FYNE AUDIO Vintage Five product guide and data sheet cover
‹
FYNE AUDIO Vintage Five product guide and data sheet coverFYNE AUDIO Vintage Five data sheet page 2: A bold statement in a compact cabinetFYNE AUDIO Vintage Five data sheet page 3: BassTrax bassFYNE AUDIO Vintage Five data sheet page 4: Presence controlFYNE AUDIO Vintage Five data sheet page 5: Connections and specifications
›

Brand: FYNE AUDIO

FYNE AUDIO Vintage Five

PRICE ON ENQUIRY

Category: Bookshelf Speakers | Series: VINTAGE SERIES

Fyne Audio Vintage Five: compact walnut bookshelf speaker, 5-inch IsoFlare driver, BassTrax, Presence control, 46 Hz - 38 kHz. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

System type2-way, downward-firing port with BassTrax Tractrix diffuser
Nominal impedance8 Ω
Frequency response (-6 dB, typical in room)46 Hz - 38 kHz
Sensitivity (2.83 V/1 m)87 dB

Power

Recommended amplifier power30 - 100 W RMS
Continuous power handling50 W RMS
Peak power handling200 W

Drivers

Drive unit complement1 × 125 mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround, 19 mm magnesium dome compression tweeter, neodymium magnet system

Crossover

Crossover frequency1.9 kHz
Crossover typeSingle wired passive low loss, 2nd order low pass, 1st order high pass, Deep Cryogenically Treated
System adjustmentsPresence (2.5 - 5.0 kHz) ±3 dB

Physical

Dimensions (H × W × D)350 × 219 × 260 mm (13.8 × 8.6 × 10.2 in)
Net weight, each6.2 kg
Cabinet constructionPressed high density birch ply
TerminalsSingle wire, with earth terminal
S-Trax position (from cabinet front edge)53 mm (2.1 in)

Finishes

FinishWalnut

Product overview

The Fyne Audio Vintage Five is a compact 2-way bookshelf loudspeaker from the Vintage Series, combining a hand-crafted oiled walnut cabinet with a 125 mm (5-inch) IsoFlare point source driver, a 19 mm magnesium dome compression tweeter, the BassTrax downward-firing port and a front Presence control.

Like its larger siblings, the Vintage Five celebrates the cabinet finery of traditional loudspeakers alongside Fyne Audio's leading-edge engineering. Its hand-crafted enclosure is kept compact for easy integration into small and medium spaces, yet with 'no compromise' as the theme of the Vintage Series it carries the same advances: an IsoFlare driver with FyneFlute roll surround, BassTrax porting and hand-built, Deep Cryogenically Treated crossovers.

In the IsoFlare driver the multi-fibre bass / midrange cone shares a common centre with the tweeter, so sound radiates isotropically with constant directivity and stereo imaging stays precise even off axis. The highly rigid magnesium dome sits in a carefully optimised magnet assembly with a vented rear chamber that keeps resonance below the 1.9 kHz crossover and pushes break-up beyond the range of hearing, with a computer-optimised annular waveguide for a flat response. The FyneFlute surround, its geometry refined by finite element analysis, terminates cone energy and eliminates harmful resonances.

The port fires downwards onto a BassTrax Tractrix diffuser below the cabinet, which turns the bass into an expanding 360-degree wavefront that disperses evenly into the room and makes the speaker less critical of position. The single-wired crossover is computer optimised, tuned by ear, hard wired on fibreboard panels with laminated iron core inductors, high-grade polypropylene capacitors and silver-coated crystal OFC wiring, and cryogenically treated. An earth terminal grounds the driver chassis against radio frequency interference.

The cabinet is pressed high-density birch ply for a rigid, low-colouration structure, finished in oiled walnut with solid walnut trim. A front Presence dial (±3 dB, 2.5 - 5.0 kHz) refines the sound to the listening room. Designed and built in Scotland, the Vintage Five is a bold statement in a compact cabinet for desks, shelves and stands.

Frequency response (-6 dB, typical in room) 46 Hz - 38 kHz
Sensitivity (2.83 V/1 m) 87 dB
Recommended amplifier power (RMS) 30 - 100 W
IsoFlare point source driver 5-inch

Key features

  • Compact 2-way bookshelf speaker from the Vintage Series
  • 125 mm IsoFlare point source driver with multi-fibre cone and FyneFlute roll surround
  • 19 mm magnesium dome compression tweeter with neodymium magnet system
  • BassTrax Tractrix diffuser with downward-firing port for 360-degree bass
  • Hand-built, Deep Cryogenically Treated crossover at 1.9 kHz
  • Front Presence control, ±3 dB (2.5 - 5.0 kHz)
  • Gold-plated single-wire terminals with earth terminal
  • Pressed high-density birch ply cabinet
  • Oiled walnut with solid walnut trim, cared for with the supplied wood wax

Made for

  • Stereo systems in small and medium rooms
  • Desks, shelves and dedicated stands
  • Listeners who love traditional cabinet craftsmanship
  • Owners of Vintage Series floorstanders wanting the same look in a smaller room

Placement and set-up

  • Stereo: about 1.5 - 4.5 m apart, ideally 0.5 m from the rear wall and 1 m from the side walls
  • Experiment with toe-in towards the listener for the best imaging
  • For optimum performance use Fyne Audio's FS8 or FS6 stand with the optional Vintage Five top plates, or a rigid, well-damped stand
  • Set the drive unit at about ear height when seated
  • Without a stand, fit the self-adhesive feet to protect the surface
  • Start the Presence control at the centre, then make small adjustments

In the box

  • Vintage Five loudspeakers with grilles
  • 8 self-adhesive feet
  • 1 tin of wood wax

Connections

  • One pair of gold-plated speaker terminals (single wire)
  • Earth (ground) terminal connected to the driver chassis
  • Accepts 4 mm banana plugs or spade connectors

Finishes

  • Walnut: oiled walnut with solid walnut trim

Fyne Audio Vintage Five: frequently asked questions

What amplifier suits the Vintage Five?

