FYNE AUDIO F1-8 product guide and data sheet cover
‹
FYNE AUDIO F1-8 product guide and data sheet coverFYNE AUDIO F1-8 data sheet page 2: Flagship technology, stand-mount sizeFYNE AUDIO F1-8 data sheet page 3: IsoFlare point source driverFYNE AUDIO F1-8 data sheet page 4: BassTrax and the aluminium platformFYNE AUDIO F1-8 data sheet page 5: Crossover, connections and specifications
›

Brand: FYNE AUDIO

FYNE AUDIO F1-8

PRICE ON ENQUIRY

Category: Bookshelf Speakers | Series: F1 SERIES

Fyne Audio F1-8: flagship F1 Series stand-mount speaker with 8-inch IsoFlare point source driver, BassTrax plinth and Presence control. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

System type2-way, downward-firing port with BassTrax Tractrix diffuser
Nominal impedance8 Ω
Frequency response (-6 dB, typical in room)33 Hz - 34 kHz
Sensitivity (2.83 V/1 m)91 dB

Power

Recommended amplifier power30 - 180 W RMS
Continuous power handling90 W RMS
Peak power handling360 W

Drivers

IsoFlare point source driver1 × 200 mm: multi-fibre bass / midrange cone, FyneFlute surround, 25 mm magnesium dome compression tweeter, ferrite magnet system

Crossover

Crossover frequency1.8 kHz
Crossover typeBi-wired passive low loss, 2nd order low pass, 1st order high pass, deep cryogenically treated
System adjustmentsPresence (2.5 - 5.0 kHz) ±3 dB

Physical

Cabinet constructionPressed high-density birch ply, internally braced
Dimensions (H × W × D)470 × 280 × 441 mm (18.5 × 11.0 × 17.4 in)
Dimensions includeGrille, terminals and plinth; feet excluded
Net weight, each15.2 kg (33.5 lb)
S-Trax position (from cabinet front edge)69 mm (2.7 in)
SuperTrax position (from cabinet front edge)45 mm (1.8 in)

Finishes

FinishPiano Gloss Walnut (walnut veneer with burr walnut inlay)

Product overview

The Fyne Audio F1-8 is the stand-mount of the flagship F1 Series, distilling the technology of its floorstanding siblings into a smaller format with an 8-inch (200 mm) IsoFlare point source driver, a 25 mm magnesium compression tweeter and a BassTrax diffuser in its machined aluminium plinth.

The F1 Series is the pinnacle of Fyne Audio's engineering: designed, manufactured, hand finished and tested in Glasgow. The F1-8's handcrafted cabinet sits on a machined aluminium plinth that houses the BassTrax low-frequency diffuser, and it is hand finished in real walnut veneer with a burr walnut inlay, lacquered to a deep gloss.

At its heart is the IsoFlare point source driver: the bass / midrange cone shares a common centre with the high-frequency unit, so sound comes from a single point as a time-aligned wavefront with outstanding stereo imaging, even off axis. The 200 mm multi-fibre paper cone with FyneFlute surround gives a natural midrange and clean transients, driven by a ferrite magnet motor, while the 25 mm magnesium dome compression tweeter has a vented rear chamber that places its resonance well below the crossover region and a computer-optimised annular waveguide for a flat response. The driver is built on a custom-tooled, rigid cast aluminium chassis.

The downward-firing port vents onto the BassTrax Tractrix profile diffuser, which converts plane-wave energy into an expanding spherical 360-degree wavefront, dispersing bass uniformly and making the speaker less critical of room position. The pressed high-density birch-ply cabinet is extremely rigid for low colouration, with the drive unit coupled to the internal bracing through damping material, and the machined aluminium platform gives exceptional stability for precise bass and fine detail.

The crossover is simple in topology but computer optimised and fine-tuned by critical listening, with low-loss laminated iron-core inductors, high-grade polypropylene capacitors and silver-coated OFC copper internal wiring, hard wired on fibreboard panels with a damping mastic. The complete crossover is cryogenically treated, a grounding terminal drains radio frequency interference, and a front-panel Presence control adjusts the lower treble by ±3 dB to suit the room and your taste.

