








FYNE AUDIO F700
PRICE ON ENQUIRY
Fyne Audio F700: UK-built 2-way stand-mount with 6-inch IsoFlare point source driver, BassTrax diffuser, 40 Hz - 34 kHz, 89 dB. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
General
| System type | 2-way, downward-firing port with BassTrax Tractrix diffuser |
| Nominal impedance | 8 Ω |
| Frequency response (-6 dB, typical in room) | 40 Hz - 34 kHz |
| Sensitivity (2.83 V/1 m) | 89 dB |
Power
| Recommended amplifier power | 30 - 150 W RMS |
| Continuous power handling | 75 W RMS |
| Peak power handling | 300 W |
Drivers
| IsoFlare point source driver | 1 × 150 mm: multi-fibre bass / midrange cone, FyneFlute surround, 25 mm magnesium dome compression tweeter, neodymium magnet system |
Crossover
| Crossover frequency | 1.7 kHz |
| Crossover type | Bi-wired passive low loss, 2nd order low pass, 1st order high pass, Cryo-Lite treated |
Physical
| Cabinet construction | Pressed high-density birch ply with extensive internal bracing |
| Dimensions (H × W × D) | 348 × 224 × 337 mm (13.7 × 8.8 × 13.3 in) |
| Dimensions include | Grille, terminals and plinth; feet excluded |
| Net weight, each | 9.0 kg (19.8 lb) |
| S-Trax position (from cabinet front edge) | 46 mm (1.8 in) |
| SuperTrax position (from cabinet front edge) | 22 mm (0.9 in) |
Finishes
| Finish options | Piano Gloss Black, Piano Gloss White, Piano Gloss Walnut |
Versions
| F80000261 | Piano Gloss Black |
| F80000260 | Piano Gloss Walnut |
| F80000262 | Piano Gloss White |
Product overview
The Fyne Audio F700 is the compact bookshelf model of the UK-built F700 Series: a 2-way loudspeaker with a 6-inch (150 mm) IsoFlare point source driver and a BassTrax diffuser in its downward-firing port, in a handcrafted, piano-lacquered cabinet.
The F700 distils the best of Fyne Audio's technologies into a compact design, with trickle-down technology from the flagship F1 Series. Refined, articulate and powerful, it recreates a truly natural sound in a small cabinet, made for listeners who want high-end hi-fi in a limited space. High-gloss piano lacquer over black, white or walnut veneer is the finishing touch to its handcrafted cabinet.
IsoFlare point source drivers are at the heart of every F700 model. A compression tweeter is mounted coaxially at the heart of a potent bass / midrange driver with a rigid multi-fibre cone and a FyneFlute roll surround, so sound radiates isotropically from a single point for precise imaging and an even frequency response. The tweeter's neodymium motor has a vented rear chamber and a metal pole piece to transfer heat for outstanding power handling, and a waveguide of unique geometry tunes its output. The massive bass motor includes a flux focusing magnet for higher low-frequency sensitivity.
The cabinet is handcrafted from high-density birch plywood, chosen for its very low colouration, with a sculpted shape whose curved panels diffuse standing waves and extensive internal bracing. Below it, Fyne Audio's BassTrax system feeds a large downward-firing port onto a Tractrix profile diffuser cone on the machined aluminium plinth, creating a true 360-degree bass wavefront. The result is the depth and scale of a large ported speaker without the bass bloom of typical port / room interaction, and far less sensitivity to room position.
The crossover combines low-loss inductors, high-grade capacitors and high-purity silver-plated internal wiring treated by Fyne Audio's Cryo-Lite super-freezing and slow-thawing process for a clean, transparent signal path. The bi-wire terminal panel has premium gold-plated binding posts and gold-plated link cables, plus a fifth terminal for grounding the driver chassis against radio frequency interference. Each speaker is built in the UK and finished in high-gloss piano lacquer.
| Frequency response (-6 dB, typical in room) | 40 Hz - 34 kHz |
| Sensitivity (2.83 V/1 m) | 89 dB |
| Recommended amplifier power (RMS) | 30 - 150 W |
| IsoFlare point source driver | 6-inch |
Key features
- UK-built 2-way stand-mount loudspeaker with trickle-down technology from the flagship F1 Series
- 150 mm IsoFlare point source driver with 25 mm magnesium dome compression tweeter at its centre
- BassTrax Tractrix diffuser under a large downward-firing port for a 360-degree bass wavefront
- Multi-fibre cones, FyneFlute roll surrounds and flux focusing magnet
- Sculpted, curved cabinet in high-density birch plywood with extensive internal bracing
- Crossover with low-loss inductors, high-grade capacitors and Cryo-Lite treated silver-plated wiring
- Bi-wire terminals with gold-plated binding posts and link cables, plus a chassis earth terminal
- Machined aluminium plinth carrying the BassTrax diffuser
- Magnetically attached grille
- High-gloss piano lacquer in black, white or walnut veneer
Made for
- Stereo systems in compact living rooms, bedrooms and studies
- Listeners who want high-end hi-fi in a limited space
- Mounting on the matching FS8 stand
- Surround channels of a premium home cinema
Placement and set-up
- Stereo: about 1.5 - 4.5 m (5 - 15 ft) apart
- Ideally no closer than 0.5 m (20 in) to the rear wall and 1 m (3 ft) to the side walls
- Experiment with toe-in towards the listener for the best stereo imaging
- Fyne Audio strongly recommends the dedicated FS8 stand; any other stand should be rigid and well damped, with the driver centre roughly at seated ear height
- Used without a stand, fit the 4 self-adhesive feet provided to protect the surface
In the box
- F700 loudspeaker with magnetic grille
- Gold-plated link wires
- 4 self-adhesive feet
Connections
- Bi-wire terminal panel: HF and LF terminal pairs with gold-plated binding posts
- Gold-plated link wires for single wiring
- Fifth terminal: earth / ground connection to the driver chassis (optional use)
- Accepts bare wire or 4 mm plugs
Finishes
- Piano Gloss Black
- Piano Gloss White
- Piano Gloss Walnut (high-gloss piano lacquer over walnut veneer)
Fyne Audio F700: frequently asked questions
What amplifier suits the F700?
