









PRIMARE Allt-i-Ett
PRICE ON ENQUIRY
Primare Allt-i-Ett all-in-one sound system: streamer, 300 W peak DSP amplifier and ten-driver array, HDMI eARC, subwoofer out, Room EQ. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
General
| Type | All-in-one sound system: multi-source streamer, amplifier and speaker system in one cabinet |
| Interface | 1 × fixed touchscreen display; 1 × motorised display |
| Control | Touch Control, volume control and touch buttons; PRISMA remote; Prisma app |
Speaker array
| Woofers | 6 × 4-inch (2 front-firing, 2 rear-firing, 2 down-firing) |
| Midrange drivers | 2 × 4-inch |
| Tweeters | 2 × 0.75-inch silk dome, waveguide |
| Crossover | Active digital crossover for the bass from 200 Hz; passive crossover for midrange and treble |
Amplifier
| Amplifier output | 300 W peak |
| Amplifier type | DSP-controlled, four amplifier channels, two-way: 2 for midrange / tweeter sections, 2 for woofer arrays |
DSP
| Position options | Free standing, near wall, corner |
| Room correction | Auto Room EQ in the Prisma app |
| Graphic equaliser | 11-band, ±6 dB |
| Spatial audio | 3D spatial audio setting with crosstalk cancellation |
| Loudness compensation | Yes |
Direct inputs
| HDMI | eARC / CEC: stereo PCM up to 24/48 kHz |
| Optical digital | 2 ×, up to 32/192 kHz |
| Coaxial digital | 1 ×, up to 32/192 kHz |
| Analogue | 1 × stereo pair, line or MM phono, with ground lug |
| Radio | FM and DAB+ |
| USB | 1 × USB-A |
| File types | AAC, AIF, AIFF, DSF, DFF, M4A, MP3 / MP4, ALAC, FLAC, WAV, APE, WMA, OGG |
| Resolution | PCM up to 768 kHz / 32-bit; DSD up to DSD512 |
| File systems | FAT32, exFAT, NTFS |
| Drive capacity | Up to 2 TB with FAT32 |
Streaming
| Wi-Fi | Wi-Fi 6: 2.4 GHz 802.11b / g / n / ax; 5 GHz 802.11a / n / ac / ax |
| LAN | 10/100 Mbps, dual sockets: 1 × in, 1 × out |
| Prisma | Internet radio (MP3 default); hi-res streaming services up to 24/192 kHz; NAS: PCM up to 768 kHz / 32-bit, DSD up to DSD512 |
| Network playback | UPnP / DLNA |
| Bluetooth | Version 5.0, A2DP 1.3, AVRCP 1.6 |
| Bluetooth receiver codecs | SBC, AAC, aptX, aptX HD |
| Bluetooth transmitter (headphones) | SBC, aptX |
| AirPlay 2 | Yes |
| Connect streaming | Built-in Connect support for three popular streaming services |
Outputs and control
| Headphone | 3.5 mm: 32 Ω at 30 mW |
| Subwoofer output | With bass management: gain -12 dB to +12 dB, crossover 10 Hz - 150 Hz |
| Antenna | 1 × FM / DAB+ antenna socket |
| Control | 1 × trigger out; 1 × 3.5 mm IR out; 1 × 3.5 mm service port |
Power
| Mains | Multi-voltage: 100-120 V, 220-240 V |
| ECO standby | < 0.5 W (remote control or manual power on) |
| Normal standby | < 5 W (app power on) |
| Operating | 18 W, < 300 W |
Physical
| Dimensions (W × D × H) | 690 × 303 × 150 mm |
| Height with display fully raised | 230 mm |
| Weight | 16 kg |
| Finish | Blackwood |
Product overview
The Primare Allt-i-Ett is a complete high-performance sound system in one compact cabinet: a multi-source streamer, a DSP-controlled amplifier with 300 W peak output and a ten-driver speaker array, designed for everyone in the household to explore, discover and share high-fidelity music and movies anywhere in the home.
