SONODYNE WP BREAKOUT

Product overview

The SONODYNE WP BREAKOUT is an accessory box that powers up to two audio wall panels and breaks out their audio, from the AUSTRALIAN MONITOR ZONEMIX zoning solutions.

24 V is provided to the wall panels and the wall panel balanced audio is converted into unbalanced audio for connection into any audio system. Multiple WP BREAKOUT units can be daisy chained from one power supply, up to 15 units, for a minimal installation footprint. It supports the WPBT and WPML wall panels.

Key features

• Supports the WPBT and WPML wall panels
• Provides 24 V power to wall panels
• Converts wall panel balanced audio to unbalanced audio
• Rear panel gain adjustment
• Supports up to two wall panels
• Power output to daisy chain up to 15 WP BREAKOUT units from one power supply

Rear panel

The rear carries two RJ45 ports marked WP 1 and WP 2 for the wall panels, two unbalanced RCA outputs marked OUT 1 and OUT 2 (left and right) each with a GAIN control, the 24VDC 0.5A power input, a terminal marked PWR and GND, and an ON indicator.

Power

The power supply takes 100-240 V AC, 50-60 Hz, and the WP BREAKOUT runs on 24 V DC.

In the box

• WP BREAKOUT

SONODYNE WP BREAKOUT: frequently asked questions

Which wall panels does it support?

The WPBT Bluetooth audio receiver and the WPML audio input wall panel, up to two per WP BREAKOUT.

What does it do with the audio?

It converts the balanced audio of the wall panels into unbalanced audio on RCA outputs, with rear gain adjustment.

Can several units share one power supply?

Yes. Up to 15 WP BREAKOUT units can be daisy chained from one power supply.

Where can I buy the SONODYNE WP BREAKOUT in India?

The SONODYNE WP BREAKOUT is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Bluetooth wall panel into a mixer

Venues adding a guest Bluetooth source.

Connections

Setup

1. Connect the WPBT to WP 1.
2. Connect OUT 1 to the audio system.
3. Set the level with the GAIN control.

Tip: The WP BREAKOUT powers the panel with 24 V.

Workflow 2: Two input panels

Rooms with both a Bluetooth and a mic / line input panel.

Connections

Setup

1. Connect both panels.
2. Connect both outputs.
3. Set each GAIN control.

Tip: Up to two wall panels per unit.

Workflow 3: Several rooms, one supply

Sites with wall panels in many rooms.

Connections

Setup

1. Power the first unit from the supply.
2. Daisy chain the power to the next units.

Tip: Up to 15 units from one power supply.

Workflow 4: Mic / line wall panel

Presenters plugging a microphone into a wall panel.

Connections

Setup

1. Connect the WPML.
2. Connect OUT 1.
3. Set the gain.

Tip: The balanced panel audio leaves as unbalanced RCA audio.

Workflow 5: Compact installation

Installers with little rack or wall space.

Connections

Setup

1. Place the box near the audio system.
2. Run cables to the wall panels.

Tip: Dimensions 144 x 124 x 47 mm.

Workflow 6: Checking power

Commissioning engineers.

Connections

Setup

1. Connect the supply.
2. Check the ON indicator.

Tip: The supply takes 100-240 V AC, 50-60 Hz.