Fyne Audio recommends 30 - 100 W RMS into its 8 Ω nominal impedance; continuous power handling is 50 W RMS and peak power handling 200 W, with 87 dB sensitivity (2.83 V/1 m).

Which stands should I use?

Fyne Audio strongly recommends its own FS8 or FS6 stands, ordered with the optional Vintage Five top plates. Any other stand should be rigid, well damped and stable enough for the speaker, with the drive unit at about seated ear height.

Can it be bi-wired?

No. The Vintage Five has a single set of speaker terminals plus an earth terminal. Connect positive to positive and negative to negative with the amplifier switched off.

What does the Presence control do?

It affects only the lower treble region of 2.5 - 5.0 kHz (±3 dB), influencing articulation, vocal clarity and image depth. Start in the central position and adjust with recordings you know well.

How do I care for the walnut?

Dust with a lint-free cloth such as muslin, and treat the oiled walnut sparingly with the supplied wood wax several times a year, keeping it off the baffle and grille cloth. Never use solvents or abrasives.

Where can I buy the Fyne Audio Vintage Five in India?

The Fyne Audio Vintage Five is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Stereo system on stands

Music lovers with a small or medium living room.

Connections

ConnectTo
Integrated amplifier left / right speaker outputsVintage Five terminals
Amplifier ground terminalEarth terminal (optional)

Setup

  1. Mount each speaker on a Fyne Audio FS8 or FS6 stand fitted with the Vintage Five top plate, following the stand's instructions.
  2. Place the stands about 1.5 - 4.5 m apart, ideally 0.5 m from the rear wall and 1 m from the side walls.
  3. With the amplifier off, connect positive to positive and negative to negative.
  4. Toe the speakers in towards the seat until the stereo image focuses.
  5. Set Presence to the centre and fine-tune with familiar recordings.

Tip: Choose an amplifier in the 30 - 100 W RMS range.

Workflow 2: Home office and desktop system

People who work from home and want fine sound at the desk.

Connections

ConnectTo
Computer or network streamerIntegrated amplifier
Amplifier speaker outputsVintage Five pair

Setup

  1. Fit the self-adhesive feet to protect the desk or shelf.
  2. Place a speaker either side of the screen, angled towards the chair, with the drive units near ear height.
  3. Connect the streamer or computer to the amplifier and the amplifier to the speakers.
  4. Use the Presence control to suit near-field listening.

Tip: BassTrax spreads bass evenly, so the speakers stay balanced close to walls and furniture.

Workflow 3: Vinyl corner

Record collectors with a turntable and a stereo amplifier.

Connections

ConnectTo
TurntablePhono input or phono preamplifier
Amplifier speaker outputsVintage Five pair

Setup

  1. Keep the turntable on a solid surface away from the speakers.
  2. Connect the turntable through the phono stage to the amplifier.
  3. Wire the speakers and set them on stands or shelves at similar heights.
  4. Adjust toe-in so voices sit centrally.

Tip: The point source IsoFlare keeps the image natural from a sofa off to one side.

Workflow 4: TV and music in a compact living room

Apartments where one stereo pair serves films and music.

Connections

ConnectTo
TV audio output (HDMI ARC or optical, as the amplifier provides)Stereo amplifier
Amplifier speaker outputsVintage Five pair

Setup

  1. Place a speaker either side of the TV on stands or a sturdy unit.
  2. Connect the TV to the amplifier's matching input.
  3. Wire the speakers to the amplifier.
  4. Set the TV to send its sound to the external output.

Tip: Raise Presence slightly if dialogue needs more clarity.

Workflow 5: Second room for a Vintage system

Owners of Vintage Series floorstanders furnishing a study or bedroom.

Connections

ConnectTo
Second amplifier or streaming amplifierVintage Five pair

Setup

  1. Choose a position about 1.5 - 4.5 m apart for the pair.
  2. Connect the amplifier to the speakers.
  3. Use stands or the self-adhesive feet as the room allows.
  4. Match the walnut care routine to your main speakers.

Tip: The Vintage Five shares the IsoFlare, BassTrax and cryogenic crossover technology of its larger siblings.

Workflow 6: Care and super tweeter

Vintage Five owners maintaining and extending their system.

Connections

ConnectTo
Speaker terminalsS-Trax input (optional)

Setup

  1. Dust the cabinets with a lint-free cloth such as muslin.
  2. Several times a year, treat the oiled walnut sparingly with the supplied wood wax, away from the baffle and grille cloth.
  3. To add a Fyne Audio S-Trax super tweeter, place it on top 53 mm from the cabinet's front edge.
  4. Avoid heat, humidity and direct sunlight.

Tip: Use the wood wax in a well-ventilated area and keep it away from children.

Request a Quote

FYNE AUDIO Vintage Five

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›