FYNE AUDIO Vintage Classic VIII SM product guide and data sheet cover
‹
FYNE AUDIO Vintage Classic VIII SM product guide and data sheet coverFYNE AUDIO Vintage Classic VIII SM data sheet page 2: Back in the day never sounded so goodFYNE AUDIO Vintage Classic VIII SM data sheet page 3: IsoFlare point source driverFYNE AUDIO Vintage Classic VIII SM data sheet page 4: Energy and Presence controlsFYNE AUDIO Vintage Classic VIII SM data sheet page 5: Bi-wire, bi-amp and earthFYNE AUDIO Vintage Classic VIII SM data sheet page 6: Connections and specifications
›

Brand: FYNE AUDIO

FYNE AUDIO Vintage Classic VIII SM

PRICE ON ENQUIRY

Category: Bookshelf Speakers | Series: VINTAGE CLASSIC SERIES

Fyne Audio Vintage Classic VIII SM: 1970s-style 2-way standmount speaker with 8-inch IsoFlare driver, BassTrax, 34 Hz - 34 kHz, 91 dB. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

System type2-way, downward-firing port with BassTrax Tractrix diffuser
Nominal impedance8 Ω
Frequency response (-6 dB, typical in room)34 Hz - 34 kHz
Sensitivity (2.83 V/1 m)91 dB

Power

Recommended amplifier power30 - 180 W RMS
Continuous power handling90 W RMS
Peak power handling360 W

Drivers

Drive unit complement1 × 200 mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround, 25 mm magnesium dome compression tweeter, ferrite magnet system

Crossover

Crossover frequency1.8 kHz
Crossover typeBi-wired passive low loss, 2nd order low pass, 1st order high pass, Cryo-Lite treated
System adjustmentsHigh frequency energy (1.8 kHz - 34 kHz) ±3 dB; Presence (2.5 - 5.0 kHz) ±3 dB

Physical

Dimensions (H × W × D)540 × 330 × 294 mm (21.3 × 13.0 × 11.6 in)
Dimensions includeGrille and terminals
Net weight, each16.1 kg
Cabinet constructionHigh density fibreboard, walnut veneered, with extensive internal bracing
TerminalsBi-wire, with earth terminal
GrilleWood-framed woven cloth, magnetic
S-Trax position (from cabinet front edge)74 mm (2.9 in)
SuperTrax position (from cabinet front edge)50 mm (2.0 in)

Finishes

FinishWalnut

Product overview

The Fyne Audio Vintage Classic VIII SM is a 2-way standmount loudspeaker from the Vintage Classic Series, pairing 1970s-style looks (walnut veneer, black baffle, gold trim and analogue control knobs) with a 200 mm (8-inch) IsoFlare point source driver and the patented BassTrax Tractrix diffuser.

Taking us back to the golden days of traditional bookshelf loudspeaker design, the Vintage Classic VIII SM brings the nostalgic looks and rich performance of the Vintage Classic Series to a compact standmount that is easy to integrate into any room. Alongside its 200 mm (8-inch) IsoFlare driver, it uses a dedicated BassTrax porting implementation designed to give the best 360-degree bass wavefront while the speaker stands above floor level on stands.

The IsoFlare driver is a point source: the multi-fibre bass / midrange cone shares a common centre with the compression tweeter, so sound radiates isotropically with no nodes or lobes, and stereo imaging stays precisely focused on and off axis. The 25 mm magnesium dome compression tweeter uses a ferrite magnet system and crosses over at 1.8 kHz. A FyneFlute roll surround dissipates cone energy at the outer edge, and the driver is built on a rigid cast aluminium chassis coupled to the internal bracing through damping material.

BassTrax, slightly simplified for the Vintage Classic Series, ports the cabinet vertically at the base onto a mathematically shaped Tractrix diffuser cone. The bass leaves as a 360-degree wavefront through vents on all four sides, concealed behind grille cloth that wraps round the plinth. Bass is deep, articulate and tuneful, and the Classic VIII SM can stand nearer to side and rear walls than a conventional front or rear ported design.

