PRIMARE R15 product guide and data sheet cover
‹
PRIMARE R15 product guide and data sheet coverPRIMARE R15 data sheet page 2: The ideal interface for vinylPRIMARE R15 data sheet page 3: Technology insidePRIMARE R15 data sheet page 4: ConnectionsPRIMARE R15 data sheet page 5: Matching the cartridgePRIMARE R15 data sheet page 6: Set-up and everyday usePRIMARE R15 data sheet page 7: Building a 15 Series systemPRIMARE R15 data sheet page 8: Specifications
›

Brand: PRIMARE

PRIMARE R15

PRICE ON ENQUIRY

Category: Phono Preamplifiers | Series: 15 SERIES

Primare R15 compact MM/MC phono preamplifier: switchable gain, DIP-switch impedance and capacitance loading, subsonic filter and trigger. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

TypeMM/MC phono preamplifier, 15 Series
Cartridge typesMoving magnet (MM) and moving coil (MC)

Inputs and outputs

Inputs2 × RCA (1 stereo pair)
Outputs2 × RCA (1 stereo pair), 100 Ω
Maximum output level11 V rms
GroundGND terminal
TriggerTRIG IN and TRIG OUT, 3.5 mm mono jack

Performance

Gain at 1 kHz, MM (RCA)Adjustable 40, 45 dB
Gain at 1 kHz, MC (RCA)Adjustable 60, 65 dB
Impedance loading, MMAdjustable 2.5, 47 kΩ
Impedance loading, MCAdjustable 30 Ω - 500 Ω (6 steps)
Capacitive loading, MMAdjustable 100, 200, 300, 400 pF
Capacitive loading, MCAdjustable 100 pF, 1 nF
Channel separationMM: 80 dB at 1 kHz; MC: 77 dB at 1 kHz
THD + noiseMM: < 0.02 %, 20 Hz - 20 kHz; MC: < 0.03 %, 20 Hz - 20 kHz
Signal to noise ratio, MM83 dB (1 kHz, A-weighted, 5 mV input)
Signal to noise ratio, MC74 dB (1 kHz, A-weighted, 0.5 mV input)
Subsonic filter-3 dB at 12 Hz, 12 dB/octave
RIAA correction± 0.2 dB

Power

Power consumption, standby< 0.5 W
Power consumption, operating< 20 W
Automatic standbyAfter 20 minutes without signal (can be disabled)

Physical

Dimensions (W × D × H)350 × 313 × 73 mm with knobs and connectors
Weight6.5 kg
ColourBlack or titanium

Versions

R15-BLACKBlack
R15-TITANIUMTitanium

Product overview

The Primare R15 is a compact MM/MC phono preamplifier from the 15 Series, providing the ideal interface between the low-level output of a moving-magnet or moving-coil cartridge and the line-level inputs of a hi-fi system.

The R15 is designed to amplify, with honest fidelity, the delicate signal from any cartridge it is paired with. Although it is housed in the compact three-quarter-width 15 Series cabinet, the same care and craft that went into the larger R35 MM/MC phono preamplifier informed its design layout, so that all circuits work sympathetically together for superior sound and greater fidelity.

There is sufficient gain for virtually any moving-magnet or moving-coil cartridge: 40 or 45 dB for MM and 60 or 65 dB for MC, chosen with switches on the back panel. Very flexible input adjustment allows ideal system matching: DIP switches, one set for each channel, select the resistive load (2.5 or 47 kΩ for MM; 30, 50, 75, 100, 200 or 500 Ω for MC) and the capacitive load (100, 200, 300 or 400 pF for MM; 100 pF or 1 nF for MC).

RIAA correction is held within ± 0.2 dB, a subsonic filter (-3 dB at 12 Hz, 12 dB/octave) is switched on or off at the back, and a GND terminal takes the turntable's earth wire to minimise hum. The output delivers up to 11 V rms from a 100 Ω output impedance, with channel separation of 80 dB (MM) and 77 dB (MC) at 1 kHz.

