ECLER ARQIS108i

Product overview

The ECLER ARQIS108i is a 2-way wooden architectural loudspeaker cabinet with a compact format and stylish aesthetics, featuring 150 W RMS at 8 Ω, a 8 inch woofer and a 1 inch compression driver.

Designed for permanent installation where sound performance and interior design must match, the ARQIS108i covers 65 Hz - 20 kHz (-10 dB) with 130° x 130° (H x V) coverage and reaches 112 dB continuous SPL. The included VEASY wall bracket (VESA compatible) gives pan and tilt adjustment with a single fastening screw. The MDF cabinet has a textured, scratch-resistant finish and an overlapping steel grille with a rotatable logo, in black (RAL 9005) or white (RAL 9003).

Key features

• Full range, 2-way architectural loudspeaker, 150 W RMS at 8 Ω (600 W peak)
• 8 inch woofer and 1 inch compression driver (rotatable)
• 90 dB sensitivity (1 W / 1 m), 112 dB continuous and 118 dB peak maximum SPL
• 130° x 130° (H x V) coverage, crossover at 3.5 kHz
• INPUT: 4-pole locking loudspeaker connector; STACK: Euroblock, with security attachment screws against accidental disconnection
• VEASY wall bracket included (VESA compatible): pan and tilt adjustment, fastened with a single screw
• Metal safety sling included, to avoid drops in case of accidental detachment
• Compatible with the ARQ108UB U-bracket wall mount (not included)
• MDF enclosure with a textured, scratch-resistant finish and an overlapping steel grille with a rotatable logo
• Black (RAL 9005) or white (RAL 9003); ECLER loudspeaker EQ settings and acoustic simulation data files available

Connections

The INPUT is a 4-pole locking loudspeaker connector and the STACK a Euroblock, both with security attachment screws, so loudspeakers can be connected in parallel. Always respect the polarity. ECLER recommends an amplifier of 300 W RMS and a high-pass protection filter at 70 Hz (minimum 12 dB / octave).

Mounting and installation

The VEASY bracket is robust, quick and easy to install, with jumps and markings for repeating the speaker orientation. The rotatable compression driver lets the cabinet work horizontally or vertically. Whenever a bracket is used, add a redundant safety system; a metal safety sling is included.

Design that fits the interior

The square ECLER logo on the grille can be rotated in 90° steps without tools to match the cabinet orientation. ECLER loudspeaker EQ settings and acoustic simulation data files are available.

In the box

• 1 x ARQIS108i loudspeaker
• 1 x VEASY wall bracket with vertical and horizontal adjustment (VESA compatible)
• 1 x Allen key 3 mm
• 1 x Allen key 4 mm
• 1 x Allen key 6 mm
• 2 x Euroblock
• Quick user guide
• Warranty card

Available versions

• ARQIS108i black (RAL 9005): reference CARQIS108IB
• ARQIS108i white (RAL 9003): reference CARQIS108IW

ECLER ARQIS108i: frequently asked questions

What amplifier does the ARQIS108i need?

ECLER recommends 300 W RMS into its 8 Ω nominal impedance, with a high-pass protection filter at 70 Hz (minimum 12 dB / octave).

Can it be installed horizontally and vertically?

Yes. The rotatable compression driver and the mounting options allow both orientations, and the logo rotates in 90° steps.

Is it suitable for outdoor use?

The ARQIS108i is rated IP31 and is designed for permanent indoor installation in commercial, corporate, hospitality, education, sports and leisure spaces.

Which colours are available?

Black (RAL 9005) and white (RAL 9003).

Where can I buy the ECLER ARQIS108i in India?

The ECLER ARQIS108i is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Shop and showroom

Clear music and announcements over a sales floor, matched to the interior.

Connections

Setup

1. Choose black or white to match the walls.
2. Mount each cabinet at an even height over the sales area.
3. Link loudspeakers in parallel from STACK to INPUT, respecting polarity.
4. Check that the total load suits the amplifier channel.

Tip: Keep the line of sight from each cabinet to the audience free of obstacles: high frequencies are very directional.

Workflow 2: Conference room

Speech and presentation audio in corporate rooms.

Connections

Setup

1. Mount the pair at the front of the room, aimed at the seating.
2. Use about 300 W RMS per channel, as ECLER recommends.
3. Set a high-pass filter at 70 Hz (12 dB / octave minimum).
4. Import the ECLER EQ settings for the model and check intelligibility.

Tip: Repeat the same angle on both cabinets using the bracket markings or the same tilt setting.

Workflow 3: Hotel, café and restaurant

Background music that blends into the décor.

Connections

Setup

1. Pick the finish that suits the room.
2. Rotate the grille logo to match the cabinet orientation.
3. Wire and loop the line from cabinet to cabinet.
4. Set comfortable background levels at the amplifier.

Tip: The rotatable logo keeps the brand mark upright whether the cabinet hangs horizontally or vertically.

Workflow 4: Classroom and auditorium

Voice reinforcement and media playback in education spaces.

Connections

Setup

1. Fly the cabinets high enough to cover the back rows.
2. Aim them at the audience area.
3. Add a redundant safety system to every bracket.
4. Test speech level across the room.

Tip: For large audiences, better long-distance coverage is achieved when the cabinets are flown high enough.

Workflow 5: Gym and wellness centre

Energetic music over training floors.

Connections

Setup

1. Mount the cabinets on walls or structure around the floor.
2. Use cables of at least 2.5 mm² up to 10 m (4 or 6 mm² beyond).
3. Keep the amplifier within the recommended power.
4. Raise the level gradually and listen.

Tip: Cross-section in mm² = length in m divided by the loudspeaker impedance in Ω (4 % losses).

Workflow 6: Club and leisure venue

Perimeter reinforcement and zone sound in leisure spaces.

Connections

Setup

1. Place the cabinets around the perimeter of the area.
2. Secure each one with the bracket and a safety sling or chain.
3. Set the high-pass protection filter on the processor or amplifier.
4. Balance the levels between zones.

Tip: Never suspend a cabinet by its handles: use the appropriate mounting accessories.