Frequency response (-6 dB, typical in room) 33 Hz - 34 kHz
Sensitivity (2.83 V/1 m) 91 dB
Recommended amplifier power (RMS) 30 - 180 W
Presence control (2.5 - 5.0 kHz) ±3 dB

Key features

  • Flagship F1 Series stand-mount loudspeaker, designed, built and hand finished in Glasgow
  • 200 mm IsoFlare point source driver with 25 mm magnesium dome compression tweeter, ferrite magnet system
  • Time-aligned, isotropic radiation for outstanding imaging, even off axis
  • Multi-fibre paper cone with FyneFlute surround and rigid cast aluminium chassis
  • BassTrax Tractrix diffuser in the machined aluminium plinth for a 360-degree bass wavefront
  • Front-panel Presence control: ±3 dB between 2.5 and 5.0 kHz
  • Computer-optimised, cryogenically treated crossover hard wired on damped fibreboard panels
  • Gold-plated bi-wire terminals for single-wire, bi-wire or bi-amp use
  • Earth terminal to ground the driver chassis against RF interference
  • Pressed high-density birch-ply cabinet in gloss walnut veneer with burr walnut inlay

Made for

  • High-end stereo listening rooms
  • Mounting on the dedicated FS8 stand
  • Bi-wired or bi-amped systems
  • Valve and solid-state amplifiers alike

Placement and set-up

  • Stereo: about 1.5 - 4.5 m (5 - 15 ft) apart
  • Ideally no closer than 0.5 m (20 in) to the rear wall and 1 m (3 ft) to the side walls
  • Experiment with toe-in towards the listener for the best stereo imaging
  • Fyne Audio strongly recommends the dedicated FS8 stand; any other stand should be rigid and well damped, with the drive unit centre at about seated ear height
  • Used without a stand, fit 4 self-adhesive feet to protect the surface
  • Start with the Presence control at its central (level) position and adjust in small steps

In the box

  • F1-8 loudspeakers in protective cloth bags
  • 8 self-adhesive feet
  • 4 bi-wire links

Connections

  • Bi-wire terminals: separate HF and LF pairs, gold plated
  • Bi-wire links for single-wire mode
  • Bi-amping possible with the links removed
  • Earth / ground terminal connected to the driver chassis (optional use)
  • Accepts 4 mm banana plugs or spades

Finishes

  • Piano Gloss Walnut: real walnut veneer with burr walnut inlay

Fyne Audio F1-8: frequently asked questions

What does the Presence control do?

It adjusts only the lower treble region of 2.5 - 5.0 kHz by up to ±3 dB, influencing articulation, vocal clarity and image depth. Start in the central (level) position and make small adjustments with well-recorded music you know.

What amplifier suits the F1-8?

Fyne Audio recommends 30 - 180 W RMS into 8 Ω; power handling is 90 W RMS continuous and 360 W peak, with 91 dB sensitivity (2.83 V/1 m). Fyne Audio does not favour transistor or valve designs; lower-powered valve amplifiers will not damage the speakers but will limit maximum volume and dynamic range, especially in large rooms.

Which stand should I use for the F1-8?

Fyne Audio's dedicated FS8 stand, which bolts to the threaded holes in the F1-8's base with the M6 bolts supplied with the stand.

Can the F1-8 be bi-wired or bi-amped?

Yes. Use the link cables for single-wire mode (Fyne Audio notes the best sound usually comes from connecting to the HF terminals), remove them for bi-wiring, or bi-amp with two stereo or four mono power amplifiers, the links removed. Bi-wiring or bi-amping gives the best performance.

How should I care for the cabinet?

Clean it with a microfibre cloth and occasionally use a high-quality non-silicone furniture polish on the gloss wood. Avoid long exposure to extremes of heat, humidity and direct sunlight, never use solvents or abrasives, and use the cloth bags supplied if the speakers will be unused for a long time.

