FYNE AUDIO F701SP product guide and data sheet cover
‹
FYNE AUDIO F701SP product guide and data sheet coverFYNE AUDIO F701SP data sheet page 2: Special Production refinementFYNE AUDIO F701SP data sheet page 3: IsoFlare and multi-fibre conesFYNE AUDIO F701SP data sheet page 4: Placement and careFYNE AUDIO F701SP data sheet page 5: Crossover and connectionsFYNE AUDIO F701SP data sheet page 6: Specifications
›

Brand: FYNE AUDIO

FYNE AUDIO F701SP

PRICE ON ENQUIRY

Category: Bookshelf Speakers | Series: F700SP SERIES

Fyne Audio F701SP: UK hand-built Special Production stand-mount with F1-8 8-inch IsoFlare driver, BassTrax, 35 Hz - 34 kHz. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

System type2-way, downward-firing port with BassTrax Tractrix diffuser
Nominal impedance8 Ω
Frequency response (-6 dB, typical in room)35 Hz - 34 kHz
Sensitivity (2.83 V/1 m)90 dB

Power

Recommended amplifier power30 - 180 W RMS
Continuous power handling90 W RMS
Peak power handling360 W

Drivers

IsoFlare point source driver1 × 200 mm: multi-fibre bass / midrange cone, FyneFlute surround, 25 mm magnesium dome compression tweeter, ferrite magnet system

Crossover

Crossover frequency1.8 kHz
Crossover typeBi-wired passive low loss, 2nd order low pass, 1st order high pass, deep cryogenic treatment

Physical

Cabinet constructionPressed high-density birch ply with extensive internal bracing
Dimensions (H × W × D)465 × 278 × 393 mm (18.3 × 10.9 × 15.5 in)
Dimensions includeGrille, terminals and plinth; feet excluded
Net weight, each14.0 kg (30.9 lb)
S-Trax position (from cabinet front edge)63 mm (2.5 in)
SuperTrax position (from cabinet front edge)39 mm (1.5 in)

Finishes

Finish optionsNatural Walnut, Piano Gloss Walnut, Piano Gloss Black, Piano Gloss White

Versions

F80000653Natural Walnut
F80000651Piano Gloss Black
F80000650Piano Gloss Walnut
F80000652Piano Gloss White

Product overview

The Fyne Audio F701SP is the Special Production version of the F701 stand-mount: hand built in the UK with the 8-inch (200 mm) IsoFlare driver from the F1-8, a redesigned, cryogenically treated crossover and the BassTrax diffuser on a black metal plinth.

Housed in the F701 stand-mount cabinet and finished with black anodised aluminium trims, the F701SP adds the F1-8's IsoFlare driver with a refined HF waveguide for a smoother frequency response from its 25 mm magnesium dome and ferrite magnet system. The crossover has been overhauled and optimised through computer modelling and extensive listening tests, then given Fyne Audio's deep cryogenic treatment, so you hear every nuance in mid to large-sized rooms.

The F700SP Series gives the F700 models the Special Production treatment, with trickle-down enhancements from the flagship F1 Series and a significant performance improvement over the originals. At the heart of each model is an IsoFlare point source driver: a compression tweeter mounted coaxially in a potent bass / midrange driver with a rigid multi-fibre cone and FyneFlute roll surround, for true isotropic radiation, precise imaging, detailed midrange and quick transients. Massive motor assemblies raise low-frequency sensitivity for the dynamics of high-energy instruments.

The contemporary F700 cabinet is kept: curved panels in high-density birch plywood disperse standing waves and reduce resonance. A substantial downward-firing port feeds the BassTrax Tractrix diffuser, producing a 360-degree bass wavefront that mimics the scale of a large ported speaker without port / room problems and makes the speaker far less dependent on placement. The speaker sits on a matching black metal plinth that carries the BassTrax diffuser.

