled pads go on the back of the bracket to compensate for the angled baffle and hold the KIN Flex parallel to the wall. This is useful when it is mounted vertically as the left and right speakers of a stereo or LCR set-up.
Is the KIN Flex a powered speaker?
No. It is passive and needs an amplifier or AV receiver. Its power handling is 20 - 125 W RMS and its impedance 6 Ω. It pairs naturally with the KIN Amp and KIN Sub.
How close to the wall can it go?
From flush against the wall to 2 ft (60.96 cm) away. Because the KIN Flex is sealed, it performs virtually identically on the wall, in a wall unit or on a tabletop.
Where can I buy the Totem Acoustic KIN Flex in India?
The Totem Acoustic KIN Flex is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Three-speaker sound bar under the TV
Living rooms that want clear dialogue and wide sound from a slim line of speakers under the screen.
Connections
| Connect | To |
|---|---|
| TV with HDMI eARC | AV receiver HDMI eARC input |
| AV receiver front L / C / R speaker outputs | Three KIN Flex speakers, horizontal |
Setup
- Place three KIN Flex horizontally under the TV, on the TV unit or wall-mounted with the brackets.
- On a tabletop, apply the adhesive isolation feet to the four bottom corners of each speaker.
- With everything switched off, connect left, centre and right, red to red and black to black.
- Set speaker distances and levels in the receiver.
- Add a subwoofer to the receiver's subwoofer output for deeper film bass.
Tip: The angled baffle directs the sound towards the seating, even when the speakers sit low.
Workflow 2: Rear effects in a Dolby Atmos system
Home theatre owners who need compact, discreet surround or rear speakers.
Connections
| Connect | To |
|---|---|
| AV receiver surround or surround back outputs | KIN Flex speakers on wall brackets |
Setup
- Fix the brackets high on the side or rear walls, level, with any in-wall cables exiting through the central opening.
- Screw the bolts into the back of each speaker and hang it on the bracket keyways.
- Mount them upside down near the ceiling for a stealthy yet room-energising option.
- Connect to the receiver's surround outputs with the correct polarity.
- Calibrate distances and levels in the receiver.
Tip: Use wood screws into a stud, or the supplied wall anchors in drywall.
Workflow 3: Vertical LCR on the wall
Rooms where the front speakers should hang on the wall beside and below the TV.
Connections
| Connect | To |
|---|---|
| AV receiver front L / R outputs | Two KIN Flex, vertical, with angled pads |
| AV receiver centre output | One KIN Flex, horizontal, below the TV |
Setup
- Fit the left and right brackets with the keyways pointing down and to the right (vertical mounting).
- Apply the two supplied angled pads to the back of each bracket so the speaker sits parallel to the wall.
- Fit the centre bracket below the TV with the keyways pointing down and to the left (horizontal).
- Hang the speakers and connect them with the equipment switched off.
- Level-match the three channels in the receiver.
Tip: The angled pads improve dispersion when the KIN Flex is the left and right channel of an LCR set-up.
Workflow 4: Compact system with the KIN Amp and KIN Sub
Small rooms and apartments that want big sound from small boxes.
Connections
| Connect | To |
|---|---|
| Phone, TV or other source | KIN Amp |
| KIN Amp speaker outputs | Two KIN Flex |
| KIN Amp subwoofer output | KIN Sub |
Setup
- Place the KIN Flex on a table, in a wall unit or on the wall, 3 - 12 ft (91.44 - 365.76 cm) apart.
- Connect the speakers to the KIN Amp, red to red and black to black.
- Connect the KIN Sub and place it where the bass sounds best.
- Play music at moderate levels for 50 - 100 hours to break the speakers in.
Tip: Totem describes this trio as a system so small that sounds big.
Workflow 5: Stereo in a wall unit or on a table
Music lovers with little space who want the speakers inside furniture.
Connections
| Connect | To |
|---|---|
| Stereo amplifier L / R speaker outputs (20 - 125 W RMS power handling) | Two KIN Flex |
Setup
- Place the speakers horizontally or vertically in the wall unit or on the table, from flush to 2 ft (60.96 cm) from the back.
- Apply the adhesive isolation feet to remove tabletop resonance.
- Sit about 1.5 times the speaker spacing away.
- Connect with the correct polarity and start at low volume.
Tip: The sealed enclosure keeps the sound consistent even inside a cabinet or right against the wall.
Workflow 6: Ceiling-mounted speakers
Rooms where neither floor nor wall space is available, such as kitchens or gaming corners.
Connections
| Connect | To |
|---|---|
| Amplifier or AV receiver speaker outputs | KIN Flex on ceiling brackets |
Setup
- Fix the bracket to the ceiling: wood screws into a joist, or wall anchors and screws into the board.
- Bring the cable through the central bracket opening.
- Screw the bolts into the speaker, connect the cable and hang the speaker on the keyways.
- Aim the angled baffle towards the listening area.
Tip: Turn the volume down at the first sign of distortion: an overdriven amplifier is the most common cause of speaker damage.








