ECLER VEO-XPS47
MRP - Rs. 38,900
ECLER VEO-XPS47 4K 60 Hz 18 Gbps HDMI extender kit over one Cat 6 cable up to 70 m, stereo audio out at both ends, IR and PoC. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
The price shown is the MAXIMUM RETAIL PRICE (MRP), inclusive of all taxes. For the best price, exclusive offers and discounted rates, delivery timelines, or any other information, please DM us or call +91 89818 07755 / +91 91477 00677. We will gladly share an exclusive coupon code that you can apply at checkout. All payments are processed securely through Razorpay, our trusted payment gateway partner.
Video
| Transmitter connectors | 1 x HDMI Type A female, 2.0, 18 Gbps; 1 x RJ45 female |
| Receiver connectors | 1 x HDMI Type A female, 2.0, 18 Gbps; 1 x RJ45 female |
| Input and output resolutions | 480i, 480p, 720i, 720p, 1080i, 1080p up to 60 Hz; 1200p up to 25/30 Hz; 4K up to 60 Hz |
| Chroma subsampling | 4:4:4, 4:2:2, 4:2:0 |
| Colour depth | 8‑bit (4K 60 Hz 4:4:4); 10‑bit / 12‑bit (4K 60 Hz 4:2:2 - 4:2:0) |
| Colour space | RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0 |
| HDCP | HDCP 2.2 |
| HDR | HDR10, HDR10+, HLG and other HDR formats |
| HDMI distance | 4K 60 Hz: 5 m with the in/out HDMI cable; 1080p 60 Hz: 15 m |
Audio
| Audio output connectors | 1 x 3‑pin Euroblock (each unit) |
| Audio formats | LPCM 2.0 / 2.1 / 5.1 / 6.1 / 7.1 and compressed and high‑resolution multichannel formats |
| Sample rate | 48, 96 and 192 kHz |
| Bit depth | Up to 24‑bit |
| Frequency response | 20 Hz - 20 kHz (±3 dB) |
Control and connection
| Control connector | 1 x DIP switch |
| EDID management | EDID copy, EDID setting |
| Status indicators | Link status LEDs |
| Pass‑through | IR, 1 x 3.5 mm jack |
| HDMI extension | Point‑to‑point with zero latency |
| Transmission distance | 4K 60 Hz up to 70 m with Cat 6 or higher cable |
Electrical and physical
| Power supply | PoC bidirectional; external, input 100‑240 V AC 50/60 Hz 0.3 A, output 12 V DC 1 A |
| AC mains connector | External PSU; 4 region power blades included |
| DC connector | DC locking |
| Power consumption | 3.36 W |
| Operating | 0 to 40 °C; 20 - 80 % RH, non‑condensing |
| Storage | -20 to 60 °C; 10 - 90 % RH, non‑condensing |
| Installation | Mounting ears for table, wall or screwed |
| Dimensions (W x H x D) | 90 x 18 x 68 mm (transmitter and receiver) |
| Weight | Transmitter 0.160 kg; receiver 0.155 kg |
| Shipping dimensions (W x H x D) | 215 x 75 x 135 mm |
| Shipping weight | 0.7 kg |
| Chassis | Metal, black |
| Reference | CVEOXPS47 |
Product overview
The ECLER VEO-XPS47 is an HDMI 18 Gbps extender kit that extends 4K 60 Hz 4:4:4 video up to 70 metres with zero latency over a single Cat 6 or higher cable.
It features stereo unbalanced audio extraction through Euroblock connectors on both the transmitter and the receiver, EDID management, bidirectional IR pass-through and bidirectional power over cable (PoC): one power supply at either end runs both units. A simple solution for professional extension in education, corporate and hospitality projects.
| 4K 60 Hz over Cat 6 | 70 m |
| HDMI 2.0b, 4:4:4 | 18 Gbps |
| compliant | HDCP 2.2 |
| bidirectional power | PoC |
Key features
- Transmitter and receiver set for extension over a single Cat 5e or higher cable
- HDMI 18 Gbps 4K 60 Hz 4:4:4 as specified in HDMI 2.0b
- 4K 60 Hz transmission up to 70 m over Cat 6 or higher cable
- Stereo unbalanced audio extraction on Euroblock at the transmitter and at the receiver
- HDR10, HDR10+, HLG and other HDR formats
- LPCM 7.1 and high-resolution multichannel audio formats
- Bidirectional IR control extension
- EDID management (copy and setting)
- HDCP 2.2 compliant
- Bidirectional PoC function
Transmitter
EDID switch (right: copy the HDMI loop out display EDID; left: copy the receiver display EDID), Micro-USB SERVICE port for firmware upgrade and user-defined EDID upload, AUDIO OUT, HDMI IN, CAT OUT, IR IN and IR OUT (3.5 mm jacks) and the DC 12 V input.
