ECLER NIMBO-14 CR

Product overview

The ECLER NIMBO-14 CR is the RAL customisation version of the NIMBO-14: a premium performance two-way passive loudspeaker of 40 W RMS whose cabinet is painted in the RAL colour chosen for the project, with a black grille and a black bracket.

Suitable for outdoor applications, the NIMBO-14 design is the result of ECLER's engineering skills and the collaboration of architects and interior designers. It combines a 4 inch woofer and a 1 inch silk tweeter located in the acoustic centre, acting as a single point source to disperse the sound evenly over 128° x 196° (H x V). The included HANDY stainless-steel wall bracket allows tilt and pan adjustment using a single screw, with jumps and markings for repeating the speaker orientation. Optional GROUNDY and CEILY brackets place the speaker on the floor or on the ceiling.

Key features

• Two-way passive loudspeaker for surface mounting
• 1 x 4 inch woofer with 4-layer voice coil for power handling and low frequency response
• 1 inch silk tweeter with neodymium magnet and ferrofluid, in the acoustic centre
• Glass-fibre reinforced ABS, non-resonant compact enclosure
• Wide dispersion pattern
• HANDY stainless-steel bracket included, with jumps and markings
• IP44 rated, weather-protected for outdoor applications
• CR version: cabinet in a custom RAL colour, black grille and bracket
• ECLER loudspeaker EQ settings and acoustic simulation data files available

A single point source

The 1 inch silk tweeter sits in the acoustic centre of the woofer, so the drivers act as one point source and spread the sound evenly. The crossover is at 1.65 kHz, sensitivity 81 dB (1 W / 1 m) and maximum SPL 97 dB continuous / 103 dB peak.

Designed with architects

The soft, cloud-inspired cabinet in glass-fibre reinforced ABS carries an aluminium front grille held by a pressure mount system. The CR version has its cabinet painted in a custom RAL colour with a black grille and bracket; the NIMBO-14 is also offered in white, black, gold and titanium colours.

Easy installation

An INPUT Euroblock and a second STACK Euroblock behind the rear cover make parallel connection easy; outdoors, cables enter through rubber grommets from below. The included HANDY stainless-steel wall bracket allows tilt and pan adjustment using a single screw, with jumps and markings for repeating the speaker orientation. Optional GROUNDY and CEILY brackets place the speaker on the floor or on the ceiling.

In the box

• 1 x NIMBO-14 loudspeaker
• 1 x HANDY wall-mount bracket
• 2 x Euroblock connectors
• 1 x First Steps Guide
• 1 x warranty card

Available versions

• NIMBO-14 CR: cabinet in a custom RAL colour, black grille and bracket: reference CNIMBO14CR

ECLER NIMBO-14 CR: frequently asked questions

What is the NIMBO-14 CR?

It is the NIMBO-14 with its cabinet painted in a custom RAL colour, with a black grille and bracket (reference CNIMBO14CR). Acoustics, bracket and specifications are those of the NIMBO-14.

Which amplifier does ECLER recommend?

An amplifier output power of 80 W RMS.

How is it mounted?

The included HANDY stainless-steel wall bracket allows tilt and pan adjustment using a single screw, with jumps and markings for repeating the speaker orientation. Optional GROUNDY and CEILY brackets place the speaker on the floor or on the ceiling.

Where can I buy the ECLER NIMBO-14 CR in India?

The ECLER NIMBO-14 CR is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Hotel terrace and lobby

Elegant sound indoors and on covered terraces.

Connections

Setup

1. Fix the HANDY brackets to the walls.
2. Wire speakers in parallel only as far as the amplifier load allows.
3. Daisy-chain from STACK to INPUT, respecting polarity.
4. Aim each speaker with tilt and pan.

Tip: Outdoors, loop the cable into the rubber grommet from below.

Workflow 2: Restaurant and café

Background music that suits the interior design.

Connections

Setup

1. Order the cabinet in the RAL colour of the project.
2. Mount the speakers above the seating areas.
3. Connect and set the amplifier level.
4. Use the markings to keep every speaker aimed the same way.

Tip: ECLER recommends an amplifier of 80 W RMS.

Workflow 3: Retail store

Music and announcements over the sales floor.

Connections

Setup

1. Space the speakers evenly along the walls.
2. Wire speakers in parallel only as far as the amplifier load allows.
3. Wire them in parallel.
4. Check coverage across the floor.

Tip: Wide 128° x 196° dispersion covers large areas evenly.

Workflow 4: Corporate reception

Discreet, premium sound for receptions and meeting areas.

Connections

Setup

1. Mount the speakers high on the wall.
2. Tilt them towards the listening area.
3. Connect and set the level.
4. Load the ECLER EQ settings file if an ECLER processor is used.

Tip: No obstacles should stand between the speaker and the audience.

Workflow 5: Gym and wellness

Music for training and relaxation areas.

Connections

Setup

1. Install the IP44 rated speakers around the space.
2. Aim them with the bracket.
3. Wire in parallel.
4. Set levels per area.

Tip: Clean only with a soft, dry or slightly damp cloth.

Workflow 6: Garden and pool area

Covered outdoor areas of hotels and homes.

Connections

Setup

1. Mount the speakers under cover.
2. Use round-profile cables through the grommets.
3. Connect and test.
4. Adjust the aim for even coverage.

Tip: Use 4 or 6 mm² cable on runs longer than 10 m.