FONESTAR SONORA-5

Product overview

The FONESTAR SONORA-5 is a 5¼ inch two-way surface loudspeaker with low impedance (8 Ω), IP-66 protection and a salt spray test, ready for indoor and outdoor public address and background sound.

SONORA is a FONESTAR series of loudspeakers specially designed for PA, music and background sound. Its excellent finish and elegant design let it blend into any space, and the SONORA-5 is fully prepared for outdoor use with a powder-coated aluminium grille, a UV-resistant ABS enclosure and A2 stainless steel screws. Its 5¼ inch polypropylene woofer and 1 inch tweeter deliver clear, distortion-free sound from 80 to 20,000 Hz. Every speaker comes with a weatherproofed adjustable mount, stainless steel screws and a steel safety cable for a quick installation in restaurants, cafés, supermarkets, shopping centres, hotels and schools.

Key features

• Two-way surface loudspeaker: 5¼ inch polypropylene woofer, 1 inch tweeter
• 80 W max., 40 W RMS
• Low impedance 8 Ω for direct connection to an amplifier output
• 88.3 dB sensitivity and 102.2 dB maximum sound pressure
• Coverage 135° / 135° @ 1 kHz (H/V) (-6 dB)
• IP-66 according to EN 60529 and IEC 60068-2-11 salt spray test
• UV-resistant ABS enclosure, powder-coated aluminium mesh grille, A2 stainless steel screws
• Euroblock input and output with rubber cable glands for round cables of 4-7 mm
• Adjustable mounting bracket ±60° in all directions and steel safety cable included
• Available in white (RAL 9003) and black (RAL 9005)

Ready for outdoor spaces

The SONORA-5 is protected to IP-66 and has passed the IEC 60068-2-11 salt spray test, so it suits terraces, pools, gardens and coastal sites as well as indoor spaces. The ABS enclosure resists UV light, the aluminium mesh grille has a powder-coated finish and the mount is weather-resistant. Round cables through the rubber glands keep the IP protection.

Low impedance connection

The SONORA-5 is a low impedance (8 Ω) loudspeaker for direct connection to an amplifier output, rated 80 W max., 40 W RMS. The Euroblock input and output let you loop the signal on to a further loudspeaker; check the conditions for a low impedance installation and use appropriate power, impedance and frequency limits, as FONESTAR advises.

Quick and easy installation

Fix the wall plate, connect the input and output cables, click the speaker onto the bracket and close the connector cover. The bracket turns ±60° in all directions to aim the sound where it is needed, and the steel safety cable adds security.

In the box

• SONORA-5 loudspeaker
• Adjustable mounting bracket
• Stainless steel screws
• Steel safety cable

Available versions

• SONORA-5-WH: white (RAL 9003), earlier code SONORA-5B
• SONORA-5-BK: black (RAL 9005), earlier code SONORA-5N

FONESTAR SONORA-5: frequently asked questions

Can the SONORA-5 be installed outdoors?

Yes. It is IP-66 rated according to EN 60529, has passed the IEC 60068-2-11 salt spray test and uses waterproof and rustproof materials.

What impedance and power does the SONORA-5 have?

It is a low impedance loudspeaker: 8 Ω, 80 W max., 40 W RMS, for direct connection to an amplifier output.

Which mounting hardware is included?

An adjustable mounting bracket (±60° in all directions), stainless steel screws and a steel safety cable.

Which colours are available?

White (RAL 9003), code SONORA-5-WH, and black (RAL 9005), code SONORA-5-BK.

Where can I buy the FONESTAR SONORA-5 in India?

The FONESTAR SONORA-5 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Restaurant terrace

Background music on an outdoor terrace exposed to sun and rain.

Connections

Setup

1. Fix the wall plates and mount the speakers.
2. Run round cable to the Euroblock connectors and close the cover.
3. Aim each speaker at the seating area.
4. Raise the amplifier level gradually.

Tip: White or black versions match the façade.

Workflow 2: Café or bar stereo pair

Music for a café, bar or small shop from a stereo amplifier.

Connections

Setup

1. Mount one speaker on each side of the room.
2. Wire each speaker to its own amplifier channel.
3. Aim both speakers towards the centre of the room.
4. Keep the amplifier within the speaker's power rating.

Tip: The SONORA-5 is rated 80 W max., 40 W RMS at 8 Ω.

Workflow 3: Hotel pool and garden

Weatherproof sound for pools, gardens and coastal sites.

Connections

Setup

1. Mount the speakers out of reach on walls or posts.
2. Use round outdoor cable and tighten the glands.
3. Aim the speakers at the listening area.
4. Fit the steel safety cable to every speaker.

Tip: The salt spray test makes the SONORA-5 suitable for coastal installations.

Workflow 4: Shop and showroom

Background music on the sales floor of a shop or showroom.

Connections

Setup

1. Place the speakers high on the walls.
2. Check the total impedance the amplifier will see before looping speakers.
3. Aim the speakers at the customer areas.
4. Set a comfortable background level.

Tip: Use appropriate power, impedance and frequency limits, as FONESTAR advises.

Workflow 5: Meeting room or classroom

Clear speech and music for a small room.

Connections

Setup

1. Mount the speakers at the front corners of the room.
2. Aim them at the seating area.
3. Connect them to the amplifier outputs.
4. Check speech clarity from the back row.

Tip: The wide coverage reaches the whole room from the walls.

Workflow 6: Gym or sports area

Music for gyms, courts and changing areas.

Connections

Setup

1. Mount the speakers on the walls with the safety cable fitted.
2. Run round cable to the connectors.
3. Aim the speakers at the activity area.
4. Set the amplifier level for the busiest times.

Tip: IP-66 protection and the UV-resistant enclosure suit humid and outdoor sports areas.