Fyne Audio recommends 30 - 150 W RMS into the F700's 8 Ω nominal impedance. Power handling is 75 W RMS continuous and 300 W peak, with 89 dB sensitivity (2.83 V/1 m).
Which stand should I use?
Fyne Audio strongly recommends its dedicated FS8 stand for the F700. Any other stand should be rigid, well damped and able to carry the speaker's weight, with the drive unit centre at about seated ear height.
Can the F700 be bi-wired?
Yes. There are separate HF and LF terminal pairs. Use the link wires provided for a single cable, or omit them and wire with two sets of cable or a dedicated bi-wire cable for the best possible sound quality.
What is the fifth terminal for?
It connects to the drive unit chassis so radio frequency interference can be grounded instead of getting back to the amplifier and masking fine detail. A separate earth wire works, but a dedicated screened loudspeaker cable gives the best results.
Should I listen with the grille on or off?
The magnetically attached grille is designed for maximum transparency, but Fyne Audio recommends removing it for the best possible sound quality.
Where can I buy the Fyne Audio F700 in India?
The Fyne Audio F700 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Stereo pair on FS8 stands
Music lovers building a high-end stereo system in a living room or study.
Connections
| Connect | To |
|---|---|
| Integrated amplifier left speaker output | Left F700 terminals |
| Integrated amplifier right speaker output | Right F700 terminals |
Setup
- Set up a pair of FS8 stands and place the speakers on them, with the drive unit centre at about seated ear height.
- Set the speakers about 1.5 - 4.5 m apart, ideally 0.5 m from the rear wall and 1 m from the side walls.
- With the amplifier switched off, connect the link wires and wire positive to positive, negative to negative.
- Toe the speakers in towards the listening seat until the stereo image locks in.
- Remove the grilles for the best sound.
Tip: Choose an amplifier in the 30 - 150 W RMS range.
Workflow 2: Bi-wired system with chassis earth
Listeners who want the last degree of detail from their amplifier and cables.
Connections
| Connect | To |
|---|---|
| Amplifier outputs via two cable sets or a bi-wire cable | F700 HF and LF terminals, link wires omitted |
| Screened cable screen or separate earth wire | F700 earth terminal |
Setup
- Switch the amplifier off.
- Remove the link wires between the HF and LF terminals.
- Wire each channel to the HF and LF pairs with two cable sets or a dedicated bi-wire cable.
- Optionally ground the fifth terminal with a separate earth wire or, best, a screened loudspeaker cable.
- Check every connection for polarity before switching on.
Tip: Grounding the chassis keeps radio frequency interference from masking fine detail.
Workflow 3: Home cinema surround or front pair
Families building a premium living-room or dedicated cinema around an AV receiver.
Connections
| Connect | To |
|---|---|
| TV or projector source with HDMI | AV receiver |
| AV receiver front or surround left / right outputs | F700 pair |
| AV receiver centre output | F57SP-6 or F57SP-8 centre channel |
| AV receiver subwoofer output | Powered subwoofer |
Setup
- Place the F700 pair on FS8 stands, either side of the screen or beside the seating for surrounds, toed in towards the main seat.
- Add an F57SP centre channel, voiced and finished to match the F700 Series.
- Wire everything with the receiver switched off.
- Run the receiver's speaker set-up for levels, distances and crossover.
Tip: Matching IsoFlare drivers across the front keeps voices and effects seamless as they pan across the screen.
Workflow 4: Room with limited placement options
Homes where the speakers cannot stand far out into the room.
Connections
| Connect | To |
|---|---|
| Stereo amplifier speaker outputs | F700 pair |
Setup
- Place the speakers as far from the walls as the room allows, ideally at least 0.5 m from the rear wall.
- Let the BassTrax diffuser spread the port output in a 360-degree wavefront.
- Play familiar bass-rich music and move the speakers a little at a time until the bass sounds even.
- Fine-tune the toe-in for imaging.
Tip: BassTrax avoids the bass bloom of typical port / room interaction, so placement can follow the room's practical needs.
Workflow 5: Vinyl and streaming system
Listeners who play records and stream high-resolution music.
Connections
| Connect | To |
|---|---|
| Turntable | Amplifier phono input |
| Network streamer | Amplifier line input |
| Amplifier speaker outputs | F700 pair |
Setup
- Keep the turntable on a solid surface away from the speakers.
- Connect the turntable and the streamer to the amplifier.
- Keep the speakers on rigid stands, bolted or secured to the top plates.
- Set the toe-in so vocals sit in the centre between the speakers.
Tip: Clean the piano-lacquer cabinets only with a microfibre cloth and keep them out of long exposure to direct sunlight.
Workflow 6: Living room TV and music system
Homes where one stereo pair serves films and music.
Connections
| Connect | To |
|---|---|
| TV audio output | Amplifier HDMI ARC or optical input (as the amplifier provides) |
| Amplifier speaker outputs | F700 pair |
Setup
- Place a speaker either side of the TV, about 1.5 - 4.5 m apart.
- Connect the TV to the amplifier's matching input.
- Wire the F700 pair to the amplifier.
- Set the TV to send its sound to the external audio output.
Tip: Add a powered subwoofer through the amplifier's subwoofer output if you want more depth with films.