The redesigned crossover circuit topology is optimised by computer modelling and extended listening, with high-grade, low-resonance polypropylene HF capacitors, high-purity internal wiring and upgraded gold-plated terminals. Cryogenic treatment of the complete crossover in Fyne Audio's own facility relaxes stresses in materials, solder joints and cables, and a grounding terminal drains radio frequency interference. The hand-assembled cabinets are finished in piano gloss black, white, lacquered walnut veneer or the new Natural Walnut.

Frequency response (-6 dB, typical in room) 35 Hz - 34 kHz
Sensitivity (2.83 V/1 m) 90 dB
Recommended amplifier power (RMS) 30 - 180 W
IsoFlare point source driver 8-inch

Key features

  • Special Production 2-way stand-mount, hand built in the UK
  • 200 mm IsoFlare point source driver from the F1-8 with 25 mm magnesium dome compression tweeter, ferrite magnet system
  • Refined HF waveguide for a smoother frequency response
  • BassTrax Tractrix diffuser with a substantial downward-firing port for a 360-degree bass wavefront
  • Redesigned crossover with high-grade low-resonance polypropylene HF capacitors and high-purity internal wiring
  • Complete crossover cryogenically treated in Fyne Audio's own facility
  • Upgraded gold-plated bi-wire terminals with a chassis grounding terminal
  • Black anodised aluminium trims and black metal plinth
  • Curved high-density birch-ply cabinet with extensive internal bracing
  • Natural Walnut, Piano Gloss Walnut, Piano Gloss Black or Piano Gloss White

Made for

  • Stereo systems in mid to large-sized rooms
  • Mounting on the recommended FS8 stand
  • Front or surround channels of a premium home cinema
  • Listeners upgrading from stand-mounts to Special Production quality

Placement and set-up

  • Stereo: about 1.5 - 4.5 m (5 - 15 ft) apart
  • Ideally no closer than 0.5 m (20 in) to the rear wall and 1 m (3 ft) to the side walls
  • Experiment with toe-in towards the listener for the best stereo imaging
  • Use a stable stand able to carry the speaker's weight; Fyne Audio recommends its FS8 stand
  • Run in for around 100 hours at normal listening levels

In the box

  • F701SP loudspeakers with magnetic grilles
  • 8 self-adhesive feet and 4 bi-wire links (in the instruction manual bag)

Connections

  • Gold-plated bi-wire terminals: separate HF and LF pairs
  • Bi-wire links for single wiring
  • Earth / ground terminal connected to the driver chassis (optional use)
  • Accepts bare wire or 4 mm plugs

Finishes

  • Natural Walnut veneer
  • Piano Gloss Walnut (gloss lacquered walnut veneer)
  • Piano Gloss Black
  • Piano Gloss White

Fyne Audio F701SP: frequently asked questions

How does the F701SP differ from the F701?

It uses the IsoFlare driver from the F1-8, a redesigned and cryogenically treated crossover, higher-grade capacitors and wiring, upgraded gold-plated terminals and black anodised trims with a black metal plinth, plus the new Natural Walnut finish.

What amplifier suits the F701SP?

Fyne Audio recommends 30 - 180 W RMS into the 8 Ω nominal impedance. Power handling is 90 W RMS continuous and 360 W peak, with 90 dB sensitivity (2.83 V/1 m).

Can the F701SP be bi-wired?

Yes. Connect the bi-wire links for a single cable, or omit them and use two sets of cable or a dedicated bi-wire cable for the best possible sound quality. The optional earth terminal grounds RF interference; a dedicated screened loudspeaker cable gives the best results.

How long does running in take?

Fyne Audio recommends simply listening at normal levels for around 100 hours for the F700SP models to reach optimum performance.

Should I listen with the grille on or off?

The magnetically attached grille is designed for maximum transparency, but Fyne Audio recommends removing it for the best possible sound quality.

Where can I buy the Fyne Audio F701SP in India?

The Fyne Audio F701SP is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Stereo pair on FS8 stands

Music lovers building a Special Production stereo system in a mid to large-sized room.