Where can I buy the Fyne Audio F1-8 in India?

The Fyne Audio F1-8 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Stereo pair on stands

Music lovers building a no-compromise stereo system.

Connections

ConnectTo
Amplifier left speaker outputLeft F1-8 terminals
Amplifier right speaker outputRight F1-8 terminals

Setup

  1. Bolt the F1-8 to FS8 stands with the M6 bolts and spring washers supplied with the stands.
  2. Set the speakers about 1.5 - 4.5 m apart, ideally 0.5 m from the rear wall and 1 m from the side walls, with the drive unit at about seated ear height.
  3. With the amplifier switched off, wire positive to positive and negative to negative, fitting the link cables for single-wire mode.
  4. Toe the speakers in towards the listening seat.
  5. Set the Presence control to its central position, then fine-tune in small steps.

Tip: Adjusting Presence is like focusing a camera lens: aim for the most realistic sound.

Workflow 2: Bi-amped system

Enthusiasts who want the last increment of sound quality from the F1-8.

Connections

ConnectTo
Stereo power amplifier 1 (LF)LF terminals of both speakers
Stereo power amplifier 2 (HF)HF terminals of both speakers

Setup

  1. Switch all amplifiers off.
  2. Remove the link cables; they must not be in place when bi-amping.
  3. Use one stereo amplifier for the LF sections of both speakers and the other for the HF sections, or use four mono amplifiers.
  4. Optionally ground the earth terminal with a screened loudspeaker cable.
  5. Switch on and balance levels.

Tip: Never bi-amp with the link cables fitted: it can damage the amplifiers.

Workflow 3: Valve amplifier system

Listeners who prefer valve (tube) amplification.

Connections

ConnectTo
Valve amplifier speaker outputsF1-8 terminals

Setup

  1. Choose an amplifier within, or close to, the 30 - 180 W RMS range.
  2. Wire the speakers, keeping cables short and of good quality.
  3. Play at normal levels; lower-powered amplifiers will not damage the speakers but limit maximum volume.
  4. Fine-tune the Presence control for vocal clarity.

Tip: In a large room, a more powerful amplifier preserves dynamic range.

Workflow 4: Grounded system for maximum detail

Listeners in homes with many wireless devices and RF sources.

Connections

ConnectTo
Screened loudspeaker cable screen or separate earth wireF1-8 earth terminal
Earth wire other endAmplifier ground / earth connection

Setup

  1. Switch the amplifier off.
  2. Connect the speaker terminals as usual.
  3. Connect the earth terminal to the amplifier's ground connection, ideally through a dedicated screened loudspeaker cable.
  4. Switch on and listen for improved fine detail.

Tip: The earth terminal grounds the driver chassis so RF interference does not mask detail and resolution.

Workflow 5: Vinyl and streaming listening room

Record collectors who also stream high-resolution music.

Connections

ConnectTo
TurntableAmplifier phono input
Network streamerAmplifier line input
Amplifier speaker outputsF1-8 pair

Setup

  1. Keep the turntable on a solid surface away from the speakers.
  2. Connect turntable and streamer to the amplifier.
  3. Place the speakers on rigid stands and toe them in.
  4. Adjust Presence for the room's acoustics.

Tip: Use 4 mm banana plugs or spades of high quality on the speaker cables.

Workflow 6: Study or home office system

People who want flagship sound in a room they also work in.

Connections

ConnectTo
Computer or streamerIntegrated amplifier
Amplifier speaker outputsF1-8 pair

Setup

  1. Place the speakers either side of the desk, angled towards the chair.
  2. Connect the source to the amplifier and the amplifier to the speakers.
  3. Lower the Presence slightly if the room is bright and hard-surfaced.
  4. Cover the speakers with their cloth bags when away for long periods.

Tip: Polish the gloss walnut only occasionally with a non-silicone furniture polish.

Request a Quote

FYNE AUDIO F1-8

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›