







PRIMARE R35
PRICE ON ENQUIRY
Primare R35 MM/MC phono preamplifier: gain up to 76 dB, 21-step MC loading, isolated power supply, RCA and balanced XLR outputs. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
General
| Type | MM/MC phono preamplifier, 35 Series |
| Cartridges | Moving magnet (MM) and moving coil (MC) |
Inputs and outputs
| Phono input | 1 × RCA stereo pair (2 × RCA) |
| Ground | GND terminal |
| RCA output | 1 × stereo pair (2 × RCA), 100 Ω |
| XLR output | 1 × stereo pair (2 × XLR), 200 Ω |
| Maximum output level | 11 V rms |
Gain at 1 kHz
| MM, RCA output | Adjustable 36, 40 or 44 dB |
| MM, XLR output | Adjustable 42, 46 or 50 dB |
| MC, RCA output | Adjustable 62, 66 or 70 dB |
| MC, XLR output | Adjustable 68, 72 or 76 dB |
Cartridge loading
| Resistance, MM | Adjustable 2.5 kΩ or 47 kΩ |
| Resistance, MC | Adjustable 10 Ω - 47 kΩ (21 steps) |
| Capacitance, MM | Adjustable 100, 200, 300 or 400 pF |
| Capacitance, MC | Adjustable 100 pF or 1 nF |
| Default setting | 47 kΩ, 100 pF (MM and MC) |
Performance
| Channel separation | MM 80 dB; MC 77 dB (1 kHz) |
| THD + noise | MM < 0.02 %; MC < 0.03 % (20 Hz - 20 kHz) |
| Signal to noise ratio | MM 85 dB (1 kHz, A-weighted, 5 mV input); MC 76 dB (1 kHz, A-weighted, 0.5 mV input) |
| Subsonic filter | -3 dB at 12 Hz, 12 dB/octave; switchable on / off |
| RIAA correction | ± 0.2 dB |
Controls
| Back panel | MM/MC selector, MM gain and MC gain switches, subsonic filter on / off, loading DIP switches for left and right |
| Front panel | Standby button within the Primare logo, with indicator light |
| Trigger | TRIG IN and TRIG OUT, 3.5 mm mono jack |
General
| Power supply | Fully isolated, fully shielded |
| Power consumption | Standby < 0.5 W; operating < 20 W |
| Automatic standby | After 20 minutes without signal (can be disabled) |
| Dimensions (W × D × H) | 430 × 384 × 92 mm with knobs and connectors |
| Weight | 9.5 kg |
| Colour | Black or titanium |
| Safety | Designed to meet the IEC 60065 international electrical safety standard |
Versions
| R35-BLACK | Black |
| R35-TITANIUM | Titanium |
Product overview
The Primare R35 is the most sophisticated and capable MM/MC phono preamplifier in the Primare range: the ideal interface between the low-level output of a moving magnet or moving coil cartridge and the line-level inputs of a hi-fi system, through RCA or balanced XLR outputs.
The R35 is designed to amplify with honest fidelity the delicate signal from even the lowest-output phono cartridge. Its circuit is carefully crafted so that every component works sympathetically with the others, and a fully isolated, fully shielded power supply lets the highly sensitive signal stages work in a noise-free environment, for cleaner sound and greater fidelity. Specially selected RCA input and output connectors complete the signal path.
Gain is adjustable to suit virtually any moving magnet or moving coil cartridge: 36, 40 or 44 dB for MM and 62, 66 or 70 dB for MC at the RCA outputs, and 6 dB more at each setting from the balanced XLR outputs, up to 76 dB. A very wide range of input adjustments allows ideal cartridge and system matching: 47 kΩ or 2.5 kΩ and 100 to 400 pF for MM, and 21 resistance steps from 10 Ω to 47 kΩ with 100 pF or 1 nF for MC, all set with DIP switches on the back panel. A subsonic filter (-3 dB at 12 Hz, 12 dB/octave) can be switched on or off, and RIAA correction is within ± 0.2 dB.
The R35 adds high-performance vinyl playback to any Primare system, from the I25 and I35 modular integrated amplifiers to the PRE35 modular preamplifier, and its RCA and XLR outputs suit any amplifier or preamplifier with a line-level input. A trigger input lets a Primare processor or preamplifier power it on and off, and the trigger output passes the signal on to further Primare products, so there is no need to switch the R35 on separately.
