SONODYNE SM 3200

Product overview

The SONODYNE SM 3200 is a 3 way tri-amplified mid field monitor for larger rooms, with a new 10 inch LF transducer, a 4 inch Kevlar midrange and a 26 mm silk dome tweeter nested in a rotatable waveguide, in an aluminium - MDF hybrid rigid enclosure.

Capable of playing loud and clear, and with excellent detail, the SM 3200 is an ideal reference monitor for larger rooms. Its HF and mids are nested in a rotatable waveguide that, assisted by internal DSP balance, results in exceptional on and off axis response. Dedicated amplifiers deliver 200 W to the woofer and 75 W each to the midrange and tweeter before clipping, for a maximum SPL of 120 dB and a frequency response of 35 Hz - 22 kHz (±2 dB). With the SM 3200, the need for a single monitor for recording and post in a large room is adequately met.

Key features

• 3 way tri-amplified design with internal DSP for crossover and EQ
• Aluminium - MDF hybrid rigid enclosure: extruded aluminium sides; MDF top, bottom, front and rear; vented
• 10 inch PP cone woofer, magnetically shielded
• 4 inch Kevlar cone midrange, magnetically shielded
• 26 mm silk dome tweeter in a rotatable waveguide
• 3 EQs: shelving EQs for LF and HF, bell EQ for MF, plus bass roll-offs at 80 Hz and 100 Hz
• Fully balanced XLR input with link
• Protection against overcurrent, overheat, RFI and switch-on/off transients

Aluminium - MDF hybrid rigid enclosure

The hybrid cabinet combines the strength of aluminium with the acoustic damping of MDF to minimise unwanted resonance. This delivers tighter bass, cleaner transients and a more accurate stereo image. The SONODYNE studio catalogue describes a heavily braced MDF - aluminium hybrid enclosure, finished in black.

Kevlar midrange and rotatable waveguide

The dedicated Kevlar midrange reproduces vocals and instruments with remarkable clarity and natural tonality; its rigid yet lightweight construction ensures excellent transient response and low coloration. A precision-engineered, rotatable aluminium die cast waveguide for mid and high frequency optimises dispersion for consistent off-axis response and a wider listening sweet spot.

3-way tri-amplified design and 3-band acoustic EQ

Dedicated amplifiers for the woofer, midrange and tweeter ensure every frequency is driven with optimum power and precision, for superior clarity, lower distortion and exceptional detail. Three independent EQ controls (2 shelving EQs for LF and HF and 1 bell EQ for MF) and 2 bass roll-offs at 80 Hz and 100 Hz let you tailor the monitor to room acoustics and placement.

High detail and dynamic performance

From the finest sonic nuances to demanding high-level playback, the SM 3200 delivers outstanding resolution, dynamic range and high sound pressure levels without compromising accuracy, making it ideal for critical professional monitoring.

In the box

• SM 3200 active studio monitor

SONODYNE SM 3200: frequently asked questions

What is the SM 3200 designed for?

The SM 3200 is a professional 3-way active studio monitor designed for recording, mixing, mastering and post-production, with the accuracy, dynamics and headroom required for critical listening in larger rooms.

Why does the SM 3200 use a hybrid aluminium - MDF enclosure?

The hybrid enclosure combines the structural rigidity of aluminium with the acoustic damping of MDF. This minimises cabinet resonance, reduces coloration and delivers a more accurate and controlled sound.

Can the SM 3200 be adjusted for different studio rooms?

Yes. Three acoustic EQ controls and the 80 Hz / 100 Hz bass roll-offs let you tailor its response to your room acoustics and speaker placement.

Is the SM 3200 suitable for immersive audio studios?

Yes. Its accurate frequency response, high output capability and consistent imaging make the SM 3200 well suited for professional stereo as well as immersive audio monitoring applications.

Where can I buy the SONODYNE SM 3200 in India?

The SONODYNE SM 3200 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Large control room

Engineers who need one reference monitor for recording and post in a large room.

Connections

Setup

1. Place a pair of SM 3200 monitors in the control room.
2. Connect each monitor's XLR input to a balanced monitor output.
3. Switch on and set the gain control.
4. Set the shelving and mid EQs to suit the room.

Tip: The 120 dB maximum SPL gives headroom for loud, clear monitoring in larger rooms.

Workflow 2: Mixing and mastering

Mixing and mastering engineers who need a neutral reference.

Connections

Setup

1. Connect the monitor controller to both monitors over balanced XLR.
2. Match the gain on both monitors.
3. Adjust the EQs for a neutral response at the listening position.

Tip: The rotatable waveguide gives consistent off-axis response and a wider sweet spot.

Workflow 3: Post-production suite

Post-production engineers working to picture.

Connections

Setup

1. Connect the balanced outputs to the XLR inputs.
2. Set the gain control.
3. Use the 80 Hz or 100 Hz bass roll-off where the placement needs it.

Tip: The 10 inch woofer extends down to 35 Hz (±2 dB).

Workflow 4: Immersive audio room

Studios building multichannel monitoring systems.

Connections

Setup

1. Position the monitors for the multichannel layout.
2. Connect each output to its monitor's XLR input.
3. Set the gain controls and EQs to match the monitors in the room.

Tip: Accurate frequency response and consistent imaging suit immersive audio monitoring.

Workflow 5: Recording studio

Recording engineers tracking bands and vocals.

Connections

Setup

1. Connect the console's balanced monitor outputs.
2. Set the gain controls.
3. Set the low shelving EQ for the room's bass response.

Tip: The Kevlar midrange reproduces vocals and instruments with natural tonality.

Workflow 6: Shared feed between monitors

Rooms where one feed drives more than one monitor.

Connections

Setup

1. Connect the source to the first monitor's XLR input.
2. Pass the signal on from the LINK socket to the next monitor.
3. Set each monitor's gain control.

Tip: Protection against overcurrent, overheat, RFI and switch-on/off transients.