Connections

ConnectTo
Integrated amplifier left speaker outputLeft F701SP terminals
Integrated amplifier right speaker outputRight F701SP terminals

Setup

  1. Place each speaker on a stable stand such as the FS8, using the self-adhesive feet between speaker and top plate if needed.
  2. Set the speakers about 1.5 - 4.5 m apart, ideally 0.5 m from the rear wall and 1 m from the side walls.
  3. With the amplifier switched off, connect the bi-wire links and wire positive to positive, negative to negative.
  4. Toe the speakers in towards the listening seat until the stereo image locks in.
  5. Remove the grilles and allow around 100 hours of normal listening to run them in.

Tip: Choose an amplifier in the 30 - 180 W RMS range.

Workflow 2: Bi-wired system with chassis earth

Listeners who want the last degree of detail and transparency.

Connections

ConnectTo
Amplifier outputs via two cable sets or a bi-wire cableF701SP HF and LF terminals, links removed
Screened cable screen or separate earth wireF701SP earth terminal

Setup

  1. Switch the amplifier off.
  2. Remove the bi-wire links.
  3. Wire each channel to the HF and LF pairs with two cable sets or a dedicated bi-wire cable.
  4. Optionally ground the earth terminal with a separate wire or, best, a screened loudspeaker cable.
  5. Check every connection for polarity before switching on.

Tip: Grounding the chassis stops radio frequency interference from reducing fine detail and resolution.

Workflow 3: Premium home cinema front or surround pair

Home theatre owners building a high-end system around an AV processor or receiver.

Connections

ConnectTo
Source with HDMIAV receiver or processor
Front or surround left / right outputsF701SP pair
Centre outputF57SP-6 or F57SP-8 centre channel
Subwoofer outputPowered subwoofer

Setup

  1. Place the F701SP pair on stands either side of the screen, or beside the seating as surrounds, toed in towards the main seat.
  2. Add an F57SP centre channel, designed to integrate with the F700-based models.
  3. Wire everything with the receiver switched off.
  4. Run the receiver's speaker set-up for levels, distances and crossover.

Tip: IsoFlare point source drivers across the front keep voices and effects seamless as they pan across the screen.

Workflow 4: Room with limited placement options

Homes where the speakers cannot stand far out into the room.

Connections

ConnectTo
Amplifier speaker outputsF701SP pair

Setup

  1. Place the speakers as far from the walls as the room allows, ideally at least 0.5 m from the rear wall.
  2. Let BassTrax spread the port output in a 360-degree wavefront.
  3. Move the speakers a little at a time with familiar bass-rich music until the bass sounds even.
  4. Fine-tune the toe-in for imaging.

Tip: BassTrax makes the F700SP models far less dependent on placement than conventional ported speakers.

Workflow 5: Vinyl and high-resolution streaming

Listeners who play records and stream high-resolution music.

Connections

ConnectTo
TurntableAmplifier phono input
Network streamerAmplifier line input
Amplifier speaker outputsF701SP pair

Setup

  1. Keep the turntable on a solid surface away from the speakers.
  2. Connect the turntable and the streamer to the amplifier.
  3. Keep the speakers on rigid, stable stands.
  4. Set the toe-in so vocals sit centrally between the speakers.

Tip: Clean the cabinets only with a microfibre cloth; never use solvents or abrasives, and avoid long exposure to direct sunlight.

Workflow 6: Upgrade from an F700 Series pair

Owners of the F701 moving up to Special Production.

Connections

ConnectTo
Existing amplifier speaker outputsF701SP pair

Setup

  1. Place the F701SP where the F701 stood; the cabinet design is the same F700 shape.
  2. Wire it as before, single-wired with the links or bi-wired.
  3. Allow around 100 hours of running in.
  4. Re-check toe-in and spacing after running in.

Tip: Choose the new Natural Walnut finish if you want the classic look of Fyne Audio's Vintage models.

Request a Quote

FYNE AUDIO F701SP

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›