ECLER WiLD-TX

Product overview

The ECLER WiLD-TX is the master transmitter of the WiLD long-distance wireless audio system: it pairs with up to 32 WiLD receivers and sends them uncompressed 16 bit / 48 kHz audio over up to 150 m, with direct line of sight.

WiLD is ECLER's long-distance wireless audio solution for retail spaces, museums and other markets: a cost-effective, robust and user-friendly installation with minimal visual impact. The WiLD-TX takes a stereo RCA line source or a Bluetooth source, adds 3-band tone control and master volume, and transmits a mono conversion of the selected input to every paired WiLD-14 loudspeaker and WiLD-SB18 subwoofer. It also manages the global configuration of the system, offers an external MUTE input and a REMOTE port for a WPaVOL wall panel, and runs from a 5 V USB-C supply.

Key features

• Master unit of a WiLD network: pairs and feeds up to 32 WiLD-14 and WiLD-SB18 receivers
• 1880 - 1930 MHz DECT-band wireless audio (EU DECT, US DECT)
• Up to 150 m recommended range to any paired receiver, direct line of sight
• Two inputs: stereo unbalanced 2 x RCA and Bluetooth
• Front panel 3-band EQ (bass, mid, treble) and master volume
• WiLD PAIR button on the rear for quick pairing of the receivers
• EXT. MUTE dry-contact input and REMOTE port for a WPaVOL volume panel
• USB-C 5 V DC power from the supplied universal power supply, also used for firmware updates
• Flexible mounting: table, wall, under a surface or 1U in a 19 inch rack (accessories included)

One transmitter, a whole venue

Each WiLD-TX has two DECT antennas that transmit audio on the working channel, while a handover algorithm continuously moves the carrier to keep the best link quality. Place the transmitter as centred as possible in the receivers' network, at up to 2 m height, and keep within 150 m of every receiver with no obstacles in between for the most stable connection.

Simple pairing

Press WiLD PAIR on the transmitter, then on each receiver; press it again on the transmitter to finish. The status LED stays lit when the network is established. Pairing is cumulative, so receivers can be added, removed or replaced later. Bluetooth sources pair with a short press of BT PAIR on the front panel.

Installs anywhere

The metal enclosure sits on a table, mounts on a wall or under a shelf with the supplied ears and bracket, or fits 1U of a 19 inch rack with the half rack front adapter. Forced ventilation is not required.

In the box

• 1 x WiLD-TX unit
• 1 x external universal power supply
• 2 x DECT antennas
• 1 x Bluetooth antenna
• 1 x half rack front adapter
• 2 x mounting ears
• 1 x wall-mount bracket
• 1 x Euroblock connector (mute)
• First Steps Guide
• Warranty card

Available versions

• WiLD-TX black (RAL9005): reference CWILDTX

ECLER WiLD-TX: frequently asked questions

How many speakers can one WiLD-TX feed?

One WiLD-TX controls up to 32 WiLD receivers (WiLD-14 loudspeakers and WiLD-SB18 subwoofers).

What range does it cover?

ECLER recommends a maximum of 150 m from the transmitter to any paired receiver, with direct line of sight.

Which sources can I connect?

A stereo line source on the 2 x RCA input, or a phone, tablet or computer over Bluetooth. A front switch selects the source.

Can the end user control the volume from a wall?

Yes. The REMOTE port accepts a WPaVOL analogue volume panel, and the EXT. MUTE input silences the system from an external dry contact.

Where can I buy the ECLER WiLD-TX in India?

The ECLER WiLD-TX is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Retail store background music

A shop that needs music across the floor without running speaker cables.

Connections

Setup

1. Place the WiLD-TX centrally, no higher than 2 m.
2. Pair each WiLD-14 with the WiLD PAIR buttons.
3. Select LINE with the input switch.
4. Set the master volume and tone for the whole shop.

Tip: Pair the receivers close to the transmitter, then move them to their final place.

Workflow 2: Museum gallery

Ambient sound in galleries where cabling is not allowed.

Connections

Setup

1. Plan receiver positions within 150 m, line of sight.
2. Pair all receivers in one session.
3. Adjust bass, mid and treble for the room.
4. Check the status LED is lit steadily.

Tip: Concrete, metal and mirrors interfere most: keep a clear line of sight.

Workflow 3: Café with Bluetooth music

Staff play music from a phone.

Connections

Setup

1. Short press BT PAIR on the front panel.
2. Select the device named Wild-Tx on the phone.
3. Move the input switch to BT.
4. Set the master volume.

Tip: Hold BT PAIR for more than 5 seconds to reset the Bluetooth connection.

Workflow 4: Rack installation

A tidy install in an equipment rack.

Connections

Setup

1. Remove the 2 side screws.
2. Fit the half rack front adapter with the same screws.
3. Mount 1U in the 19 inch rack.
4. Fit the 3 antennas.

Tip: Forced ventilation is not required, but avoid extreme temperatures.

Workflow 5: Wall volume control

Let the end user set the level from a wall panel.

Connections

Setup

1. Wire the WPaVOL to the REMOTE port.
2. Wire a dry contact to EXT. MUTE if needed.
3. Set the maximum level on the WiLD-TX.
4. Test the wall panel.

Tip: EXT. MUTE silences the whole system when the external contact closes.

Workflow 6: Gym and wellness area

Music with bass from a wireless subwoofer.

Connections

Setup

1. Install the receivers where needed.
2. Pair the WiLD-14 speakers and the WiLD-SB18.
3. Set the tone controls for the music.
4. Add receivers later by pairing again.

Tip: Pairing is cumulative: new receivers join without re-pairing the others.