The R35 follows Primare's Scandinavian design: simple and elegant, with approachable, easy-to-understand functionality, down to the standby button placed discreetly within the Primare logo on the faceplate. Primare calls it lagom: not too much, not too little, everything in balance, proportion and harmony. When no signal is present for 20 minutes the R35 goes into standby to save power, and it comes in black or titanium.
| Moving magnet and moving coil cartridges | MM / MC |
| Gain, MC via XLR (MM up to 50 dB) | Up to 76 dB |
| MC resistance loading, 10 Ω - 47 kΩ | 21 steps |
| RIAA correction | ± 0.2 dB |
Key features
- MM and MC phono preamplifier: Primare's most sophisticated and capable phono stage
- Designed to amplify the delicate signal from even the lowest-output cartridge with honest fidelity
- Fully isolated, fully shielded power supply for a noise-free environment
- Adjustable gain: MM 36, 40 or 44 dB and MC 62, 66 or 70 dB via RCA; 6 dB more via XLR, up to 76 dB
- MM loading: 47 kΩ or 2.5 kΩ; 100, 200, 300 or 400 pF
- MC loading: 10 Ω to 47 kΩ in 21 steps; 100 pF or 1 nF
- Balanced XLR and RCA outputs, 11 V rms maximum output level
- Switchable subsonic filter, -3 dB at 12 Hz, 12 dB/octave; RIAA correction ± 0.2 dB
- Specially selected RCA input and output connectors and a ground terminal
- Trigger in and out (3.5 mm) for system power-up; automatic standby after 20 minutes without signal
- Standby button within the Primare logo; black or titanium
Made for
- Turntables with moving magnet or moving coil cartridges, including the lowest-output types
- Primare systems built on the I25, I35 or PRE35 and their DAC and Prisma versions
- Any amplifier or preamplifier with a line-level RCA or balanced XLR input
- Vinyl playback in stereo listening rooms and living rooms
In the box
- R35 phono preamplifier
- Mains cable
- IR/Trigger cable
- AC Polarity Pen (with batteries)
Connections
- Phono input: 1 × RCA stereo pair (MM or MC)
- GND ground terminal for the turntable earth wire
- Output: 1 × RCA stereo pair, 100 Ω
- Balanced output: 1 × XLR stereo pair, 200 Ω
- TRIG IN and TRIG OUT, 3.5 mm
- Mains power connector, with the power switch on the back panel
Finishes
- Black (R35-BLACK)
- Titanium (R35-TITANIUM)
Primare R35: frequently asked questions
Does the R35 work with moving magnet and moving coil cartridges?
Yes. Set the MM/MC selector on the back panel to the cartridge type, choose one of the three gain settings, and set the loading DIP switches to the values recommended for the cartridge. With up to 76 dB of MC gain via XLR, the R35 is designed for even the lowest-output cartridges.
How do I set the cartridge loading?
Remove the two plates on the back panel by unscrewing the retaining thumb screws, then set the DIP switches up (OFF) or down (ON) as shown in the user guide tables, with the left and right channel switches in the same positions. The default is 47 kΩ and 100 pF for both MM and MC. Primare suggests listening to values either side of the recommended ones to choose the ideal settings for the system.
Should I use the RCA or the XLR outputs?
Either can feed a preamplifier or amplifier: use high-quality stereo RCA leads for the RCA outputs, or balanced XLR cables for the XLR outputs. At each gain setting the XLR outputs give 6 dB more gain than the RCA outputs.
Can the R35 switch on with the rest of my system?
Yes. Connect the TRIG OUT of a Primare processor or preamplifier to the R35 TRIG IN with a mono 3.5 mm jack cable, and the R35 powers on and off with it; its own TRIG OUT can pass the signal on to further Primare products. By default it also goes into standby after 20 minutes without signal, which can be disabled from the front-panel button.
How do I get the best sound from the R35?
Connect the turntable ground wire to the GND terminal to minimise hum. Use the supplied AC Polarity Pen to make sure the live pin of the mains cable goes to the left-hand pin of the power connector, viewed from the back. The R35 starts to sound its best after a burn-in of about 24 hours, with a further smaller improvement over at least another three days of playing.
Where can I buy the Primare R35 in India?
The Primare R35 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Vinyl corner with a Primare I35
Record collectors adding a turntable to a 35 Series stereo system.