In the Scandinavian way, the standby button sits discreetly within the Primare logo on the faceplate: lagom, not too much, not too little, everything in balance, proportion and harmony. Trigger in and out sockets let the R15 switch on and off with a Primare preamplifier or processor, and automatic standby after 20 minutes without a signal saves power. Primare names the R15 as part of the ultimate 15 Series system, together with the DD15 CD transport, the SC15 Prisma preamplifier and network player and the I15 analogue integrated amplifier.

MM gain at 1 kHz, switchable 40 / 45 dB
MC gain at 1 kHz, switchable 60 / 65 dB
MC resistive load in 6 steps 30 - 500 Ω
Maximum output level 11 V rms

Key features

  • MM and MC: sufficient gain for virtually any moving-magnet or moving-coil cartridge
  • Switchable gain: 40 or 45 dB for MM, 60 or 65 dB for MC, at 1 kHz
  • Resistive loading: 2.5 or 47 kΩ for MM; 30 - 500 Ω in 6 steps for MC
  • Capacitive loading: 100, 200, 300 or 400 pF for MM; 100 pF or 1 nF for MC
  • DIP switches for the left and right channels on the back panel
  • Switchable subsonic filter: -3 dB at 12 Hz, 12 dB/octave
  • RIAA correction within ± 0.2 dB; maximum output level 11 V rms
  • Design informed by the larger R35 MM/MC phono preamplifier
  • Compact three-quarter-width 15 Series cabinet, 6.5 kg
  • Standby button within the Primare logo; automatic standby after 20 minutes without signal
  • TRIG IN and TRIG OUT (3.5 mm) for system power control; GND terminal

Made for

  • Turntables fitted with a moving-magnet or moving-coil cartridge
  • Hi-fi systems with a line-level input on a preamplifier or integrated amplifier
  • Primare 15 Series systems with the I15, SC15 Prisma and DD15
  • Systems switched on and off by a Primare preamplifier or processor through the trigger link

In the box

  • R15 MM/MC phono preamplifier
  • Mains cable
  • IR/Trigger cable
  • AC Polarity Pen (with batteries)

Connections

  • Analogue input: 1 × stereo pair RCA (ANALOG IN, left and right) for the cartridge
  • Analogue output: 1 × stereo pair RCA (ANALOG OUT, left and right), 100 Ω
  • GND terminal for the turntable earth wire
  • TRIG IN and TRIG OUT, 3.5 mm mono jack
  • Mains inlet with power switch on the back panel
  • Back-panel controls: MM/MC selector, gain selector, subsonic filter on/off, DIP switches for each channel

Finishes

  • Black
  • Titanium

Primare R15: frequently asked questions

Does the R15 work with moving-coil cartridges?

Yes. The R15 accepts either a moving-magnet or a moving-coil cartridge: set the MM/MC selector on the back panel, then choose 40 or 45 dB of gain for MM, or 60 or 65 dB for MC, with the gain selector.

How do I set the cartridge loading?

Use the DIP switches on the back panel. There is one set for the left and one for the right channel; set both to the same positions. The defaults are 47 kΩ for MM, 500 Ω for MC and 100 pF for both. Start from the values recommended in the cartridge's documentation, and listen to values either side of them to choose the ideal setting for your system.

What do I connect the R15 to?

Connect its left and right RCA outputs to a line-level input of a preamplifier or integrated amplifier with high-quality stereo RCA leads. If the turntable provides a ground connection, connect it to the GND terminal to minimise hum pickup.

Can it switch on with the rest of my Primare system?

Yes. Connect the TRIG OUT of a Primare processor or preamplifier to TRIG IN on the R15 with a mono 3.5 mm jack plug, and the R15 powers on and off with it. Its own TRIG OUT can daisy-chain the trigger signal to further Primare products.

Does the R15 go into standby by itself?

By default it goes into standby when no signal has been present for 20 minutes. To disable this, press and hold the front-panel button until the indicator has flashed twice and stays lit; switching the R15 off and on again with the back-panel switch re-enables it.

Where can I buy the Primare R15 in India?

The Primare R15 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Stereo listening room with a moving-magnet cartridge

Music lovers adding a turntable to a stereo system in the living room or a listening room.

