



ALLEN & HEATH AHM-16
PRICE ON ENQUIRY
Allen & Heath AHM-16 16 x 16 audio matrix processor: 8 x 8 analogue I/O, 128 x 128 I/O Port, 96 kHz FPGA core, AMM, ANC and 4 SoftKeys. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our trusted payment gateway.
General
| Type | Audio matrix processor for sound management and installation |
| Format | 1U rack-mountable |
| Processing matrix | 16 x 16; all inputs to all zones, and zones to other zones |
| Processing core | 96 kHz FPGA |
| Latency | 1 ms max, analogue input to output |
| Sampling rate | 96 kHz ±20 PPM |
Channels and memory
| Input channels | 16, configurable mono or stereo, access to any local or remote input |
| Outputs | 16 configurable processing outputs: mono / stereo zones or speaker processing |
| Zones | Up to 16 mono / 8 stereo, or any combination with speaker processing outputs up to 16 channels |
| Output routing | All output channels routable to any local or remote output |
| Presets | 500, nameable, with a descriptive text entry; crossfade up to 20 s on any combination of inputs, zones, groups and crosspoints |
| Events | 50, nameable; scheduled preset recall at a set time on specific days or every day, repeated or once |
| User profiles | 4, each with an editable name and password |
| Playback | Integrated stereo / split mono playback: WAV, MP3, FLAC |
| Signal generator | Sine (20 Hz - 20 kHz), white noise, pink noise, band-pass noise (sweep) |
Mic/line inputs
| Inputs | 8, balanced, on pluggable terminal blocks |
| Preamp | Fully recallable |
| Phantom power | +48 V |
| Input sensitivity | -60 to +15 dBu |
| Analogue gain | +5 to +60 dB, 1 dB steps |
| Pad | -20 dB active pad |
| Maximum input level | +30 dBu (pad in) |
| Input impedance | > 3 kΩ (pad out), > 8 kΩ (pad in) |
| Mic EIN | -127 dB with 150 Ω source |
Analogue outputs
| Outputs | 8, balanced, relay protected, on pluggable terminal blocks |
| Output impedance | < 75 Ω |
| Nominal output | +4 dBu = 0 dB meter reading |
| Maximum output level | +21 dBu |
| Residual output noise | -92 dBu (muted, 22 Hz - 22 kHz) |
System performance
| Measured | Balanced XLR in to XLR out, 20 Hz - 20 kHz, +5 dB gain, pad out, signal at 0 dB (meter) |
| Dynamic range | 108 dB |
| System signal to noise | -92 dB |
| Frequency response | 20 Hz - 20 kHz, +0 / -0.5 dB |
| THD+N (analogue in to out) | 0.005 % at +16 dBu output, 1 kHz, +5 dB gain |
| Headroom | +18 dB |
| Acoustic noise | Typical loading, 22 °C ambient: 31 dBA without I/O Port card, 33 dBA with I/O Port card |
Input processing
| Trim | ±24 dB digital trim |
| Polarity | Normal / reverse |
| Stereo width control | L/R, R/L, L-Pol/R, R-Pol/L, Mono, L/L, R/R, M/S |
| Gate sidechain | Self-key or source selectable, with 12 dB/octave lo-pass and hi-pass |
| Gate threshold / depth | -72 dBu to +12 dBu / 0 to 60 dB |
| Gate attack / hold / release | 50 µs to 300 ms / 10 ms to 5 s / 10 ms to 1 s |
| Insert | In / out, +4 dBu / -10 dBV level |
| PEQ | 8-band fully parametric, ±15 dB |
| PEQ bands 1 - 8 | Selectable LF / HF shelving, bell (variable or constant Q), hi-pass / lo-pass, notch |
| Bell width | 0.50 - 6.00 Q |
| Shelving type | Classic Baxandall |
| Hi-pass / lo-pass filter | 12 dB/octave |
| Compressor | Peak or RMS sensing; threshold, ratio, attack, release |
| Compressor sidechain | Self-key or source selectable, with 12 dB/octave lo-pass and hi-pass |
| Compressor threshold | -46 dBu to +18 dBu |
| Delay | Up to 683 ms |
Zone processing
| Zones | Up to 16, configurable mono or stereo |
| Source selector | Up to 20 sources, variable level, fade in and fade out time < 20 s |
| Insert | In / out, +4 dBu / -10 dBV level |
| GEQ | 28 bands, 31 Hz - 16 kHz, ±12 dB, constant-Q |
| PEQ / compressor | As input processing |
| Delay | Up to 683 ms |
| ANC ambient level | Selectable source and metering point, gain differential -18 dB to 40 dB |
| ANC gap | Selectable source and metering point, threshold -62 dB to -20 dB, time 0 - 5000 ms |
| ANC gain element | Min / max gain, rate 0 - 30 dB/s |
| Limiter | Variable threshold, attack and release |
Speaker processing
| Crossovers | Configurable 2, 3 or 4-way |
