ECLER WiLD-14

Product overview

The ECLER WiLD-14 is a self-powered 4 inch lamp-style loudspeaker with wireless WiLD audio reception, designed to mount on a ceiling lighting rail and take its power from the rail: no audio cable and no separate power cable.

WiLD is ECLER's long-distance wireless audio solution for retail spaces, museums and other markets. Each WiLD-14 receives the signal of a paired WiLD-TX transmitter from up to 150 m away (direct line of sight) and plays it through a 4 inch woofer and a 0.75 inch tweeter driven by 40 W RMS of built-in amplification. A universal internal power supply takes 100 - 240 V AC from the lighting rail bracket, the swivel mount aims the sound like a spotlight, and the speaker comes in white (RAL9003) or black (RAL9005).

Key features

• Lamp-style self-powered WiLD receiver with a 4 inch woofer and a 0.75 inch tweeter
• 40 W RMS / 160 W peak built-in amplification
• Lighting rail mount for 4-wire, 3-circuit track systems, with a circuit selector
• Universal internal power supply: 100 - 240 V AC, 50 - 60 Hz from the rail bracket
• Wireless WiLD audio from a paired WiLD-TX, up to 150 m with direct line of sight
• Rear WiLD PAIR button and status LED; USB-C port for service and firmware
• Swivel pan and tilt to aim the sound
• Surface mounting with the optional TUBE SMA accessory
• Available in white (RAL9003) and black (RAL9005)

Sound on the lighting track

The WiLD-14 arrives with the lighting rail bracket already fitted. Set the circuit selector to OFF, insert the speaker in the rail, lock the safety lug and turn the selector to the circuit that carries mains power. The status LED confirms power, and the speaker can be aimed on both axes. Where there is no rail, the optional TUBE SMA surface mount takes its place.

Wireless, paired in seconds

Press WiLD PAIR on the WiLD-TX, then on each WiLD-14; pairing takes up to 60 seconds. When the LED stays lit, the speaker plays the transmitted signal. Up to 32 receivers, WiLD-14 speakers and WiLD-SB18 subwoofers, share one transmitter, which sets the source, tone and master volume of the whole installation.

Even, wide coverage

With an effective range of 63 Hz to 20 kHz (-10 dB), 86 dB sensitivity and up to 102 dB continuous / 108 dB peak SPL, the WiLD-14 covers shop floors, galleries and lobbies with a 320° coverage angle, while the ABS enclosure and metal grille keep it discreet.

In the box

• 1 x WiLD-14 unit
• 1 x lighting rail mount (fitted)
• First Steps Guide
• Warranty card

Available versions

• WiLD-14 white (RAL9003): reference CWILD14WH
• WiLD-14 black (RAL9005): reference CWILD14BK

ECLER WiLD-14: frequently asked questions

Does the WiLD-14 need an audio cable?

No. It receives audio wirelessly from a paired WiLD-TX transmitter, up to 150 m away with direct line of sight.

How is it powered?

From the lighting rail: its universal internal power supply takes 100 - 240 V AC from the rail bracket.

Can it be installed without a lighting rail?

Yes, with the optional TUBE SMA surface mount accessory, which is powered with mains AC.

Which colours are available?

White (RAL9003, reference CWILD14WH) and black (RAL9005, reference CWILD14BK).

Where can I buy the ECLER WiLD-14 in India?

The ECLER WiLD-14 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Fashion store on a lighting track

A shop that already has a 3-circuit lighting track.

Connections

Setup

1. Set each speaker's circuit selector to OFF.
2. Insert the speakers in the track and lock the safety lugs.
3. Select the powered circuit and check the LEDs.
4. Pair the speakers with the WiLD-TX and aim them.

Tip: Pair the speakers near the transmitter first, then fit them on the track.

Workflow 2: Museum gallery

Ambient sound or narration without visible cabling.

Connections

Setup

1. Mount the speakers on the gallery lighting track.
2. Pair them with the WiLD-TX.
3. Aim each speaker at its exhibit area.
4. Set the master volume on the WiLD-TX.

Tip: Keep within 150 m with a clear line of sight to the transmitter.

Workflow 3: Café or restaurant

Background music that looks like the lighting.

Connections

Setup

1. Choose black or white to match the track lights.
2. Fit the speakers on the track.
3. Pair them with the WiLD-TX.
4. Play music over Bluetooth.

Tip: Add a WiLD-SB18 subwoofer to the same network for more bass.

Workflow 4: Showroom without a rail

Spaces with no lighting track.

Connections

Setup

1. Mount and power the TUBE SMA on the ceiling or wall.
2. Insert the WiLD-14 and lock it.
3. Set the circuit selector and check the LED.
4. Pair with the WiLD-TX.

Tip: The TUBE SMA must be powered with mains AC before the speaker is inserted.

Workflow 5: Hotel lobby

Music across a large lobby.

Connections

Setup

1. Plan speaker positions on the existing tracks.
2. Install and pair all speakers.
3. Set the tone on the WiLD-TX.
4. Walk the space and re-aim speakers where needed.

Tip: Mirrors and metal interfere most with the wireless link.

Workflow 6: Seasonal store layout changes

Shops that move displays often.

Connections

Setup

1. Set the selector to OFF before removing a speaker.
2. Detach it from the track.
3. Fit it in the new position and select the circuit.
4. It reconnects to its paired transmitter.

Tip: Always switch the selector to OFF before detaching the speaker.