FONESTAR AIP-1020

Product overview

The FONESTAR AIP-1020 is the microphone of the FONESTAR AIP audio over IP system, with a capacitive touch keypad of 12 configurable buttons for easy microphone paging and message playback.

The AIP-1020 streams its audio over the local area network (LAN). It has 2 integrated microphones and a balanced XLR input for the optional MICFLEX-C45-B gooseneck microphone, an RJ-11 link for extension, a 3.5 mm headphone output and a USB port for software updates. It is configured from the PC with the AIP-GO software, which detects it automatically, and it is powered by the included 12 V DC adapter.

Key features

• IP audio system microphone for the AIP system
• Capacitive touch keypad with 12 configurable buttons
• 2 integrated microphones
• Paging via the microphone and pre-recorded message playback
• Balanced microphone input, XLR, 600 Ω, 5 mV, compatible with the MICFLEX-C45-B gooseneck
• RJ-11 link for extension and 3.5 mm headphone output
• Audio streaming via the local area network, RJ-45
• PC configuration and USB port for software updates
• 12 V DC, 1.5 A power adapter included

A keypad made for paging

The capacitive touch keypad has 12 configurable buttons: numbered buttons 1 to 8, a TALK button and 4 further buttons. The function of every button is set from the PC, so the same desk unit can page different areas or start pre-recorded messages with a single touch.

Integrated microphones or a gooseneck

Two integrated microphones let the AIP-1020 page as it is. For a classic paging station, the optional MICFLEX-C45-B, a cardioid electret condenser gooseneck microphone made for the AIP-1020, plugs into the balanced XLR input.

Part of a scalable system

AIP is a 100% scalable solution, with no limit to the number of AIP devices and channels, an auto-discovery service when devices are connected to the network and intuitive configuration and control software. The AIP-1020 works with the AIP-GATE channel programmer, AIP-STREAMER transmitter, AIP-PLAYER player and AIP-SPL sound pressure sensor.

In the box

• AIP-1020 IP microphone
• 12 V DC, 1.5 A power adapter

FONESTAR AIP-1020: frequently asked questions

Does the AIP-1020 need a gooseneck microphone?

No. It has 2 integrated microphones. The optional MICFLEX-C45-B gooseneck can be added on the XLR input.

How many buttons does it have?

12 configurable buttons on a capacitive touch keypad, for paging and pre-recorded message playback.

How does it connect to the system?

Through its RJ-45 Ethernet port: the audio is streamed over the local area network and AIP-GO detects the microphone automatically.

How is it powered?

With the included 12 V DC, 1.5 A power adapter.

Where can I buy the FONESTAR AIP-1020 in India?

The FONESTAR AIP-1020 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Reception paging station

Hotel or office reception calling different areas.

Connections

Setup

1. Connect the microphone to the LAN and power it.
2. Let AIP-GO detect it.
3. Assign the buttons to the areas of the building.
4. Press the button of the area and page.

Tip: Add the MICFLEX-C45-B gooseneck for a classic paging position.

Workflow 2: School office announcements

Announcements to classrooms and corridors.

Connections

Setup

1. Install the microphone on the office desk.
2. Configure buttons for each building.
3. Configure a button for an all-call.
4. Test announcements in every zone.

Tip: Pre-recorded messages can be started from the keypad.

Workflow 3: Supermarket messages

Staff calls and promotional messages.

Connections

Setup

1. Assign message buttons in AIP-GO.
2. Assign paging buttons for the sales floor and the warehouse.
3. Train staff on the keypad.
4. Check levels in every zone.

Tip: Combine with the AIP-SPL so messages rise above the ambient noise.

Workflow 4: Factory control room

Calls to production areas.

Connections

Setup

1. Fit the MICFLEX-C45-B to the XLR input.
2. Assign the buttons to production zones.
3. Monitor with headphones on the 3.5 mm output.
4. Page the zones as needed.

Tip: The headphone output helps in noisy rooms.

Workflow 5: Extension of the paging station

Installations that need the link connection.

Connections

Setup

1. Connect the extension through the RJ-11 link.
2. Configure the units in AIP-GO.
3. Test paging from each position.
4. Document the button functions.

Tip: The RJ-11 link is the official extension connection of the AIP-1020.

Workflow 6: Firmware maintenance

Keeping the microphone up to date.

Connections

Setup

1. Run AIP-GO.
2. Accept the update notification for the microphone.
3. Or copy the update to a USB storage device and insert it into the side of the unit.
4. Switch the unit on to update.

Tip: Firmware files for the AIP-1020 carry the MIC device identifier.