| Filters | Asymmetrical; selectable 1st order, Butterworth 12 / 18 / 24 dB/octave, LR 12 / 24 dB/octave |
| EQ | 4-band fully parametric, or 28-band GEQ; all-pass filters |
| Delay | Up to 683 ms |
| Limiter | As zone processing |
Automatic mic mixing
| Channels | 1 x 16 |
| Modes | D-Classic gain sharing or NOM |
Control and integration
| Front panel | Screen and navigation, 4 programmable SoftKeys |
| Control network | RJ45 port for System Manager, IP remote controllers, Custom Control app and TCP control |
| IP controllers (IP1, IP4, IP8, IP6) | Up to 8, 8, 2, 2 |
| GPIO | 2 inputs (0-10 V analogue control of mutes, levels, preset recall, custom MIDI) and 2 relay outputs (output 1 NC / NO, output 2 NO; respond to mutes, preset recalls, level sensing), on pluggable terminal blocks |
| GPIO expansion | Optional 8 x 8 networkable GPIO interface |
| Third-party control | TCP/IP protocol; drivers for third-party control systems |
| Software | AHM System Manager for a computer; Custom Control app and editor (kiosk and BYOD) |
| Time | NTP support; event scheduler |
Networking and expansion
| I/O Port | One 128 x 128 port for optional digital interface modules |
| Dante option card | Minimum 32 x 32 at 96 kHz, AES67 ready |
| SLink option card | Ethernet audio expansion, multiple Audio-over-Ethernet protocols, up to 128 x 128 I/O; up to 8 remote expanders |
| Other cards | MADI and other network audio cards |
Power
| Mains power | 100-240 V AC, 50/60 Hz, 65 W max; integrated power supply, earthed 3-pin IEC inlet |
| Operating temperature | 0 °C to 40 °C (32 °F to 104 °F) |
Physical
| Dimensions (W x D x H) | 482.6 x 270 x 44 mm (19" x 10.6" x 1.7") |
| Weight | 3.8 kg (8.4 lbs) |
| Boxed | 555 x 405 x 150 mm, 5.45 kg (21.8" x 15.9" x 5.9", 12 lbs) |
Product overview
The Allen & Heath AHM-16 is a 16 x 16 audio matrix processor in a 1U rack chassis, delivering a 16 x 16 matrix with uncompromised processing for single-room applications and smaller multi-room environments such as bars, restaurants, shops and school halls.
AHM-16 is an audio matrix processor for sound management and installation, designed for audio distribution, paging, conferencing and speaker processing. It runs on a 96 kHz FPGA core with ultra-low latency: the system latency from analogue input to output does not exceed 1 ms. The 16 input channels, each configurable mono or stereo, can take any local or remote input, and the routing matrix mixes all inputs to all zones as well as zones to other zones. The 16 outputs are configurable as mono or stereo zones or as speaker processing outputs with 2, 3 or 4-way crossovers, for up to 16 mono or 8 stereo zones, or any combination of zones and speaker outputs up to 16 channels in total.
Every input channel has trim, polarity, a gate, an insert point, 8-band parametric EQ, a compressor, delay and automatic mic mixing. Every zone has a source selector with up to 20 sources, an insert point, 8-band parametric EQ, a 28-band graphic EQ, a compressor, delay, ambient noise compensation (ANC) and a limiter, while speaker processing outputs add crossover filters with selectable type and slope, all-pass filters, EQ, delay and a limiter. The automatic mic mixer handles up to 16 microphones in classic gain sharing mode or as a NOM (number of open microphones) algorithm, and priority ducking, EQ ganging with relative, absolute and mirrored controls and NTP support complete the sound management tools. AHM's fixed architecture lets you apply any and all processing to every input and output, so you never run out of processing, and the AHM System Manager software allows rapid configuration with no certified programming training required.
Locally, AHM-16 has 8 mic/line inputs with fully recallable preamps (+5 to +60 dB of gain, a -20 dB active pad and +48 V phantom power) and 8 balanced, relay-protected line outputs, all on pluggable terminal blocks. One 128 x 128 I/O Port takes an option card for audio networking or expansion: a Dante 96 kHz card (AES67 ready, a minimum of 32 x 32 channels at 96 kHz), MADI, other network audio cards, or an SLink card for plug 'n play connection to up to 8 remote expanders from the Everything I/O range, in wall mount, rack and portable formats.
