GENELEC 8361A
PRICE ON ENQUIRY
GENELEC 8361A SAM three-way coaxial studio monitor, 30 Hz - 43 kHz, 118 dB, GLM room calibration. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please DM us or call +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our trusted payment gateway partner.
General
| Type | SAM three‑way coaxial studio monitor (The Ones) |
| Drivers | Bass: Dual 263 x 137 mm obround (racetrack) cones; midrange: 130 mm cone (coaxial); treble: 25 mm metal dome (coaxial) |
| Crossover frequencies | 320 Hz and 2,800 Hz |
| Enclosure | Die‑cast aluminium, reflex port |
| Finishes | Dark Grey, Black, White |
Acoustic performance
| Lower cut‑off, -6 dB | 30 Hz |
| Upper cut‑off, -6 dB | 43 kHz |
| Accuracy of frequency response | ±1.5 dB (36 Hz - 20 kHz) |
| Short‑term max SPL | ≥118 dB SPL (sine, half space, 100 Hz‑3 kHz, 1 m) |
| Long‑term max SPL | 109 dB SPL (IEC weighted noise, 1 m) |
| Peak SPL per pair | 128 dB (music material, listening room, 1 m) |
| Self‑generated noise | ≤5 dB SPL (free space, 1 m, A‑weighted) |
| Harmonic distortion | At 95 dB SPL at 1 m: < 3 % (50‑100 Hz), < 0.5 % (above 100 Hz) |
| Group delay (Extended Phase Linearity off / on) | 4.2 ms / 8.6 ms |
Amplifiers and power
| Amplifiers | 700 W bass, 150 W midrange, 150 W treble (short term, Class D) |
| Amplifier system THD | < 0.05 % at nominal output |
| Mains voltage | 100‑240 VAC, 50/60 Hz |
| Power consumption | ISS active < 1.5 W, idle 20 W, full output (short term) 600 W |
Inputs and processing
| Analogue input | XLR female, balanced 10 kΩ |
| Maximum analogue input | +25.0 dBu |
| Analogue sensitivity | -6 dBu for 100 dB SPL at 1 m, adjustable +36 to -6 dBu |
| Digital input / thru | XLR, 110 Ω, AES/EBU single wire; 16‑24 bit, 32‑192 kHz |
| Digital sensitivity | -30 dBFS for 100 dB SPL at 1 m |
| Digital attenuation | 42 dB (DIP switches), 120 dB (GLM) |
| Control network | Proprietary GLM network, 2 x RJ45 (CAT5) |
| GLM frequency response adjustment | 16 parametric notch filters, 2 LF and 2 HF shelving filters |
| Room calibration | GLM AutoCal, GLM manual, stand‑alone |
Physical
| Height | 593 mm with Iso‑Pod, 570 mm without |
| Width | 357 mm |
| Depth | 347 mm |
| Weight | 31.9 kg |
| Acoustic axis | h1 = 308 mm, h2 = 201 mm |
| Mounting | Four M6 x 10 mm threaded holes on the back |
| Operating environment | Indoor, 15‑35 °C, 20‑80 % RH non‑condensing; 50 mm clearance behind, above and at the sides |
Product overview
The GENELEC 8361A is a SAM (Smart Active Monitor) three-way coaxial studio monitor from GENELEC's The Ones series: a true point source with GLM room calibration. The flagship of The Ones, with extremely high dynamic range and a short-term SPL of 118 dB for listening distances up to 5 metres in small to medium sized rooms.
A Minimum Diffraction Coaxial (MDC) midrange/tweeter driver and two Acoustically Concealed Woofers (ACW) share one acoustic axis, and the whole curved front of the die-cast aluminium enclosure works as a Directivity Control Waveguide (DCW). The result is extraordinary imaging, controlled directivity down to low bass and less listener fatigue over long sessions. Three Class D amplifiers (700 W, 150 W and 150 W) drive the bass, midrange and treble, and the free GLM software with AutoCal adapts the 8361A to your room for mono, stereo or immersive work. Typical listening distances are from under 1 m up to 5 m.