Allt-i-Ett (“all-in-one” in Norwegian and Swedish) is made for those who may not have the space or the wish for separate components, and for those who already enjoy a full-scale audio system but want uncompromised sound in other rooms of the home. With flexible inputs and outputs, several high-resolution streaming options and advanced digital signal processing, it delivers rich, room-filling sound from a single cabinet.
The speaker array has six 4-inch low-frequency drivers (two front-firing, two rear-firing and two down-firing), two 4-inch midrange drivers and two 0.75-inch waveguide tweeters. All of them are custom-designed and purpose-built for the Allt-i-Ett, in a proprietary polymer material that gives each driver type the lightness and stiffness it needs. A DSP-controlled, four-amplifier, two-way system drives them: two channels feed the left and right midrange and tweeter sections, two power the left and right woofer arrays, an active digital crossover manages the bass frequencies from 200 Hz and a passive crossover optimises the midrange and treble.
The long-excursion woofers have a low tuning frequency for powerful, controlled bass even at low power levels, and the woofers of each side share one chamber, tuned with a precisely measured amount of damping material. Each midrange driver sits in its own isolated chamber with non-parallel walls to minimise internal reflections, while the waveguide aligns the dispersion of the silk dome tweeter with that of the midrange for smooth, balanced sound on and off axis. A cardioid-shaped rear chamber controls the tweeter's back-wave energy without overdamping.
Fully integrated DSP adapts the sound to the room and the listener. Placement settings compensate for a nearby wall or corner, loudness compensation keeps the sound full at low levels, Auto Room EQ in the Prisma app calibrates the system to the room, an 11-band graphic equaliser allows manual fine-tuning, and a 3D spatial audio setting uses crosstalk cancellation to reveal the natural spatial cues in stereo recordings. The output of the Allt-i-Ett was analysed with an automated 3D near-field scanning system to decide where the DSP should intervene.
With an HDMI eARC input and a subwoofer output with full bass management, the Allt-i-Ett is an alternative to a conventional soundbar for cinematic TV sound. It streams over Wi-Fi 6 or Ethernet with AirPlay 2, Bluetooth, UPnP / DLNA, internet radio and popular hi-res streaming services, plays music from USB storage and network drives, receives FM and DAB+ radio, and has optical, coaxial and analogue / MM phono inputs for CD transports, gaming consoles and turntables. A wired headphone output and a Bluetooth transmitter for wireless headphones allow private listening.
| Amplifier output, peak, DSP-controlled | 300 W |
| 6 woofers, 2 midrange, 2 waveguide tweeters | 10 drivers |
| TV sound with CEC, plus subwoofer output | HDMI eARC |
| PCM from USB and network; DSD512 | 768 kHz / 32-bit |
Key features
- All-in-one: multi-source streamer, amplifier and speaker system in one compact cabinet
- Ten-driver speaker array: six 4-inch woofers (two front-, two rear- and two down-firing), two 4-inch midrange drivers, two 0.75-inch waveguide tweeters
- DSP-controlled amplifier: four channels, two-way, 300 W peak output
- Placement settings for free, wall or corner standing, and loudness compensation
- Auto Room EQ in the Prisma app, 11-band graphic equaliser and a 3D spatial audio setting with crosstalk cancellation
- HDMI eARC with CEC for TV sound, and a subwoofer output with full bass management
- Streaming over Wi-Fi 6 or Ethernet: AirPlay 2, UPnP / DLNA, internet radio and popular hi-res streaming services up to 24-bit/192 kHz
- Bluetooth 5.0 receiver (SBC, AAC, aptX, aptX HD) and transmitter for wireless headphones (SBC, aptX)
- USB-A and network playback up to PCM 768 kHz / 32-bit and DSD512
- FM and DAB+ radio, with six presets on the touchscreen
- Two optical, one coaxial and one analogue / MM phono input with ground lug
- Fixed touchscreen, motorised information display, large volume control and the PRISMA remote
Made for
- Living rooms: cinematic TV sound from one HDMI eARC cable, with an optional subwoofer
- Homes without the space for separate hi-fi components
- Second rooms of a home that already has a full-scale audio system
- Bedrooms: albums and podcasts in rich detail, and private listening on headphones
- Kitchens and open-plan living and dining areas
- Turntables, CD transports and gaming consoles through the phono, coaxial and optical inputs
In the box
- Allt-i-Ett
- Mains cable
- Trigger cable
- Antenna for DAB and FM
- PRISMA remote with batteries
- AC polarity pen
Connections
- HDMI eARC input with CEC (stereo PCM up to 24/48 kHz)
- 2 × optical digital input (up to 32/192 kHz)
- 1 × coaxial digital input (up to 32/192 kHz)
- 1 × stereo RCA analogue or MM phono input, with ground lug (GND)
- 1 × USB-A input for storage up to 2 TB
- LAN IN and LAN OUT Ethernet sockets (10/100 Mbps), Wi-Fi 6 and Bluetooth 5.0
- FM / DAB+ antenna socket
- Subwoofer output with bass management
- 3.5 mm headphone output (32 Ω at 30 mW) on the right side
- Trigger output, 3.5 mm IR output and 3.5 mm service port
- Mains inlet and power switch
Primare Allt-i-Ett: frequently asked questions
Can the Allt-i-Ett be the sound system for my TV?