The hand-built crossover is computer modelled, tuned by ear and hard wired on vibration-damping fibreboard, with low-loss laminated core inductors, precision resistors, polypropylene capacitors and silver-plated crystal OFC wiring, then Cryo-Lite treated (frozen to -170 °C and slowly thawed) to relieve micro-stresses. Bi-wire terminals allow single-wire, bi-wire or bi-amp connection, and an earth terminal grounds the driver chassis against radio frequency interference. On the baffle, weighted Energy and Presence knobs (each ±3 dB) sit on a gold panel printed with frequency response graphs.

The rectangular cabinet, wider than it is deep, is thick high-density fibreboard with a unique bracing structure, veneered in real walnut. The wood-framed grille uses a woven cloth whose colour and pattern were inspired by Scottish kilt fabrics, and attaches with hidden magnets to the front, or to the back for storage. Designed by Fyne Audio's engineers in Scotland, the Vintage Classic VIII SM suits music lovers who want classic style with modern sound.

Frequency response (-6 dB, typical in room) 34 Hz - 34 kHz
Sensitivity (2.83 V/1 m) 91 dB
Recommended amplifier power (RMS) 30 - 180 W
IsoFlare point source driver 8-inch

Key features

  • 2-way standmount loudspeaker with 1970s-inspired styling
  • 200 mm IsoFlare point source driver with multi-fibre cone and FyneFlute roll surround
  • 25 mm magnesium dome compression tweeter with ferrite magnet system
  • BassTrax Tractrix diffuser with 360-degree bass venting on all four sides
  • Hand-built crossover at 1.8 kHz, Cryo-Lite treated
  • Front-panel Energy and Presence knobs, each ±3 dB
  • Bi-wire terminals for single-wire, bi-wire or bi-amp connection, plus an earth terminal
  • High-density fibreboard cabinet with extensive internal bracing and real walnut veneer
  • Black baffle with anodised gold trim and frequency-graph control panel
  • Wood-framed woven-cloth grille with hidden magnets, storable on the rear
  • Dedicated BassTrax implementation for stand mounting

Made for

  • Stereo systems in small and medium rooms
  • Bookshelf or stand placement where a compact speaker is needed
  • Valve and solid-state amplifiers alike
  • Listeners who love classic hi-fi looks

Placement and set-up

  • Stereo: about 1.5 - 4.5 m apart
  • At least 0.5 m from the rear wall and no closer than 1 m to the side walls
  • Experiment with toe-in towards the listener for the best stereo imaging
  • Use a dedicated, stable, high-quality stand able to carry 16.1 kg; on a shelf or furniture, fit the self-adhesive feet
  • Start Energy and Presence at the centre, then make small adjustments
  • Remove the grilles for critical listening and store them magnetically on the rear

In the box

  • Vintage Classic VIII SM loudspeakers with magnetic woven-cloth grilles
  • Accessories box: 8 protective self-adhesive feet, 4 bi-wire links

Connections

  • Two pairs of gold-plated speaker terminals (HF and LF) for single-wire, bi-wire or bi-amp use
  • Bi-wire links supplied for single-wire connection
  • Earth (ground) terminal connected to the driver chassis
  • Accepts 4 mm banana plugs or spade connectors

Finishes

  • Walnut veneer with black baffle and gold trim

Fyne Audio Vintage Classic VIII SM: frequently asked questions

What amplifier suits the Vintage Classic VIII SM?

Fyne Audio recommends 30 - 180 W RMS into its 8 Ω nominal impedance; continuous power handling is 90 W RMS and peak power handling 360 W. With 91 dB sensitivity (2.83 V/1 m) it also suits lower-power valve amplifiers, which will simply limit maximum volume in large rooms.

Can it be bi-wired or bi-amped?

Yes. It has separate HF and LF terminals. Use the supplied links for single wire (best connected to the HF terminals), remove them for bi-wire with two cable sets or a bi-wire cable, or remove them and drive each section from its own amplifier.

What do the Energy and Presence knobs do?

Energy sets the tweeter level from the 1.8 kHz crossover upwards and controls how bright the sound is. Presence affects only 2.5 - 5.0 kHz, changing articulation, vocal clarity and image depth. Each gives ±3 dB; start both at the centre.

Do I need stands?

Fyne Audio strongly recommends a dedicated, high-quality stand that is stable and can carry the 16.1 kg speaker. If you place it on a bookshelf or furniture instead, fit the self-adhesive feet supplied to protect the surface.

