FONESTAR SKY-6T

Product overview

The FONESTAR SKY-6T is a 6 inch double cone ceiling loudspeaker with a 100 V line transformer and a low profile, frameless aluminium grille, for public address and background sound in commercial spaces.

Its frameless, low profile grille in rust-resistant aluminium gives a discreet, modern finish: it is detachable, lockable by turning, and the logo can be removed so the grille can be painted to suit the space. High conductivity quick-connect terminals, an anti-fall system, a hook for a safety cable and stable worm screw brackets make installation fast in ceilings up to 30 mm thick. FONESTAR describes the SKY-6T as a pair of 6 inch double cone ceiling speakers.

Key features

• 6 inch polypropylene double cone diaphragm
• 15 W RMS, 20 W max.
• 100 V line transformer with 15/10/5 W taps at 100 V and 70 V taps
• Response 55-18,000 Hz @ -10 dB; 85-18,000 Hz @ -3 dB
• 88 dB sensitivity, up to 100 dB peak sound pressure
• Coverage 150° at 1 kHz (-6 dB)
• IP-44 (IEC 60529) and EN ISO 9227:2006 neutral salt spray test
• Low profile frameless aluminium grille, detachable, turn-lockable and paintable
• High conductivity quick-connect terminals for 0.4-4 mm² cable
• Anti-fall system, hook for safety cable and worm screw ceiling brackets
• Installation hole Ø 219 mm, ceilings up to 30 mm thick

Discreet frameless design

The grille sits only 5 mm proud of the ceiling. It is made of rust-resistant aluminium with a liquid paint finish, detaches and locks by turning, and can be painted to match the decor once the logo is removed. The body is UV-resistant ABS.

100 V line taps

The transformer taps are colour-coded on the label (yellow 666 Ω, blue 1,000 Ω, green 2,000 Ω; COM black). Choose the tap that suits each area and check that the total of the taps stays within the amplifier power.

Fast, safe installation

Cut the hole with the template supplied, remove the grille, fit a safety cable to the hook (safety cable not included), connect COM and the tap wire in the TAP-LOCK connector, place the loudspeaker in the hole with the anti-drop system, tighten the worm screw brackets and turn the grille clockwise until it clicks.

In the box

• SKY-6T ceiling loudspeakers (FONESTAR describes the SKY-6T as a pair)
• Installation template

FONESTAR SKY-6T: frequently asked questions

What size hole does the SKY-6T need?

A Ø 219 mm hole in a ceiling up to 30 mm thick; the recessed height is 80 mm and an installation template is included.

Can the grille be painted?

Yes. The frameless aluminium grille is detachable, the logo can be removed and the grille can be painted to suit the space.

Is it suitable for damp areas?

It is IP-44 rated according to IEC 60529 and has passed the EN ISO 9227:2006 neutral salt spray test, with an operating range of -20 °C to 70 °C and up to 95 % humidity.

Does it work on a 100 V line?

Yes. It has a 100 V line transformer with 15/10/5 W taps at 100 V and 70 V taps.

Where can I buy the FONESTAR SKY-6T in India?

The FONESTAR SKY-6T is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Hotel corridors

Background music and announcements along hotel corridors.

Connections

Setup

1. Cut Ø 219 mm holes with the template.
2. Fit a safety cable to each hook.
3. Connect a low tap for corridors.
4. Fit the grilles and turn until they click.

Tip: Paint the grilles to match the ceiling.

Workflow 2: Shop sales floor

Even background music across a retail space.

Connections

Setup

1. Space the speakers evenly in the ceiling.
2. Use the same tap in one zone.
3. Check the total of the taps against the amplifier power.
4. Set a comfortable level.

Tip: The frameless grille keeps the ceiling clean and discreet.

Workflow 3: Office and meeting areas

Paging and background music in offices.

Connections

Setup

1. Install the speakers over desks and meeting areas.
2. Choose lower taps in small rooms.
3. Use the anti-drop system during fitting.
4. Fit the grilles.

Tip: Quick-connect terminals speed up large installations.

Workflow 4: Restaurant and café

Music for dining areas without visible speakers.

Connections

Setup

1. Plan speaker positions over the seating.
2. Fit the speakers with the worm screw brackets.
3. Select the tap for each area.
4. Adjust the level for service hours.

Tip: Paint the grille to match a coloured ceiling.

Workflow 5: Covered terraces and damp areas

Sound under covered outdoor ceilings or in damp indoor spaces.

Connections

Setup

1. Install in the ceiling of the covered area.
2. Fit a safety cable to every speaker.
3. Use the quick-connect terminals with 0.4-4 mm² cable.
4. Check the level at the edges of the area.

Tip: IP-44 and the neutral salt spray test suit damp and saline environments.

Workflow 6: Residential installation

Discreet music in living areas.

Connections

Setup

1. Cut the holes with the template.
2. Connect the chosen tap.
3. Fix the speakers with the brackets.
4. Fit and lock the grilles.

Tip: The low profile grille is only 5 mm proud of the ceiling.