XVIVE U4T Transmitter
MRP - Rs. 12,484
XVIVE U4T transmitter for the U4 in-ear monitor system: backup or extra transmitter, 24-bit / 48 kHz, under 5 ms, 5 hr battery. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
The price shown is the MAXIMUM RETAIL PRICE (MRP), inclusive of all taxes. For the best price, exclusive offers and discounted rates, delivery timelines, or any other information, please DM us or call +91 89818 07755 / +91 91477 00677. We will gladly share an exclusive coupon code that you can apply at checkout. All payments are processed securely through Razorpay, our trusted payment gateway partner.
U4T transmitter
| Connector | XLR, or mono unbalanced 1/4 inch TS with the supplied adapter |
| Input modes | Aux -10 dBV (max. +12.2 dBu); Line +4 dBu (max. +22 dBu) |
| Input impedance | 47 kΩ (1 kHz) |
| Battery | 3.7 V rechargeable Li‑ion, 860 mAh, up to 5 hours, 5 V USB charging |
| Housing | Moulded plastic and cast metal |
| Antenna | 1/4 wave sleeve dipole, non‑removable, 50 Ω (1) |
| Dimensions | 100 x 30 x 28 mm / 3.8 x 1.2 x 1.1 inch |
| Weight | 90 g |
Wireless
| Wireless type | 2.4 GHz ISM worldwide open band |
| Bit depth / sample rate | 24‑bit / 48 kHz |
| Switchable channels | 6 |
| Latency | 5 ms |
| Operating range | 27.5 m / 90 ft (line of sight) |
| RF output power | 10 mW E.I.R.P. max |
Product overview
The XVIVE U4T Transmitter is the transmitter of the U4 In-Ear Monitor Wireless System, sold on its own as a backup transmitter for a U4 system.
It connects to the audio source, typically a mixer or sound interface, and sends audiophile 24-bit / 48 kHz sound with less than 5 ms of latency over industry standard 2.4 GHz wireless to U4 receivers, with a reliable, solid RF connection over 27.5 m (90 ft). It has a balanced XLR input (mono unbalanced 1/4 inch TS with an adapter), an Aux / Line mode switch (-10 dBV / +4 dBu), power and channel switches, channel and power LEDs, and an internal 3.7 V 860 mAh lithium-ion battery for up to 5 hours, charged over USB. The transmitter alone needs U4 receivers for use.
Compatible with
- U4 receivers (U4R) and the receivers of the U4, U4T9, U4R2 and U4R4 systems
In the box
- U4T transmitter
FAQs
Can the U4T replace the transmitter of my U4 system?
Yes. XVIVE offers it as a backup transmitter for a U4 system: set the U4 receivers to its channel.
Does it work on its own?
No. It needs one or more U4 receivers to monitor the signal.
Where can I buy the XVIVE U4T Transmitter in India?
The XVIVE U4T Transmitter is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Backup transmitter on stage
Musicians and engineers who run a U4 system.
Connections
| Connect | To |
|---|---|
| Mixer output | U4T transmitter |
| U4T | U4 receivers on the same channel |
Setup
- Charge the U4T over USB.
- Connect it to the mixer output and set Line or Aux.
- Set the receivers to its channel.
Tip: The power LED turns solid red at 29 % battery.
Workflow 2: A second monitor mix
Bands that need more than one mix.
Connections
| Connect | To |
|---|---|
| Mixer Aux 2 send (via adapter) | U4T transmitter on its own channel |
| Receivers for this mix | Same channel |
Setup
- Feed the U4T from a second Aux send.
- Give it a channel the first transmitter does not use.
- Set the receivers that need this mix to that channel.
Tip: One monitor mix per transmitter, up to 6 at once.
