ECLER WPaVOL-SRUS
PRICE ON ENQUIRY
ECLER WPaVOL-SRUS remote wall panel: volume and source selection, US format, 0-10 V DC, RJ45. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please DM us or call +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our trusted payment gateway partner.
Function
| Type | Remote wall panel control for one volume and source or preset selection (US model) |
| Format | Single‑gang US format, compatible with US electrical box |
| Controls | LEVEL + SELECT (0, 1‑4) |
| Connector | RJ45 |
| Control | 0‑10 V DC REMOTE ports |
Connections
| RJ45 pin 2 | REMOTE VOL (10 V → 0 V = minimum → maximum) |
| RJ45 pin 6 | VCC +12 V / +10 V |
| RJ45 pins 1, 3, 7 | GND |
| RJ45 pins 4, 5 | Not connected |
| RJ45 pin 8 | REMOTE ZONE (0, 3, 5, 7, 10 V → OFF, Z1, Z2, Z3, Z4) |
Physical
| Finish | White (RAL 9016) |
| Enclosure material | ABS |
| Dimensions (W x H x D) | 116.5 x 114.8 x 31.3 mm |
| Weight | 0.14 kg |
| Operating temperature | -10 °C to 40 °C |
| Operating humidity | < 85 % RH |
| Storage temperature | -10 °C to 40 °C |
| Storage humidity | < 90 % RH |
| Shipping dimensions (W x H x D) | 120 x 210 x 80 mm |
| Shipping weight | 0.27 kg |
| Included accessories | Surface‑mount installation box |
| Reference | CWPAVOLSRUS |
Product overview
The ECLER WPaVOL-SRUS is a remote wall panel control for one volume management and source or preset selection, made in the standard format of the WPa series for US electrical boxes. It works with every ECLER device that has a 0-10 V DC REMOTE control port, such as the NXA series, GPA series, MIMO88, MPA-R, ALMA and CA series, and connects over one RJ45 cable. The WPa series has a modern, elegant and discreet design, and a surface-mount installation box is included.
WPa is ECLER's series of remote control wall panels for systems and for interconnecting audio signals, with a modern, elegant and discreet design in white (RAL 9016). Every panel of the series comes with a surface-mount installation box, and a magnetic frame holds the front plate in place.
| Remote volume control | LEVEL |
| Source or preset, 0 + 4 positions | SELECT |
| Fits US electrical boxes | US format |
| Weight | 0.14 kg |
Key features
- LEVEL knob for remote volume control (0-10 V DC)
- SELECT knob for source or preset selection: 0 (off) and positions 1 to 4
- RJ45 connection for control voltage and power
- US format, compatible with US electrical boxes
- Surface-mount installation box included
Works with ECLER REMOTE ports
The WPaVOL-SRUS sends a 0-10 V DC control voltage over a standard RJ45 cable: pin 2 carries the remote volume (10 V = minimum, 0 V = maximum) and pin 6 the +10 V / +12 V supply from the controlled device. It is compatible with ECLER devices that have a 0-10 V DC REMOTE port, such as the NXA series, GPA series, MIMO88, MPA-R, ALMA and CA series.
Source or preset selection
The SELECT knob has an off position (0) and positions 1 to 4. Pin 8 of the RJ45 sends 0, 3, 5, 7 or 10 V, which the ECLER device reads as OFF, Z1, Z2, Z3 or Z4 to change the source or recall a preset.
Made for US electrical boxes
The WPaVOL-SRUS keeps the standard WPa look in the US format (116.5 x 114.8 x 31.3 mm) and fits US electrical boxes.
In the box
- 1 x WPaVOL-SRUS wall panel
- 1 x surface-mount installation box
ECLER WPaVOL-SRUS: frequently asked questions
Which ECLER devices work with the WPaVOL-SRUS?
Any ECLER device with a 0-10 V DC REMOTE port, such as the NXA series, GPA series, MIMO88, MPA-R, ALMA and CA series.
What cable does it use?
A standard RJ45 network cable, wired as in the connection diagram (pins 2, 6 and a GND pin, plus pin 8 for selection).
How many sources or presets can be selected?
Four: SELECT positions 1 to 4, plus 0 for off.
What size is it?
116.5 x 114.8 x 31.3 mm, 0.14 kg.
Where can I buy the ECLER WPaVOL-SRUS in India?
The ECLER WPaVOL-SRUS is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Zone volume in a shop
Retail spaces that want staff to set the music level at the wall.
Connections
| Connect | To |
|---|---|
| WPaVOL‑SRUS RJ45 | 0‑10 V DC REMOTE port of the ECLER amplifier or matrix |
Setup
- Run a network cable from the panel to the REMOTE port.
- Wire pin 2 (remote volume), pin 6 (VCC) and a GND pin as in the connection diagram.
- Turn LEVEL and check the zone volume follows.
Tip: Turning LEVEL fully clockwise gives maximum volume (0 V on pin 2).
Workflow 2: Meeting room level control
Corporate rooms with their own speaker zone.
Connections
| Connect | To |
|---|---|
| WPaVOL‑SRUS | REMOTE input of the zone amplifier |
Setup
- Mount the panel by the door.
- Connect it to the REMOTE port of the zone.
- Set the maximum level on the amplifier, then hand control to the panel.
Tip: One panel controls one volume.
Workflow 3: Restaurant and bar music
Leisure venues where the level changes through the day.
Connections
| Connect | To |
|---|---|
| WPaVOL‑SRUS | ECLER amplifier REMOTE port |
Setup
- Install the panel where staff can reach it.
- Connect the RJ45 cable.
- Adjust LEVEL during service.
Tip: The discreet white panel suits most interiors.
Workflow 4: US electrical boxes
Projects that use US format back boxes.
Connections
| Connect | To |
|---|---|
| WPaVOL‑SRUS | US electrical box |
Setup
- Fit the panel to a US electrical box.
- Connect the RJ45 cable to the REMOTE port.
- Test the LEVEL control.
Tip: The WPaVOL-SRUS keeps the WPa look in the US format.
Workflow 5: Source or preset selection
Zones that choose between music sources or presets.
Connections
| Connect | To |
|---|---|
| WPaVOL‑SRUS RJ45 pin 8 | Second REMOTE / GPI input of the ECLER device |
Setup
- Wire pin 8 (REMOTE ZONE) and a GND pin to the selection input.
- Assign positions 1 to 4 to sources or presets in the device.
- Turn SELECT: 0 = off, 1 to 4 = the chosen source.
Tip: Pin 8 sends 0, 3, 5, 7 or 10 V for OFF and Z1 to Z4.
Workflow 6: Mounting the panel
Installers fitting the panel to a wall.
Connections
| Connect | To |
|---|---|
| Surface‑mount box | Wall |
Setup
- Fix the surface-mount box (or an in-wall box) where the panel is needed.
- Wire the cable to the screw terminals of module B; no soldering is needed.
- Screw module B into the box, then fit the magnetic frame C.
- Press the front plate A into place with care: the frame magnets exert considerable force.
Tip: The surface-mount box is included.