Connections
| Connect | To |
|---|---|
| Turntable tonearm leads | R35 RCA phono input |
| Turntable ground wire | R35 GND terminal |
| R35 XLR outputs | I35 balanced input A1 or A2 |
Setup
- Set the MM/MC selector to the cartridge type and choose the gain for the cartridge's output.
- Set the loading DIP switches to the cartridge's recommended values (default 47 kΩ, 100 pF).
- Connect the turntable to the RCA input and its ground wire to GND.
- Connect the R35 XLR outputs to balanced input A1 or A2 of the I35 with balanced XLR cables.
- Switch on at the back panel, press the standby button in the Primare logo and select the input on the I35.
Tip: Give the input the alias PHONO on the I35 so the display names the source.
Workflow 2: Low-output moving coil cartridge
Listeners with a low-output MC cartridge in a dedicated listening room.
Connections
| Connect | To |
|---|---|
| Turntable with MC cartridge | R35 RCA phono input and GND |
| R35 XLR outputs | Preamplifier balanced input |
Setup
- Set the MM/MC selector to MC.
- Choose the MC gain for the cartridge: 62, 66 or 70 dB via RCA, or 68, 72 or 76 dB via XLR.
- Set the MC resistance with DIP switches 1 to 6 (21 steps, 10 Ω to 47 kΩ) and the capacitance with switch 7 (100 pF or 1 nF).
- Listen to values either side of the recommended ones and keep the setting that suits the system.
Tip: Set the left and right channel DIP switches to the same positions.
Workflow 3: Phono stage for a PRE35 separates system
Owners of a Primare preamplifier and power amplifier.
Connections
| Connect | To |
|---|---|
| R35 XLR outputs | PRE35 balanced input |
| PRE35 TRIG OUT | R35 TRIG IN (mono 3.5 mm) |
| R35 TRIG OUT | TRIG IN of a further Primare product |
Setup
- Connect the R35 XLR outputs to a balanced input of the PRE35.
- Connect the PRE35 TRIG OUT to the R35 TRIG IN with a mono 3.5 mm jack cable.
- Daisy-chain the R35 TRIG OUT to the next Primare product if needed.
- Switch the system on from the preamplifier; the R35 follows on and off.
Tip: With the trigger link there is no need to switch the R35 on or off separately.
Workflow 4: Turntable with any stereo amplifier
Homes whose amplifier or receiver has a line-level input but no phono input.
Connections
| Connect | To |
|---|---|
| Turntable | R35 RCA phono input and GND |
| R35 RCA outputs | Amplifier line-level input (RCA) |
Setup
- Place the R35 on a firm rack or stand with at least 50 mm of space around the sides and top.
- Connect the R35 RCA outputs to a line input of the amplifier with high-quality stereo RCA leads.
- Set the MM/MC selector, gain and loading for the cartridge.
- Switch the subsonic filter on or off as preferred and start playing.
Tip: The subsonic filter is -3 dB at 12 Hz with a 12 dB/octave slope.
Workflow 5: Changing cartridges
Vinyl enthusiasts fitting a new MM or MC cartridge.
Connections
| Connect | To |
|---|---|
| New cartridge's recommended load | R35 DIP switches (MM: 8, 9, 10; MC: 1 to 7) |
Setup
- Remove both plates on the back panel by unscrewing the retaining thumb screws.
- For MM, set the resistance with switch 8 (47 kΩ or 2.5 kΩ) and the capacitance with switches 9 and 10 (100 to 400 pF).
- For MC, set the resistance with switches 1 to 6 and the capacitance with switch 7.
- Set the left and right switches to the same positions, refit the plates and check the MM/MC selector and gain.
Tip: The recommended settings are given in the documentation of the cartridge.
Workflow 6: Set-up for the best sound
Every new R35 owner, on the first day.
Connections
| Connect | To |
|---|---|
| AC Polarity Pen | Mains cable live pin |
| Mains cable live pin | Left-hand pin of the R35 power connector |
Setup
- Check the mains phase with the supplied AC Polarity Pen: the live pin goes to the left-hand pin of the power connector, viewed from the back.
- Connect the turntable ground wire to the GND terminal to minimise hum.
- Switch on at the back panel: the front light glows dimly in standby, then press the standby button in the logo.
- To disable automatic standby, hold the front-panel button until the light has flashed twice and stays on.
- Allow an initial burn-in of about 24 hours; the sound improves further over at least three more days.
Tip: Automatic standby comes back on when the R35 is switched off and on at the back panel.