For everyday users, the front panel screen with navigation keys and 4 programmable SoftKeys gives intuitive volume control, source select, preset recall and more. Across the building, AHM-16 works with IP1, IP6 and IP8 remote controllers over a standard TCP/IP network, CC-7 and CC-10 touch panels, 2 x 2 local GPIO plus a networkable GPIO interface, and the Custom Control app and editor for tailored interfaces with kiosk and BYOD capability. Third-party control systems connect over TCP/IP with pre-built drivers, and updates to the processor are reflected in all connected IP remote controllers and DX expanders through Automatic Firmware Matching. AHM-16 stores 500 presets, 50 scheduled events and 4 user profiles, and has integrated stereo playback.
| Processing matrix | 16 x 16 |
| Local analogue I/O | 8 x 8 |
| I/O Port for audio networking | 128 x 128 |
| Latency, analogue in to out | 1 ms max |
Key features
- 16 x 16 processing matrix with flexible routing and configurable processing on all 16 outputs
- 8 x 8 local analogue I/O: 8 mic/line inputs and 8 relay-protected line outputs on pluggable terminal blocks
- I/O Port for audio networking or expansion, up to 128 x 128: Dante 96 kHz (AES67 ready), MADI, SLink and other network audio cards
- 16 configurable processing outputs: up to 16 mono / 8 stereo zones, or speaker processing
- 96 kHz FPGA core with ultra-low latency, 1 ms max from analogue input to output
- Sound management tools: automatic mic mixer, ANC (ambient noise compensation) and priority ducking
- 8-band PEQ, dynamics and delay on every input and zone, plus a 28-band GEQ on every zone
- Speaker processing with crossover filters, all-pass filters, PEQ, delay and limiter
- EQ ganging (relative, absolute and mirrored controls) and NTP support
- Front panel screen and navigation with 4 programmable SoftKeys
- Compatible with IP1, IP6 and IP8 remote controllers; 2 x 2 local GPIO plus networkable GPIO interface
- TCP/IP protocol and drivers for third-party control systems, System Manager software, Custom Control app and editor for BYOD, 4 user profiles, event scheduler and integrated stereo playback
Made for
- Single-room applications and smaller multi-room environments
- Bars, restaurants and shops
- School halls and education
- Corporate meeting rooms and conferencing
- Hospitality, event and multi-purpose venues
- Retail, theatres, cruise ships and sports venues
- Audio distribution, paging and speaker processing
In the box
- AHM-16 audio matrix processor
- Adhesive feet, packed separately in the box
Connections
- 8 x mic/line inputs, balanced, on pluggable terminal blocks (+48 V phantom power, -20 dB active pad)
- 8 x line outputs, balanced and relay protected, on pluggable terminal blocks (+4 dBu nominal)
- I/O Port: one 128 x 128 slot for an optional audio networking card
- NETWORK: RJ45 control network port for System Manager, IP remote controllers, the Custom Control app and TCP control
- GPIO: 2 general purpose inputs (0-10 V control) and 2 relay outputs on a pluggable terminal block
- AC mains in: earthed 3-pin IEC inlet, 100-240 V AC, integrated power supply
Allen & Heath AHM-16: frequently asked questions
Which AHM model is right for my project?
AHM-16 is designed for single rooms and smaller multi-room spaces: it has 8 x 8 local I/O, a 16 x 16 processing matrix, one automatic mic mixer, 4 SoftKeys and 4 user profiles. The AHM-32 (12 x 12 local I/O, 32 x 32 matrix) and AHM-64 (12 x 12 local I/O, 64 x 64 matrix, built-in SLink) serve larger multi-room and campus installations.
How many microphones can the automatic mic mixer handle?
The AHM-16 automatic mic mixer takes up to 16 microphone sources (1 x 16 channels) and runs in classic gain sharing mode or as a NOM (number of open microphones) algorithm.
Can I add more inputs and outputs?
Yes. Fit an SLink option card in the 128 x 128 I/O Port to connect up to 8 remote expanders from the Everything I/O range, in wall mount, rack and portable formats, or a Dante option card to join a Dante network. All input channels can use any local or remote input, and all outputs can be routed to any local or remote output.
How do people in each room control the system?
With IP1, IP6 or IP8 remote controllers over the network, CC-7 or CC-10 touch panels, the Custom Control app on their own devices, GPIO switches and level controls, or the front panel screen and SoftKeys. They give local volume control, source select, preset recall and more.
Can AHM-16 work with a room control system?
Yes. AHM-16 integrates with third-party devices over GPIO and TCP/IP, with a TCP/IP protocol and pre-built drivers for third-party control systems.
Where can I buy the Allen & Heath AHM-16 in India?
The Allen & Heath AHM-16 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Bar or restaurant with music zones
Integrators fitting out bars and restaurants with background music and local control in each area.