| Frequency response (-6 dB) | 30 Hz - 43 kHz |
| Short‑term max SPL | 118 dB |
| Class D tri‑amplification | 700 + 150 + 150 W |
| AutoCal room calibration | GLM |
Key features
- Three-way coaxial point source: MDC driver and two ACW woofers on one acoustic axis
- 30 Hz to 43 kHz (-6 dB), ±1.5 dB from 36 Hz - 20 kHz
- 118 dB short-term SPL, 128 dB peak per pair
- Tri-amplified: 700 W bass, 150 W midrange and 150 W treble, all Class D
- Analogue and AES/EBU inputs: a balanced analogue XLR input, an AES/EBU digital XLR input and a digital thru (32-192 kHz)
- Smart Active Monitoring: 16 parametric notch filters and 2 LF + 2 HF shelving filters set by GLM AutoCal
- Two GLM network ports for calibration and daily monitor control
- Stand-alone controls: bass roll-off, desktop, bass tilt, treble tilt, level and input selection
- Very low self-generated noise: 5 dB SPL or less
- Intelligent Signal Sensing (ISS) automatic power saving
- Die-cast aluminium MDE enclosure with reflex port and the Iso-Pod vibration-isolating stand
- Finishes: Dark Grey, Black, White
A true point source
In the 8361A every driver radiates from the same acoustic centre. The coaxial driver has no acoustic discontinuities between the tweeter and the midrange cone, so there is no diffraction and the response stays smooth on and off axis. The two 263 x 137 mm woofers radiate through openings at the ends of the front and sum acoustically on the same axis, so directivity is controlled down to low bass and the monitor interacts less with the room.
Calibrated to your room with GLM
Connect the 8361A to the GLM network, place the GENELEC measurement microphone at the listening position and GLM AutoCal sets level, distance delay and room response compensation for every monitor and subwoofer. Settings can be stored in the monitor so a computer is needed only for setup, or GLM can stay connected as a monitor controller for switching sets of loudspeakers, solo, mute and calibrated listening levels. Calibration needs the free GLM software and either the 9320A SAM Reference Controller or the GLM Calibration Kit (each sold separately).
Works without a computer too
DIP switches on the back set bass roll-off (-2/-4/-6 dB), desktop compensation (-4 dB at 160 Hz), bass tilt (-2/-4/-6 dB below 800 Hz), treble tilt (+2/-2/-4 dB above 5 kHz), input level, AES/EBU channel, the front light and ISS. A rotary level control completes a 42 dB adjustment range, and the STORED switch recalls the settings saved by GLM.
Built for long sessions
The die-cast aluminium Minimum Diffraction Enclosure is stiff, well damped and a good heat sink for the amplifiers. The Iso-Pod stand tilts the monitor towards the listener and isolates vibration from the desk or stand, and the 8361A can be used vertically or horizontally, on stands or on wall and ceiling mounts (four m6 x 10 mm threaded holes on the back).
In the box
- GENELEC 8361A monitor
- Mains cable (1.8 m)
- RJ45 GLM network cable (5 m)
- Second Iso-Pod retainer spring for horizontal mounting
- Operating manual
- The Ones brochure
GLM calibration needs the free GLM software and the 9320A SAM Reference Controller or the GLM Calibration Kit (sold separately).
GENELEC 8361A: frequently asked questions
Does the 8361A need GLM?
No. It works stand-alone with its rear DIP switches and level control. It reaches its full potential when calibrated with the free GLM software, which GENELEC recommends.
Can the 8361A take a digital signal?
Yes. It has an AES/EBU digital input (16-24 bit, 32-192 kHz) and a digital thru for daisy-chaining up to four monitors, besides the balanced analogue XLR input.
Can I add a subwoofer?
Yes. GENELEC recommends the 7300 series subwoofers or the W371A adaptive woofer system for the 8361A, calibrated together in GLM.
Where is the 8361A made?
GENELEC monitors are designed, hand-built and individually tested and calibrated at the GENELEC factory in Iisalmi, Finland.
Where can I buy the GENELEC 8361A in India?
The GENELEC 8361A is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Stereo nearfield pair calibrated with GLM
Set up two monitors in a mixing room and let GLM correct level, delay and room response.