Yes. Connect the TV's HDMI eARC socket to the eARC input with one HDMI cable; a TV with ARC also works, and a TV without either can use its optical output. CEC lets the TV control the volume of the Allt-i-Ett and bring it out of standby, and a subwoofer can be added at the subwoofer output.
Can I add a subwoofer?
Yes. The subwoofer output has full bass management: SUB GAIN sets the level from -12 dB to +12 dB (0 dB default) and SUB FREQ the crossover frequency from 10 Hz to 150 Hz (40 Hz default). The supplied trigger cable switches a subwoofer with a trigger input on and to standby with the Allt-i-Ett.
How does Auto Room EQ work?
In the Prisma app the Allt-i-Ett plays pink noise for 30 to 60 seconds while you move a phone or tablet, or the Primare Zen microphone, around the room from 1.5 m or more away. The app calculates a correction for the room and applies it. Some phones and tablets measure with their own microphone; others need the Zen microphone, available separately, which can also improve the results with any device.
Can I listen on headphones?
Yes: wired headphones with a 3.5 mm plug connect to the socket on the right side (32 Ω at 30 mW), and Bluetooth headphones pair when BLUETOOTH MODE is set to TRANSMITTER (SBC and aptX). The speakers are muted automatically when headphones are connected.
Where should the Allt-i-Ett be placed?
Free standing, against a wall or in a corner: choose FREE STANDING, WALL STANDING or CORNER STANDING in the PLACEMENT setting and the DSP compensates for the bass boost of the room boundaries. Then run Auto Room EQ for the room itself.
Where can I buy the Primare Allt-i-Ett in India?
The Primare Allt-i-Ett is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Living-room TV sound over HDMI eARC
Families who want cinematic TV sound from one compact unit below the TV.
Connections
| Connect | To |
|---|---|
| TV HDMI eARC (or ARC) socket | Allt-i-Ett eARC input, HDMI cable |
| Allt-i-Ett LAN OUT | TV Ethernet port (optional daisy-chain) |
Setup
- Place the Allt-i-Ett below the TV and set PLACEMENT to FREE STANDING, WALL STANDING or CORNER STANDING to match its position.
- Connect the TV's eARC or ARC socket to the eARC input with an HDMI cable; a TV without either can use its optical output to an optical input.
- In INPUT SETTINGS, eARC, CEC SETTINGS, switch HDMI CEC on and choose FOLLOW POWER-ON FROM TV, FOLLOW POWER-OFF FROM TV and FOLLOW SOURCE SWITCH.
- Use the TV remote for volume through CEC, or the PRISMA remote, which also gives basic control of most current TVs.
- Run Auto Room EQ from the Prisma app once the furniture is in place.
Tip: LAN OUT daisy-chains the network connection to the TV, so one Ethernet cable serves both.
Workflow 2: Open-plan room with a subwoofer
Larger living, dining or kitchen spaces that need deeper bass at higher volumes.
Connections
| Connect | To |
|---|---|
| Allt-i-Ett SUB OUT | Active subwoofer input |
| Allt-i-Ett TRIG OUT, supplied trigger cable | Subwoofer TRIG IN |
Setup
- Connect SUB OUT to the input of an active subwoofer.