Connections
| Connect | To |
|---|---|
| Music sources and microphones | AHM-16 mic/line inputs 1-8 |
| AHM-16 line outputs | Amplifiers for each zone |
| AHM-16 NETWORK port | PoE network with IP1 or IP6 controllers in each area |
Setup
- Configure the outputs as mono or stereo zones in System Manager, one for each area.
- Add the music sources to each zone's source selector (up to 20 sources, with fade in and fade out).
- Shape each zone with PEQ, the 28-band GEQ, compressor and limiter, and enable ANC where the noise level changes.
- Give each area an IP1 or IP6 controller for local volume, source select and preset recall.
- Use the front panel SoftKeys for quick preset recall at the rack.
Tip: With Automatic Firmware Matching, updates to the processor are reflected in all connected IP remote controllers.
Workflow 2: Shop with paging and scheduled presets
Shops and retail spaces combining background music with announcements.
Connections
| Connect | To |
|---|---|
| Paging microphone | AHM-16 mic/line input (+48 V, -20 dB pad) |
| Music source | AHM-16 input |
| AHM-16 line outputs | Amplifiers for the shop floor zones |
Setup
- Set the paging microphone as the priority source so the music zones duck under announcements.
- Store presets for different times of day: up to 500 nameable presets, with a crossfade of up to 20 s.
- Schedule them with the event scheduler: up to 50 events at a set time on specific days or every day.
- Enable NTP support so the processor keeps network time.
- Wire a switch or a 0-10 V control to the GPIO inputs for mutes, levels or preset recall.
Tip: Events can be triggered repeatedly or just once.
Workflow 3: School hall for assemblies and events
Schools using one hall for speech, music and events.
Connections
| Connect | To |
|---|---|
| Lectern and wireless microphone receivers | AHM-16 mic/line inputs |
| AHM-16 outputs as speaker processing | Amplifiers for the hall speakers |
| AHM-16 front panel | 4 SoftKeys for preset recall |
Setup
- Assign the speech microphones to the automatic mic mixer, in gain sharing or NOM mode.
- Set up the outputs as speaker processing with 2, 3 or 4-way crossovers, delay and limiters.
- Tune the hall with PEQ and all-pass filters on the speaker outputs.
- Store a preset for each type of event and assign the presets to the SoftKeys.
- Create user profiles (up to 4), each with its own name and password.
Tip: The front panel screen and SoftKeys give intuitive volume control, source select and preset recall without a computer.
Workflow 4: Meeting room conferencing
Corporate meeting rooms and boardrooms with several microphones.
Connections
| Connect | To |
|---|---|
| Table microphones | AHM-16 mic/line inputs (+48 V phantom power) |
| AHM-16 line outputs | Room speakers |
| AHM-16 NETWORK port | CC-7 or CC-10 touch panel, Custom Control app or a room control system over TCP/IP |
Setup
- Assign the microphones to the automatic mic mixer (up to 16 sources).
- Shape each microphone with the gate, 8-band PEQ and compressor.
- Add a CC-7 or CC-10 touch panel, or the Custom Control app on users' own devices, for level control and preset recall.
- Connect a room control system over TCP/IP with the AHM protocol or a pre-built driver.
Tip: Custom Control layouts can be tailored to each user and device type, with kiosk and BYOD capability.
Workflow 5: Remote I/O in other rooms over SLink
Installers who need inputs and outputs away from the rack.
Connections
| Connect | To |
|---|---|
| SLink option card in the AHM-16 I/O Port | Up to 8 Everything I/O expanders |
| Wall mount, rack or portable expanders | Microphones, sources and amplifiers in other rooms |
Setup
- Fit an SLink option card in the 128 x 128 I/O Port.
- Connect up to 8 remote expanders from the Everything I/O range, plug 'n play.
- Patch remote inputs to any of the 16 input channels.
- Route zones and speaker outputs to any local or remote output.
Tip: Updates to the processor are reflected in all connected DX expanders through Automatic Firmware Matching.
Workflow 6: Joining a Dante network
Venues that already distribute audio over Dante.
Connections
| Connect | To |
|---|---|
| Dante option card in the AHM-16 I/O Port | Venue Dante network |
| Dante audio expanders from the Everything I/O range | Same Dante network |
| AHM-16 NETWORK port | Computer with AHM System Manager |
Setup
- Fit a Dante 96 kHz option card in the I/O Port: a minimum of 32 x 32 channels at 96 kHz.
- Patch Dante sources to the input channels and send zones to Dante outputs.
- Add Dante expanders where local analogue I/O is needed.
- Configure and monitor the system from System Manager over the control network.
Tip: The Dante option card is AES67 ready.








