ECLER NIMBO-24

Product overview

The ECLER NIMBO-24 is a premium performance two-way passive loudspeaker with 80 W RMS power, in a compact size with extended low frequency response and a cloud-inspired design.

Suitable for outdoor applications, the NIMBO-24 design is the result of ECLER's engineering skills and the collaboration of architects and interior designers. It combines two 4 inch woofers and a 1 inch silk tweeter located in the acoustic centre, acting as a single point source to disperse the sound evenly over 165° x 150° (H x V). The nominal impedance can be set to 4 Ω or 16 Ω with the front switch behind the logo, without removing the aluminium grille. The included VEASY stainless-steel wall bracket is VESA 75 compatible and allows tilt and pan adjustment using a single screw, with jumps and markings for repeating the speaker orientation.

Key features

• Two-way passive loudspeaker for surface mounting
• 2 x 4 inch woofers with 4-layer voice coil for power handling and low frequency response
• 1 inch silk tweeter with neodymium magnet and ferrofluid, in the acoustic centre
• Bass reflex port; stack output
• 4 Ω or 16 Ω selected behind the logo, without removing the grille
• Glass-fibre reinforced ABS, non-resonant compact enclosure
• Wide dispersion pattern
• VEASY stainless-steel bracket included, VESA 75 compatible, with jumps and markings
• IP44 rated, weather-protected for outdoor applications
• White, black, gold and titanium colours; RAL paint customisation available
• ECLER loudspeaker EQ settings and acoustic simulation data files available

A single point source

The 1 inch silk tweeter sits in the acoustic centre of the two woofers, so the drivers act as one point source and spread the sound evenly. The crossover is at 1.65 kHz, sensitivity 84 dB (1 W / 1 m) and maximum SPL 103 dB continuous / 109 dB peak.

Designed with architects

The soft, cloud-inspired cabinet in glass-fibre reinforced ABS carries an aluminium front grille held by a pressure mount system. It comes in white, black, gold and titanium colours, and RAL paint customisation is available.

Easy installation

An INPUT Euroblock and a second STACK Euroblock behind the rear cover make parallel connection easy; outdoors, cables enter through rubber grommets from below. The included VEASY stainless-steel wall bracket is VESA 75 compatible and allows tilt and pan adjustment using a single screw, with jumps and markings for repeating the speaker orientation.

In the box

• 1 x NIMBO-24 loudspeaker
• 1 x VEASY wall bracket with vertical and horizontal adjustment (VESA compatible)
• 2 x Euroblock connectors
• 1 x First Steps Guide
• 1 x warranty card

Available versions

• NIMBO-24 white (RAL 9003): reference CNIMBO24WH
• NIMBO-24 black (RAL 9005): reference CNIMBO24BK
• NIMBO-24 gold (RAL 1036, approx.): reference CNIMBO24GD
• NIMBO-24 titanium (RAL 9007 matt): reference CNIMBO24TN

ECLER NIMBO-24: frequently asked questions

Can the NIMBO-24 be used outdoors?

Yes. The cabinet is IP44 rated and suitable for outdoor applications.

Which amplifier does ECLER recommend?

An amplifier output power of 150 W RMS.

How is it mounted?

The included VEASY stainless-steel wall bracket is VESA 75 compatible and allows tilt and pan adjustment using a single screw, with jumps and markings for repeating the speaker orientation.

Can the impedance be changed?

Yes. A two-position switch behind the logo selects 4 Ω or 16 Ω without removing the grille.

Where can I buy the ECLER NIMBO-24 in India?

The ECLER NIMBO-24 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Hotel terrace and lobby

Elegant sound indoors and on covered terraces.

Connections

Setup

1. Fix the VEASY brackets to the walls.
2. Set 4 Ω or 16 Ω behind the logo to suit the number of speakers.
3. Daisy-chain from STACK to INPUT, respecting polarity.
4. Aim each speaker with tilt and pan.

Tip: Outdoors, loop the cable into the rubber grommet from below.

Workflow 2: Restaurant and café

Background music that suits the interior design.

Connections

Setup

1. Choose the finish that matches the walls.
2. Mount the speakers above the seating areas.
3. Connect and set the amplifier level.
4. Use the markings to keep every speaker aimed the same way.

Tip: ECLER recommends an amplifier of 150 W RMS.

Workflow 3: Retail store

Music and announcements over the sales floor.

Connections

Setup

1. Space the speakers evenly along the walls.
2. Set 4 Ω or 16 Ω behind the logo to suit the number of speakers.
3. Wire them in parallel.
4. Check coverage across the floor.

Tip: Wide 165° x 150° dispersion covers large areas evenly.

Workflow 4: Corporate reception

Discreet, premium sound for receptions and meeting areas.

Connections

Setup

1. Mount the speakers high on the wall.
2. Tilt them towards the listening area.
3. Connect and set the level.
4. Load the ECLER EQ settings file if an ECLER processor is used.

Tip: No obstacles should stand between the speaker and the audience.

Workflow 5: Gym and wellness

Music for training and relaxation areas.

Connections

Setup

1. Install the IP44 rated speakers around the space.
2. Aim them with the bracket.
3. Wire in parallel.
4. Set levels per area.

Tip: Clean only with a soft, dry or slightly damp cloth.

Workflow 6: Garden and pool area

Covered outdoor areas of hotels and homes.

Connections

Setup

1. Mount the speakers under cover.
2. Use round-profile cables through the grommets.
3. Connect and test.
4. Adjust the aim for even coverage.

Tip: Use 4 or 6 mm² cable on runs longer than 10 m.