FONESTAR LIGNUM-6

Product overview

The FONESTAR LIGNUM-6 is a compact passive high-power full-range loudspeaker: a 6 inch two-way coaxial system with 120 W RMS (480 W peak) at 8 Ω in a birch plywood enclosure with polyurea coating.

Designed for professional installations requiring controlled coverage and high performance in a compact format, the LIGNUM-6 combines a 6 inch pressed paper fibre woofer with a 1 inch silk dome tweeter with a neodymium magnet. Its 92 dB sensitivity gives considerable volume with lower energy consumption, a high maximum SPL keeps the sound clear and powerful in challenging environments, and good headroom with low distortion ensures remarkable fidelity. The controlled 105° H x 110° V dispersion directs acoustic energy where it is needed across 90 to 20,000 Hz, and the wall bracket is included.

Key features

• Two-way coaxial design for a consistent and natural sound response
• 6 inch woofer (pressed paper fibre cone) and 1 inch silk dome tweeter with neodymium magnet
• 120 W RMS, 480 W peak, 8 Ω impedance
• 92 dB sensitivity, 113 dB continuous / 119 dB peak SPL
• Birch plywood enclosure with sprayed polyurea coating and built-in bass reflex
• Steel grille with acoustic foam and powder-coated finish
• 4-pin safety Euroblock (2 in, 2 out) for daisy-chained installations
• Wall mount included, 3/8 inch microphone stand adapter, 4 x M6 wall points, 3 x M8 rigging and safety points

Acoustics

The coaxial woofer and tweeter share one axis for a natural response, with an optimised 2,750 Hz crossover. A hyperbolic bass reflex extends the low frequencies without resonances, and the high-efficiency drivers keep the format compact.

Design and durability

Soft curves against the cubic design and rear brackets with low visual impact allow discreet architectural integration. High-strength birch plywood is protected by heavy-duty polyurea, and the perforated steel grille has a thick powder coating and a protective inner mesh. It operates from -20 °C to +60 °C.

Installation

Mount it on the included vertically and horizontally adjustable wall bracket, on a microphone stand with the 3/8 inch adapter, suspended from the 3 x M8 rigging points, or on a surface; the M8 points also serve for safety anchoring. The safety Euroblock input and output loop the signal to the next loudspeaker.

In the box

• LIGNUM-6 loudspeaker
• Wall mount

FONESTAR LIGNUM-6: frequently asked questions

What is the impedance of the LIGNUM-6?

8 Ω, rated 120 W RMS and 480 W peak, for low impedance installations.

Is a wall bracket included?

Yes. The wall mount is included; it adjusts vertically and horizontally and locks with a screw.

Can it be used on a stand?

Yes. It has a 3/8 inch microphone stand adapter.

Where is it recommended?

FONESTAR recommends it for hospitality, retail, sports facilities and hotels.

Where can I buy the FONESTAR LIGNUM-6 in India?

The FONESTAR LIGNUM-6 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Restaurant

Clear music over dining areas.

Connections

Setup

1. Fix the included wall mounts high on the walls.
2. Connect the safety Euroblock input and loop on from the output.
3. Aim each speaker at the tables.
4. Set levels for the busy hours.

Tip: Check the total impedance of the speakers on each amplifier channel.

Workflow 2: Retail store

Music with discreet speakers in a shop.

Connections

Setup

1. Place speakers along the sales floor.
2. Use the wall mount or a surface installation.
3. Fit a safety anchor to one of the M8 points.
4. Balance levels across the store.

Tip: The black cubic design integrates discreetly.

Workflow 3: Hotel lobby or bar

Background music and announcements.

Connections

Setup

1. Fix the speakers near the seating areas.
2. Aim using the adjustable bracket.
3. Connect via the safety Euroblock.
4. Adjust the level for the ambience.

Tip: Controlled 105° x 110° dispersion directs the sound where it is needed.

Workflow 4: Sports facility

Sound in gyms and studios.

Connections

Setup

1. Mount the speakers on the walls.
2. Fit a safety anchor to an M8 point.
3. Connect and loop the line.
4. Raise the level gradually.

Tip: 119 dB peak SPL keeps music clear in lively spaces.

Workflow 5: Small event or meeting

Portable sound on stands.

Connections

Setup

1. Place the speakers on microphone stands using the 3/8 inch adapter.
2. Connect the speakers.
3. Aim them at the audience.
4. Check the sound before starting.

Tip: At 3.75 kg the LIGNUM-6 is easy to place on a stand.

Workflow 6: Café terrace under cover

Music in a covered outdoor area.

Connections

Setup

1. Fix the wall mounts under the cover.
2. Connect the speakers.
3. Aim them towards the tables.
4. Keep within the operating temperature range.

Tip: Polyurea coating and powder-coated grille protect the enclosure.