Receiver
SERVICE port, HDMI OUT to the display, AUDIO OUT, CAT IN, IR IN, IR OUT and the DC 12 V input.
Bidirectional power and IR
Only one of the two units needs to be plugged into the mains: connect the 12 V DC supply to the transmitter or to the receiver and both work, sharing power over the same Cat 5e (or higher) cable. IR control travels in both directions with the included IR receiver and IR blaster cables.
In the box
- 1 x transmitter unit
- 1 x receiver unit
- 1 x IR receiver cable (1.5 m)
- 1 x IR blaster cable (1.5 m)
- 2 x 3-pin Euroblock connectors
- 4 x mounting ears
- 8 x mounting screws
- 1 x USB 2.0 cable
- 1 x 12 V 1 A power supply
ECLER VEO-XPS47: frequently asked questions
How far can it send 4K?
4K 60 Hz up to 70 m over Cat 6 or higher cable, with zero latency, point to point.
Can I take audio out for an amplifier?
Yes. Both the transmitter and the receiver have a stereo unbalanced AUDIO OUT on a 3-pin Euroblock connector.
Do both units need power?
No. Thanks to bidirectional PoC, one 12 V DC supply on either unit powers both.
Does it support HDR and HDCP 2.2?
Yes. It supports HDR10, HDR10+, HLG and other HDR formats, and is HDCP 2.2 compliant.
Where can I buy the ECLER VEO-XPS47 in India?
The ECLER VEO-XPS47 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Classroom projector with room audio
Schools sending a lectern source to a ceiling projector.
Connections
| Connect | To |
|---|---|
| Lectern source HDMI | Transmitter IN |
| Transmitter CAT OUT | Receiver CAT IN (Cat 6, up to 70 m) |
| Receiver OUT | Projector |
| Receiver AUDIO OUT | Room amplifier |
Setup
- Mount the transmitter at the lectern with the mounting ears.
- Run shielded Cat 6 to the projector position.
- Connect the projector and wire the amplifier to the receiver Euroblock.
- Power either unit and check picture and sound.
Tip: One power supply at either end runs both units.
Workflow 2: Boardroom display far from the rack
Corporate rooms with the source in a rack.
Connections
| Connect | To |
|---|---|
| Rack source | Transmitter IN |
| Transmitter AUDIO OUT | Rack amplifier |
| Receiver OUT | Boardroom display |
Setup
- Connect the source to the transmitter.
- Take stereo audio from the transmitter Euroblock to the rack amplifier.
- Connect the display to the receiver.
- Set the EDID switch for the display.
Tip: Audio can be extracted at the transmitter, the receiver or both.
Workflow 3: Hotel bar screen with remote control
Bars that change channels on a hidden set-top box.
Connections
| Connect | To |
|---|---|
| IR receiver cable | Receiver IR IN |
| IR blaster cable | Transmitter IR OUT |
| IR blaster | Set‑top box IR window |
Setup
- Connect the IR receiver at the display end.
- Connect the IR blaster at the source end.
- Point the blaster at the box.
- Use the remote at the screen.
Tip: IR extension works in both directions.
Workflow 4: Power at the display end only
Sites where the only socket is behind the display.
Connections
| Connect | To |
|---|---|
| 12 V DC supply | Receiver DC 12V |
| Cat 6 cable | Powers the transmitter (PoC) |
Setup
- Connect the power supply to the receiver.
- Connect the Cat cable between the units.
- Check the link status LEDs on both units.
- Connect the source and display.
Tip: Only one unit needs to be plugged into the mains.
Workflow 5: Restaurant sound and screen
Restaurants feeding a screen and a local sound system.
Connections
| Connect | To |
|---|---|
| Media player | Transmitter IN |
| Receiver OUT | Display |
| Receiver AUDIO OUT | Zone amplifier |
Setup
- Install the units with the mounting ears.
- Connect the player and the display.
- Wire the zone amplifier to the receiver Euroblock.
- Set the level on the amplifier.
Tip: The included 3-pin Euroblock connectors terminate the audio cables.
Workflow 6: Custom EDID for a projector
Installations that need a fixed EDID.
Connections
| Connect | To |
|---|---|
| Computer USB | SERVICE port (Micro‑USB) |
| Transmitter | Source |
Setup
- Connect the included USB 2.0 cable to the SERVICE port.
- Upload the user-defined EDID.
- Reconnect the source.
- Check the resolution on the display.
Tip: The SERVICE port also handles firmware upgrades.