Connections

ConnectTo
Turntable RCA leadsR15 ANALOG IN (left and right)
Turntable ground wireR15 GND terminal
R15 ANALOG OUTLine input of an integrated amplifier or preamplifier

Setup

  1. Set the MM/MC selector to MM and the gain selector to 40 or 45 dB.
  2. Set DIP switch 5 for 47 kΩ or 2.5 kΩ and switches 6 and 7 for 100 to 400 pF, as the cartridge documentation recommends, on both channels.
  3. Connect the turntable, its ground wire and the RCA outputs with high-quality stereo RCA leads.
  4. Connect the mains cable and switch on at the back panel; the R15 goes into standby.
  5. Press the standby button in the middle of the Primare logo to switch on.

Tip: Listen to loading values either side of the recommended ones to choose the ideal setting for your system.

Workflow 2: Moving-coil cartridge in a dedicated listening room

Vinyl enthusiasts using a low-output moving-coil cartridge.

Connections

ConnectTo
MC turntableR15 ANALOG IN
R15 ANALOG OUTPreamplifier line input

Setup

  1. Set the MM/MC selector to MC and choose 60 or 65 dB of gain.
  2. Set DIP switches 1 to 3 for 30, 50, 75, 100, 200 or 500 Ω.
  3. Set DIP switch 4 for 100 pF or 1 nF.
  4. Set the left and right switch banks to the same positions.
  5. Always disconnect the R15 from the mains before changing any cables.

Tip: The MC default is 500 Ω and 100 pF; change it only to the values the cartridge needs.

Workflow 3: Compact 15 Series vinyl system

Listeners with limited space who want a matched Primare system.

Connections

ConnectTo
R15 ANALOG OUTI15 analogue input, for example A2
I15 TRIG OUTR15 TRIG IN (mono 3.5 mm jack)
I15 speaker terminalsPair of loudspeakers

Setup

  1. Place the R15 and I15, both in three-quarter-width 15 Series cabinets, on a rack made for audio equipment.
  2. Connect the R15 output to a free I15 line input.
  3. Link I15 TRIG OUT to R15 TRIG IN so both switch on and off together.
  4. Leave at least 50 mm around the sides and top of each unit for ventilation.

Tip: Primare names the DD15, SC15 Prisma, I15 and R15 as the ultimate 15 Series system.

Workflow 4: Trigger-linked system with a Primare preamplifier

Owners of Primare separates who want one-touch power for the whole system.

Connections

ConnectTo
Preamplifier or processor TRIG OUTR15 TRIG IN
R15 TRIG OUTTRIG IN of a further Primare product

Setup

  1. Connect the TRIG OUT of the Primare processor or preamplifier to TRIG IN on the R15 with a mono 3.5 mm jack plug.
  2. Daisy-chain the R15 TRIG OUT to the next Primare product if needed.
  3. Switch the system on and off from the preamplifier; the R15 follows.

Tip: The R15 is supplied with an IR/Trigger cable.

Workflow 5: Getting the best sound from day one

Every R15 owner setting up the unit for the first time.

Connections

ConnectTo
AC Polarity PenMains cable live pin
Mains cableR15 power connector

Setup

  1. Use the supplied Polarity Pen to find the live pin of the mains cable.
  2. Make sure the live pin goes to the left-hand pin of the power connector, viewed from the back panel.
  3. Keep the R15 away from radiators, stoves and other heat-producing equipment, including other amplifiers.
  4. Play music for about 24 hours of initial burn-in.

Tip: Sound quality keeps improving a little more over at least another three days of playing.

Workflow 6: Everyday listening and power saving

Households that leave the hi-fi connected all day.

Connections

ConnectTo
R15 power switch (back panel)Standby mode
Front standby buttonOn / standby

Setup

  1. Leave the R15 switched on at the back; it waits in standby with the front light dimly lit.
  2. Press the standby button to play; the light blinks for a few seconds, then stays on.
  3. After 20 minutes without a signal the R15 returns to standby by itself.
  4. To disable automatic standby, press and hold the front button until the light has flashed twice.

Tip: Switching off and on again at the back panel re-enables automatic standby.

Request a Quote

PRIMARE R15

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›