ECLER VEO-SPH44

Product overview

The ECLER VEO-SPH44 is a professional 1x4 HDMI distribution amplifier / splitter for high dynamic range (HDR) formats: it shows one Ultra High Definition source on up to four Ultra HD displays at the same time.

It supports an HDMI data rate of up to 18 Gbps with 4K/UHD video at 60 Hz and 4:4:4 chroma sampling, includes EDID management in three modes selected with a front panel switch, and is HDCP 2.2 compliant. Front panel LEDs show power and link status, and the compact metal unit runs from the included 5 V DC international power supply (2 W maximum).

Key features

• Simultaneously displays an Ultra HD source on up to four Ultra HD displays
• Resolutions up to 4096 x 2160 at 60 Hz, YUV 4:4:4
• Three EDID setting modes: Copy, Auto and Mixed
• HDCP 2.2 / 1.4 compliant; 36-bit deep colour
• HDR10 and 3D content; up to 18 Gbps video data rate
• Multichannel audio passed through: PCM 2 ch, LPCM 5.1 and 7.1, and compressed and lossless high-definition surround formats
• Front panel LED indicators for power and signal status
• Firmware upgrade port on the front panel

EDID management in three modes

A three-position switch sets how the splitter handles EDID. Copy: the displays on Out1-3 receive a copy of the EDID negotiated by Out4. Auto: EDID is managed by the VEO-SPH44 itself, following the table in the user manual. Mixed: EDID follows the highest common resolution supported by the display on Out4, to keep all displays compatible. HDR formats are not supported in Auto mode.

HDCP and resolution handling

HDCP version takes priority over EDID: when the source is HDCP 2.2 compliant, 4K at 60 Hz EDID settings are accepted only if the displays are HDCP 2.2 compliant; otherwise the output is set automatically to 1080p at 60 Hz. An HDCP 1.4 4K at 24 Hz source passes at 4K 24 Hz to all displays.

Simple installation

Connect the HDMI source to the input, connect the 4 HDMI outputs to the displays, then power up the VEO-SPH44, the displays and the sources. HDMI cable runs of up to 10 m are supported with ECLER VEO cables.

In the box

• 1 x VEO-SPH44 HDMI distribution amplifier / splitter
• 1 x 5 V DC 1 A international power supply

ECLER VEO-SPH44: frequently asked questions

How many displays can the VEO-SPH44 feed?

Up to four Ultra HD displays from one HDMI source, all showing the same picture.

Which resolutions does it support?

From 480i up to 4096 x 2160 at 60 Hz with 4:4:4 chroma sampling, including 3840 x 2160, 1080p, 1080i and 720p, with HDR10 and 3D content.

What happens with a display that is not HDCP 2.2 compliant?

With an HDCP 2.2 4K source, the output is set automatically to 1080p (HDCP 1.4) so that the display still shows a picture.

How long can the HDMI cables be?

Up to 10 m with ECLER VEO cables.

Where can I buy the ECLER VEO-SPH44 in India?

The ECLER VEO-SPH44 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Shop window displays

Retail shops showing the same promotion on several screens.

Connections

Setup

1. Connect the media player to the HDMI input.
2. Connect each display to an HDMI output.
3. Set the EDID switch to Mixed.
4. Power up the splitter, displays and player.

Tip: Mixed mode keeps every display on a resolution they all support.

Workflow 2: Sports bar screens

Sports bars and restaurants showing one live feed on several TVs.

Connections

Setup

1. Connect the set-top box to the input.
2. Run HDMI cables of up to 10 m to the TVs.
3. Choose Copy or Mixed EDID mode.
4. Power up and check the link LEDs.

Tip: ECLER VEO cables support HDMI runs of up to 10 m.

Workflow 3: Fitness centre video

Gyms and fitness centres with screens over the training areas.

Connections

Setup

1. Connect the source to the input.
2. Connect the wall displays to the outputs.
3. Set the EDID mode.
4. Power up the system.

Tip: Mount the compact unit close to the source to keep cable runs short.

Workflow 4: Hotel lobby and meeting rooms

Hotels showing welcome and information content on more than one screen.

Connections

Setup

1. Connect the signage player.
2. Connect the displays.
3. Use Mixed EDID mode for different display models.
4. Power up and verify the output LEDs.

Tip: With mixed display models, Mixed mode follows the highest common resolution.

Workflow 5: Residential AV

Homes sharing one 4K HDR source between rooms.

Connections

Setup

1. Connect the 4K source.
2. Connect the displays.
3. Use Copy or Mixed mode to keep HDR (not supported in Auto).
4. Power up displays and source.

Tip: HDR passes through in Copy and Mixed EDID modes.

Workflow 6: Mixed HDCP displays

Installers combining an HDCP 2.2 source with older displays.

Connections

Setup

1. Connect the source and the displays.
2. Power up the system.
3. Displays without HDCP 2.2 receive 1080p automatically.
4. Check each display.

Tip: HDCP version takes priority over EDID settings.