





PRIMARE MM15
PRICE ON ENQUIRY
Primare MM15: moving magnet phono module for the I15, hybrid passive/active EQ, 47 kΩ / 150 pF, fits at any time. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
General
| Type | Moving magnet phono preamplifier module |
| Fits | Primare I15 integrated amplifier only |
| Circuit | Ultra-low-noise, high-speed hybrid passive and active EQ |
| Cartridges | Moving magnet and high-output moving coil |
| Input | Replaces line-level input A1 (becomes PHONO) |
Performance
| Gain at 1 kHz | 40.5 dB |
| Gain, speaker out | 83 dB |
| Resistance loading | 47 kΩ |
| Capacitive loading | 150 pF |
| RIAA correction | ±0.2 dB |
| Signal to noise | 78 dB |
Product overview
The Primare MM15 is an optional moving magnet phono preamplifier module for the I15 integrated amplifier, which can be installed at any time to add a turntable input.
The MM15 uses an ultra-low-noise, high-speed hybrid passive and active EQ phono amplification circuit, designed to work with the latest generation of moving magnet and high-output moving coil cartridges for exemplary turntable playback. It is made for the I15 only: an I15 with the module fitted is the I15 MM.
The module plugs onto two header plugs on the I15 main board and is fixed with four screws supplied with it. Fitting means opening the I15 case, cutting three wire links (JP1, JP2 and JP3) that disconnect the line-level A1 input, and moving a shorting block to add RIAA equalisation. Once the case is closed again, the A1 input label changes to PHONO, confirming that the board has been recognised.
With a phono gain of 40.5 dB at 1 kHz, 47 kΩ resistance and 150 pF capacitive loading and RIAA correction within ±0.2 dB, the MM15 turns the compact I15 into a complete analogue system for vinyl, CD and other line sources. The line-level A1 input can be restored later by re-joining the three links, so the change is reversible.
Key features
- Moving magnet phono stage for the I15 integrated amplifier
- Ultra-low-noise, high-speed hybrid passive and active EQ circuit
- For moving magnet and high-output moving coil cartridges
- 47 kΩ / 150 pF loading, RIAA correction ±0.2 dB
- Plugs onto the I15 board; can be installed at any time
- A1 input becomes PHONO; reversible by re-joining three links
Made for
- I15 integrated amplifier owners adding a turntable
- Turntables with moving magnet or high-output moving coil cartridges
- Compact vinyl systems in living rooms and bedrooms
In the box
- MM15 phono module board
- 4 × Posidriv mounting screws
Primare MM15: frequently asked questions
Which amplifier does the MM15 fit?
The MM15 is for the Primare I15 integrated amplifier only. It replaces the line-level function of input A1, which becomes the PHONO input.
Which cartridges can I use?
It is designed for the latest generation of moving magnet cartridges and high-output moving coil cartridges. It offers 47 kΩ resistance and 150 pF capacitive loading.
What is needed to install it?
A #10 Torx screwdriver, flush diagonal wire cutters, a static-free working area and an anti-static wrist strap. Unplug the mains first, as dangerous voltages are present inside the I15. Installation by a qualified technician is a good idea if you are not confident working inside equipment.
Where can I buy the Primare MM15 in India?
The Primare MM15 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Adding a turntable to an I15
I15 owners starting a vinyl corner in the living room.
Connections
| Connect | To |
|---|---|
| Turntable (MM or high-output MC cartridge) | I15 input A1 (PHONO) |
Setup
- Unplug the mains and remove the eight Torx screws holding the I15 case.
- Cut links JP1, JP2 and JP3 and move the RIAA shorting block to the lower position.
- Plug the MM15 onto the two header plugs and fix it with the four screws supplied.
- Refit the case and check that input A1 now shows PHONO.
- Connect the turntable to input A1.
Tip: Wear the anti-static wrist strap clipped to the I15 case while working inside.
Workflow 2: Going back to a line input
Owners who later move to an outboard phono preamplifier.
Connections
| Connect | To |
|---|---|
| Outboard phono preamplifier or line source | I15 input A1 (line level again) |
Setup
- Unplug the mains and open the I15 case.
- Remove the MM15 board.
- Re-join links JP1, JP2 and JP3 with a blob of solder each and return the RIAA shorting block.
- Close the case; A1 works as a line-level input again.
Tip: Leaving the cut links in place during installation makes this change easy.








