ECLER TUBE SMA

Product overview

The ECLER TUBE SMA is a surface-mount adapter to rail that lets a WiSpeak TUBE or a WiLD-14 loudspeaker be installed where there is no lighting rail, such as on walls or ceilings.

The TUBE SMA is a short section of lighting track on a round base, 100 mm across and 35 mm high. Fix it to the surface, wire mains AC to its L and N terminals, and the TUBE or WiLD-14 inserts and takes its power exactly as on a lighting rail. Pre-drilled holes allow an alternative AC input through corrugated tube. It is available in white and black to match the speaker.

Key features

• Easy surface mounting for the WiSpeak TUBE and the WiLD-14
• Mains wiring to L and N terminals inside the base
• Alternative AC input through pre-drilled holes for corrugated tube
• Rated up to 250 V, 10 A
• White and black finishes

Compatible with

• ECLER WiSpeak TUBE
• ECLER WiLD-14
• Not compatible with the WiSpeak CUBE

In the box

• 1 x TUBE SMA surface-mount adapter

Available versions

• TUBE SMA white: reference CTUBESMAWH
• TUBE SMA black (RAL9005): reference CTUBESMABK

ECLER TUBE SMA: frequently asked questions

Which speakers fit the TUBE SMA?

The WiSpeak TUBE and the WiLD-14. It is not compatible with the WiSpeak CUBE.

Does it need mains power?

Yes. Mount it and connect mains AC to its L and N terminals first, then insert the speaker, which takes its power from the adapter.

Where can I buy the ECLER TUBE SMA in India?

The ECLER TUBE SMA is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: TUBE on a wall

A WiSpeak TUBE where there is no lighting track.

Connections

Setup

1. Fix the TUBE SMA to the wall.
2. Wire mains AC to L and N.
3. Insert the TUBE and lock its safety lug.
4. Select the circuit and pair with the CORE.

Tip: Power the adapter before inserting the speaker.

Workflow 2: WiLD-14 on a ceiling

A WiLD-14 receiver in a room without a track.

Connections

Setup

1. Fix the TUBE SMA to the ceiling.
2. Wire mains AC, using the pre-drilled holes for corrugated tube if needed.
3. Insert the WiLD-14 and select the circuit.
4. Pair with the WiLD-TX.

Tip: Choose the white or black adapter to match the speaker.

Workflow 3: Showroom display wall

Spot sound aimed at a product display.

Connections

Setup

1. Fix the adapter above the display.
2. Wire mains AC to L and N.
3. Insert the TUBE and aim it at the display.
4. Pair with the CORE and set its volume in the app.

Tip: The TUBE swivels to aim the sound once inserted.

Workflow 4: Mixed track and surface install

A shop where part of the ceiling has no track.

Connections

Setup

1. Install TUBEs on the existing track.
2. Fix TUBE SMA adapters where the track ends.
3. Power the adapters and insert the remaining TUBEs.
4. Pair all speakers with one CORE.

Tip: Up to 24 WiSpeak receivers share one CORE.

Workflow 5: Museum corridor with WiLD-14

Long-distance WiLD audio where there is no track.

Connections

Setup

1. Fix adapters along the corridor ceiling.
2. Run mains AC in corrugated tube through the pre-drilled holes.
3. Insert the WiLD-14 speakers.
4. Pair them with the WiLD-TX.

Tip: WiLD receivers can be up to 150 m from the WiLD-TX with line of sight.

Workflow 6: Black finish ceiling

Dark ceilings where a white base would show.

Connections

Setup

1. Order the black adapter (CTUBESMABK).
2. Fix it to the ceiling and wire mains AC.
3. Insert the black speaker.
4. Select the circuit and check the LEDs.

Tip: The TUBE SMA does not fit the WiSpeak CUBE.