Should I listen with the grilles on?

The magnetic grilles are designed for maximum transparency, but Fyne Audio recommends removing them for the best sound. They can be stored magnetically on the rear of the cabinet.

Where can I buy the Fyne Audio Vintage Classic VIII SM in India?

The Fyne Audio Vintage Classic VIII SM is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Stereo system on stands

Music lovers with a small or medium living room.

Connections

ConnectTo
Integrated amplifier left / right speaker outputsClassic VIII SM HF terminals (links fitted)

Setup

  1. Place each speaker on a stable, dedicated stand rated for its 16.1 kg weight.
  2. Set the stands about 1.5 - 4.5 m apart, ideally 0.5 m from the rear wall and 1 m from the side walls.
  3. With the amplifier off, connect to the HF terminals with the bi-wire links fitted, positive to positive and negative to negative.
  4. Toe the speakers in towards the listening seat until the image focuses.
  5. Remove the grilles for critical listening and store them on the rear.

Tip: The dedicated BassTrax porting of the SM is designed to work at its best with the speaker raised on stands.

Workflow 2: Bi-wired system

Listeners getting the most from one stereo amplifier.

Connections

ConnectTo
Amplifier left outputLeft speaker HF and LF terminals
Amplifier right outputRight speaker HF and LF terminals

Setup

  1. Switch the amplifier off and remove the bi-wire links.
  2. Run two sets of cable, or a dedicated bi-wire cable, to the HF and LF terminals.
  3. Terminate with good 4 mm banana plugs or spades.
  4. Check polarity at every terminal.

Tip: Fyne Audio states that bi-wiring gives the best possible sound quality.

Workflow 3: Vintage valve system

Owners of valve (tube) amplifiers who want a matching classic look.

Connections

ConnectTo
Valve amplifier 8 Ω outputsSpeaker terminals (links fitted)
TurntableAmplifier phono input or phono preamplifier

Setup

  1. Connect the turntable through a phono stage to the amplifier.
  2. Wire the amplifier to the speakers with the links fitted.
  3. Make use of the 91 dB (2.83 V/1 m) sensitivity for good levels from modest power.
  4. Fine-tune Presence for vocal clarity and image depth.

Tip: Amplifiers below the recommended minimum power will not damage the speakers; they limit maximum volume and dynamic range.

Workflow 4: Bookshelf or sideboard placement

Rooms where floor space for stands is not available.

Connections

ConnectTo
Amplifier speaker outputsSpeaker terminals

Setup

  1. Fit the four self-adhesive feet to the base of each speaker to protect the furniture.
  2. Place the speakers on a solid shelf or sideboard at similar heights.
  3. Keep space around the cabinet base so the BassTrax vents on all four sides can breathe.
  4. Adjust Energy and Presence to balance the sound in the room.

Tip: Fyne Audio recommends stands for optimum performance; furniture placement is the practical alternative.

Workflow 5: Bi-amplified system

Enthusiasts with two stereo power amplifiers or four monoblocks.

Connections

ConnectTo
PreamplifierLF and HF power amplifiers
LF power amplifierLF terminals of both speakers
HF power amplifierHF terminals of both speakers

Setup

  1. Remove the bi-wire links: they must not be fitted when bi-amping.
  2. Use one stereo amplifier for the LF sections and the other for the HF sections.
  3. Match the amplifier gains.
  4. Run an earth wire or screened cable to the earth terminals if radio interference is present.

Tip: Leaving the links in place while bi-amping can damage the amplifiers.

Workflow 6: Adding super tweeters

Classic VIII SM owners extending the system with Fyne Audio's add-on super tweeters.

Connections

ConnectTo
Speaker terminalsS-Trax or SuperTrax input

Setup

  1. Place an S-Trax on top of each cabinet 74 mm from the front edge, or a SuperTrax 50 mm from the front edge.
  2. Connect the super tweeter as described in its own manual.
  3. Set its level by ear with familiar recordings.
  4. Clean the cabinet with a microfibre cloth, never with solvents or abrasives.

Tip: Fyne Audio publishes these front-edge positions so each super tweeter lines up correctly with this model.

Request a Quote

FYNE AUDIO Vintage Classic VIII SM

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›