Connections
| Connect | To |
|---|---|
| Interface or console outputs | ANALOG IN (XLR) of the left and right 8361A |
| GLM network | RJ45 cable from monitor to monitor, then to the GLM adapter |
| GLM adapter | USB port of the Mac or Windows computer |
| Measurement microphone | GLM adapter microphone input, at the listening position |
Setup
- Place the monitors symmetrically and aim the acoustic axes at the listening position.
- Connect the GLM network and the adapter, and install the free GLM software.
- Run AutoCal with the microphone at ear height, pointing upwards.
- Check the result, then store the settings in the monitors or keep GLM as a monitor controller.
Tip: Avoid placing the monitors 1.0-2.2 m in front of a hard wall: the reflection can reduce the bass.
Workflow 2: Stand-alone setup without a computer
Use the monitors straight away with the rear DIP switches and level control.
Connections
| Connect | To |
|---|---|
| Analogue source | ANALOG IN (XLR) |
| Mains | MAINS INPUT, 100‑240 V~ |
Setup
- Make sure the GLM network is not connected and set the STORED switch to OFF.
- Choose the room settings: for example bass tilt -2 dB and desktop -4 dB for a monitor near-field on a reflective surface.
- Set the input sensitivity with the LEVEL switches and the rotary control.
- Use ISS to let the monitor sleep automatically when no signal is present.
Tip: In a corner, GENELEC suggests bass tilt -4 dB and bass roll-off -4 dB as a starting point.
Workflow 3: All-digital AES/EBU chain
Feed the monitors digitally from an interface, console or monitor controller with AES/EBU outputs.
Connections
| Connect | To |
|---|---|
| AES/EBU source | DIGITAL IN (AES/EBU XLR) of the first monitor |
| Next monitor | DIGITAL THRU of the first monitor to the digital input of the next (up to four) |
Setup
- Connect the AES/EBU cable; a valid digital signal is selected automatically.
- Select channel A or B on each monitor with the DIGITAL switches or in GLM.
- Keep the source level high and lower the level on the monitors for full digital resolution.
- Calibrate with GLM as usual.
Tip: Selecting both A and B plays the sum of the two channels with 6 dB of attenuation.
Workflow 4: Immersive monitoring system
Build a surround or immersive room with several monitors managed as one GLM system.
Connections
| Connect | To |
|---|---|
| Multichannel interface | One output per 8361A, analogue or AES/EBU |
| GLM network | All monitors and subwoofers daisy‑chained to the GLM adapter |
Setup
- Mount the monitors on stands, walls or ceiling at the planned positions.
- Aim each acoustic axis at the listening position.
- Run GLM AutoCal: it aligns level, time of flight and room response of every monitor and subwoofer.
- Create GLM groups for stereo and immersive listening and switch between them.
Tip: Use the four m6 x 10 mm threaded holes on the back for wall and ceiling mounts from the GENELEC accessory range.
Workflow 5: Adding low-frequency extension
Extend the bass or add bass management for multichannel work.
Connections
| Connect | To |
|---|---|
| Subwoofer or woofer system | The 7300 series subwoofers or the W371A adaptive woofer system |
| GLM network | Subwoofer connected to the same GLM network |
Setup
- Place the low-frequency system as recommended by GENELEC.
- Connect it to the GLM network with the monitors.
- Run AutoCal: GLM calibrates the monitors and the subwoofer together, including crossover phase.
- Listen and fine-tune the levels in GLM if needed.
Tip: The GENELEC online Product Selection Tool helps choose matching products.
Workflow 6: Desktop or meter-bridge placement
Use the monitors on a desk or console where the surface reflects sound.
Connections
| Connect | To |
|---|---|
| Monitor | On its Iso‑Pod stand, tilted towards the listener |
Setup
- Slide the Iso-Pod along the enclosure to tilt the acoustic axis towards your ears.
- Switch on the DESKTOP control (-4 dB at 160 Hz) when not using GLM.
- Keep at least 50 mm free behind, above and at the sides for cooling.
- Where possible, use stands behind and above the console instead of the meter bridge.
Tip: Symmetrical placement of nearby reflecting objects keeps the stereo image balanced.