- If the subwoofer has a trigger input, connect it to TRIG OUT with the supplied trigger cable so it switches on and to standby with the Allt-i-Ett.
- In AUDIO SETTINGS, SUBWOOFER OUTPUT, set SUBWOOFER OUTPUT to ENABLED.
- Set SUB FREQ between 10 Hz and 150 Hz (40 Hz default) and SUB GAIN between -12 dB and +12 dB.
- When running Room EQ, enter the subwoofer's natural roll-off from its specification instead of 35 Hz.
Tip: The subwoofer takes over the deep bass, so the internal drivers work more efficiently and cleanly at higher volumes.
Workflow 3: Streaming in a second room
Homes with a main hi-fi that want uncompromised sound in a bedroom, kitchen or study.
Connections
| Connect | To |
|---|---|
| Home router or switch | Allt-i-Ett LAN IN, or Wi-Fi 6 |
| NAS drive on the same network | Prisma app library |
Setup
- Connect LAN IN to the router with an Ethernet cable, or touch WIFI SETUP in the SETTINGS menu and join the main Wi-Fi network, not a guest network.
- Download the Primare PRISMA app and select the Allt-i-Ett.
- Play internet radio, popular hi-res streaming services or music from a NAS drive through the app.
- Stream from phones and tablets with AirPlay 2, Bluetooth or the Connect feature of a streaming service's own app.
- Save favourite internet radio stations to the six presets.
Tip: For the best results connect the Allt-i-Ett to the router with an Ethernet cable; Ethernet takes priority over Wi-Fi.
Workflow 4: Vinyl corner with a turntable
Record lovers who want a turntable and streaming in one compact system.
Connections
| Connect | To |
|---|---|
| Turntable with moving magnet cartridge, RCA cable | A1 / PHONO input |
| Turntable ground wire | GND terminal |
Setup
- Connect the turntable's RCA cable to the A1 / PHONO input.
- Connect the cable screening or ground wire to the GND terminal for the lowest noise.
- In INPUT SETTINGS, A1, set A1 OR PHONO to PHONO.
- Adjust INPUT GAIN (-12 dB to +12 dB) so the turntable plays at the same volume as the other sources.
- Give the input an ALIAS of up to six characters so it is easy to find on the SOURCE screen.
Tip: PHONO is for moving magnet cartridges; set A1 for a line-level analogue source.
Workflow 5: Late-night listening on headphones
Bedroom and shared-home listeners who do not want to disturb others.
Connections
| Connect | To |
|---|---|
| Wired headphones, 3.5 mm plug | Headphone socket on the right side |
| Bluetooth headphones | Allt-i-Ett Bluetooth transmitter |
Setup
- For wired headphones, plug into the 3.5 mm socket on the right side, between the speaker baffle and the side panel.
- For wireless headphones, set BLUETOOTH MODE to TRANSMITTER in BLUETOOTH SETTINGS and touch ADD NEW DEVICES.
- Touch the headphones in the list; the sound now plays through them.
- Set BLUETOOTH DEFAULT VOLUME and BLUETOOTH MAXIMUM VOLUME to comfortable levels.
- Set BLUETOOTH MODE back to RECEIVER to stream from a phone again.
Tip: The speakers are muted automatically when headphones are connected.
Workflow 6: Kitchen radio with presets
Households who want radio and playlists at a touch while cooking and dining.
Connections
| Connect | To |
|---|---|
| Supplied FM / DAB antenna | ANT FM / DAB+ socket |
| Phone with the Prisma app | Allt-i-Ett over Wi-Fi |
Setup
- Screw the supplied antenna in by hand, extend it fully and position it vertically.
- Touch FM on the Touch Control and scan with >> or << to the next station.
- Long-touch one of the six preset circles to save the station.
- Recall presets on the touchscreen or with buttons 1 to 6 on the PRISMA remote, which also wake the Allt-i-Ett from standby.
- If reception is weak, set STEREO OR MONO to MONO in the FM input settings.
Tip: Internet radio stations from the Prisma app can be stored on the same six presets.








